The new advanced TIG hot wire process
enables overlay welding with unrivaled
performance in a significantly more compact
design.
www.fronius.com
HGH PERFORMANCE ULTRA COMPACT
– Significant improvement of welding speed and deposition
rate compared to the conventional TIG hot wire welding
process
– Ultra-compact torch design allows welding from a
component inner diameter of 76 mm (3 inches)
SMPLFED TORCH DESGN
– Only one electrode and one filler wire
– Swiveling torch head with stops for adjusting the optimum
electrode angle
– Quick and easy adjustment of the wire position
– Simple and rapid torch replacement with the new quick-
mounting system
READY FOR A NEW SYSTEM GENERATION
Increased welding speed*
up to 135 cm/min (53.14 inches/min)
140
120
100
80
60
40
20
Increased deposition rate*
up to 6 kg/h (13.22 lbs/h)
7,0
6,0
5,0
4,0
3,0
2,0
1,0
– SpeedClad 2.0 is available on all new Fronius overlay welding
systems with the new HMI-T21 system controller:
Compact Cladding Cell, ETR, ETR Ultimate, Conventional
Cladding System
Conventional TIG hot wire (Wire Ø = 1 x 1,2mm)
SpeedClad 2.0 (Wire Ø = 1 x 1,6 mm)
*Depending on the application
Loading...