Fronius sheet FOW pipe cladding Flyer [EN]

/ Perfect Welding / Solar Energy / Perfect Charging

RISER PIPES

Industry: OIl- & Gas Industry

/ Overlay welding system for inside cladding of pipes.

WOr kpIec e data

Workpiece description: Riser pipes

Material: Steel

Workpiece length (A): 1,3 - 12,8 m

Outside diameter (B): 165 - 914 mm*

Inside diameter (C): 152 - 863,6 mm*

Weight: max. 17 t (37478 lbs)

(C)

WeldInG prOcess data

Welding process: TIG HW. TWIN

Welding speed: 60 cm/min

Welding position: PA
Layers: 2

Deposition rate:

(4.3 - 42 ft)

(6.5 - 36 in)*

(6 - 34 in)*

(A)

(23.63 in/min)

4 kg/h (8,82 lbs/h)

(B)

turntable

/ Hollow shaft
/ Special clamping system accom­modates ASTM pipe tolerances

tIG
HW

tWIn

WeldHead cOnfIGuratIOn

/ Water cooled shield
/ 2x TIG machine torch (twin wire)
/ 2x ArcView camera module
/ AVC-Function independently for
both torches
/ Oscillation unit

carrIaGe fOr tOrcH mOtIOn
and WIre feeder unI ts

/ 2x wire feeder KD 1500 D-11
/ Integrated D300 spools (15 kg/ 33 lbs)
or big spools (140 kg/ 308.6 lbs)

tI G- HW
pOWer sOurce-set

/ 2x TransTIG 5000
/ 2x TransTIG 2200

Water cHIller

/ 3x water chiller for water­cooled shield, torch and camera
module

* Minimum-diameter depends on pipe length and
wall thickness!

HydraulIc rOpe tensIOnInG devIce

OperatOr panel

/ HMI system controller with
remot control HMI-RC
/ Operator panel for ArcView
camera module

Non-liability: Fronius International GmbH give no guarantee for the above content and cannot be held liable for any results obtained!

It is not allowed to publish this document on the web!

Ref:807197