/ Perfect Welding / Solar Energy / Perfect Charging
tIg
ROD-shapeD COmpOnents
Industry: Power generatIon
/ Multi-welding system for overlay-, longitudinal- and circular welding of rod-shaped components in the power generation industry.
mIcro
Plasma
wor kPIece data
Workpiece description: Rod-shaped components
Material: CrNi steel, Ni-Fe alloy
Max. length: 1500 mm (59.05 in)
Outside diameter 6 - 50 mm (0.23 - 1.96 in)
weldIng Process data
Welding process: TIG, Plasma
Welding speed: 20 - 60 cm/min
(7.87 - 23.62 in/min)
Welding position: PA, PB, PC
overlay (sPIral)
longItudInal
cIrcular
cIrcular (face)
statIon 2
/ Rotation unit
/ Double gripper chucks
/ Hollow shaft
/ Manual tiltable +90° / -90°
/ Manual height adjustable
oPerator Panel
/ HMI system controller with
remote control HMI-RC
/ Operator panel for ArcView
camera
tIg Power source-set
/ TransTig 3000 power source
/ Chilly 08 cooling unit
/ KD 7000 D-11 wire feeder
statIon 1
/ Rotation unit
/ Double gripper chucks
/ Hollow shaft
weldhead confIguratIon
/ Console with motorized carriage
/ Motorized slides for horizontal &
vertical torch motion
/ Lightning protection
/ TTW machine torch
/ PTW 500 Plasma machine torch
/ ArcView camera
Pl asm a
Power source-set
/ TransTig 800 power source
/ PlasmaModule 10
/ FK 4000-R cooling unit
/ KD 7000 D-11 wire feeder
roller steady
/ Manual positioning
/ Adjustable for dierent
workpiece diameters
taIlstock
/ Tailstock with centering cone
Non-liability: Fronius International GmbH give no guarantee for the above content and cannot be held liable for any results obtained!
It is not allowed to publish this document on the web!
Ref:809204
Loading...