Page 1/9
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/26/2022 Reviewed on 04/26/2022
1 Identification
Product identifier
Trade name:
Article number:
Application of the substance / the mixture
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Fronius International GmbH
Fronius Straße 5
A-4642 Sattledt
T: +43 7242 241 0
Information department:
welding.techsupport@fronius.com
msds.techsupport@fronius.com
Emergency telephone number:
+43 7242 241 0
Available:
Mo - Th: 08:00 - 16:00 h (CET)
Fr: 08:00 - 12:00 h (CET)
Please contact your regional poison center or emergency call!
Printing white
42,0510,0391
Auxiliary for electrolytic cleaning and polishing.
2 Hazard(s) identification
Classification of the substance or mixture
The product is not classified, according to the Globally Harmonized System (GHS).
Label elements
GHS label elements
Hazard pictograms
Signal word
Hazard statements
Classification system:
NFPA ratings (scale 0 - 4)
Void
0
0
HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
0
Void
Void
Void
Health = 0
Fire = 0
Reactivity = 0
0
Health = 0
Fire = 0
0
Reactivity = 0
0
(Contd. on page 2)
US
54.0.17
Page 2/9
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/26/2022 Reviewed on 04/26/2022
Trade name:
Printing white
(Contd. of page 1)
Other hazards
Results of PBT and vPvB assessment
PBT:
Not applicable.
vPvB:
Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:
Dangerous components:
Mixture of the substances listed below with nonhazardous additions.
Void
4 First-aid measures
Description of first aid measures
General information:
In case of discomfort or doubt, seek medical advice.
If unconscious, use a stable lateral position and do not administer anything through mouth.
After inhalation:
After skin contact:
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
After eye contact:
Rinse opened eye for several minutes under running water.
Remove contact lenses, if present and easy to do. Continue rinsing.
Seek medical treatment in case of complaints.
After swallowing:
Rinse out mouth and then drink plenty of water.
Induce vomiting and call for medical help.
Most important symptoms and effects, both acute and delayed
No further relevant information available.
Indication of any immediate medical attention and special treatment needed
Depending on the condition of the patients, the doctor must assess the symptoms and the overall general
condition.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
Advice for firefighters
Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.
(Contd. on page 3)
US
54.0.17
Page 3/9
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/26/2022 Reviewed on 04/26/2022
Trade name:
Printing white
(Contd. of page 2)
6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Restricted access to the affected area until cleaning work is completed.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Do not breathe vapour/spray.
Environmental precautions:
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage
system.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose of the collected material according to regulations.
Protective Action Criteria for Chemicals
PAC-1:
None of the ingredients is listed.
PAC-2:
None of the ingredients is listed.
PAC-3:
None of the ingredients is listed.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
Precautions for safe handling
No special measures required.
Keep receptacles tightly sealed.
Use personal protective equipment as required.
Observe protective measures and safety instructions.
Information about protection against explosions and fires:
No special measures required.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:
Store in a cool location.
Ensure adequate ventilation.
Store in accordance with local/regional/national/international regulations.
Information about storage in one common storage facility:
Further information about storage conditions:
Recommended storage temperature:
Storage class:
12
room temperature
Keep receptacle tightly sealed.
Not required.
(Contd. on page 4)
US
54.0.17
Loading...