Issued by:
Ramana Tangirala
Ramana Tangirala
Certificate of Compliance
Certificate: 2275241 Master Contract: 203213 (203213)
Project: 70165662 Date Issued: 2018-01-17
Issued to: Fronius International GmbH
Guenter Fronius Strasse 1
Wels-Thalheim, 4600
AUSTRIA
Attention: Josef Feichtinger
The products listed below are eligible to bear the CSA Mark shown
with adjacent indicators 'C' and 'US' for Canada and US or with adjacent
indicator 'US' for US only or without either indicator for Canada only.
PRODUCTS
CLASS - C561103 - WELDING MACHINES
CLASS - C561183 - WELDING MACHINES-Certified to US Standards
Model “VR 5000 Rob”, followed with suffixes, Wire Feeders for MIG/MAG process, Input rated: 24Vdc,2A,
55Vdc, 1.2A, supplied from a certified welding power source specified by Fronius. Weld rated: 360A at 100%;
450A at 60%. IP20.
APPLICABLE REQUIREMENTS
CAN/CSA E60974-1 - Arc Welding Equipment – Part 1: Welding Power Sources
CAN/CSA E60974-5 - Arc Welding Equipment – Part 5: Wire Feeders
ANSI/IEC 60974-1 - Arc Welding Equipment; Part 1: Welding Power Sources
ANSI/IEC 60974-5 - Arc Welding Equipment – Part 5: Wire feeders
DQD 507 Rev. 2016-02-18 Page 1
Loading...