Fronius CSA Certificate TransTig 4000 TransTig 5000 Magic Wave 4000 Magic Wave 5000 Certificate [EN]
Issued by:
Alessandro Raspatelli
Alessandro Raspatelli
Certificate of Compliance
Certificate: 1668721 Master Contract: 203213
Project: 80143908 Date Issued: 12/14/2022
Issued to: Fronius International GmbH
Guenter Fronius Strasse 1
Wels-Thalheim, Upper Austria 4600
Austria
Attention: Josef Feichtinger
The products listed below are eligible to bear the CSA Mark shown with adjacent
indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US
only or without either indicator for Canada only.
PRODUCTS
C561103 WELDING MACHINES - Welding Machines
C561183 WELDING MACHINES - Certified to US Standards
PART A:
Inverter type welding power sources, for DC TIG and Rod Electrode welding processes. IP-23.
Models Input Rating Phase Input
Frequency
(Hz)
Output Rating Open Circuit
Voltage (OCV)
(V max)
TT 4000
(TransTig
4000)
380-460V, 26A(max.), 17A(eff.)
/ 200-240V, 49A(max), 33A(eff.)
3 50 or 60 22V, 300Adc, 100% Duty Cycle; 24.4V,
360Adc, 60% Duty Cycle; 26V, 400Adc,
45% Duty Cycle
86Vpeak
TT 5000
(TransTig
5000)
380-460V, 35A(max.), 22A(eff.)
/ 200-240V, 67A(max), 42A(eff)
3 50 or 60 24V, 350Adc, 100% Duty Cycle; 27.6V,
440Adc, 60% Duty Cycle; 30V, 500Adc,
40% Duty Cycle
86Vpeak
QD 507 Rev 2019-04-30
© 2022 CSA Group. All rights reserved.
Page 1
PART B:
Inverter type welding power sources, for DC/AC TIG and Rod Electrode welding processes. IP-23.
Models Input Rating Phase Input
Frequency
(Hz)
Output Rating Open Circuit
Voltage (OCV)
(V max)
MW 4000
(MagicWave
4000)
380-460V, 31A(max.),
21A(eff.) / 200-240V, 58A
(max), 39A(eff.)
3 50 or 60 22V, 300Adc/ac, 100% Duty Cycle;
24.4V, 360Adc/ac, 60% Duty Cycle;
26V, 400Adc/ac, 45% Duty Cycle
90Vpeak
MW 5000
(MagicWave
5000)
380-460V, 38A(max.),
24A(eff.) / 200-240V, 72A
(max), 46A(eff.)
3 50 or 60 24V, 350Adc/ac, 100% Duty Cycle;
27.6V, 440Adc/ac, 60% Duty Cycle;
30V, 500Adc/ac, 40% Duty Cycle
90Vpeak
PART C: OPTIONAL ACCESSORIES
(a). Water coolers, intended as accessories to models shown in part A and B.
Models Power Pressure (Bar) Input Rating
FK9000-R (Alternate name FK9000-R Pipe) 2.8kW at 1liter/minute 6 230/460Vac, 2.7/1.3A derived from power source
Models Power Input Rating
FK4000R (FC and ROB) water coolers 2KW at 1 liter/ minute 400Vac, 0.6A derived from power source
(b). Wire Feeders for TIG process, supplied from the power source in part A and B or from the power supply Model “KD
Supply”. IP23.
Models Input Voltage (VDC) Input Current (A) Conventional Welding Current (I2) (A)
KD 4000D-11, KD 7000D-11 55 4 360A at 100%; 450A at 60%.
(c). remote control units operating at isolated extra-low voltage provided by the power source.
Models
TR1600, TR2200-F, TR2200-FM, RCU2000
PART D:
Inverter type welding power sources, for DC/AC MIG/MAG and Rod Electrode welding processes. IP-23.
Certificate: 1668721
Project: 80143908
Master Contract: 203213
Date Issued: 12/14/2022
QD 507 Rev 2019-04-30
© 2022 CSA Group. All rights reserved.
Page 2
Loading...