Fronius CSA Certificate TransSteel 3000c PULSE/nc / 3500 / 3500c / 4000 PULSE/nc / 5000 / 5000 PULSE/nc Certificate [EN]

Certificate:

2275242

Master Contract:

203213

Project:

80047843

Date Issued:

2020-06-29

Issued To:

Fronius International GmbH

Guenter Fronius Strasse 1

Wels-Thalheim, ., 4600

Austria

The products listed below are eligible to bear the CSA Mark shown with

adjacent indicators 'C' and 'US' for Canada and US or with adjacent

indicator 'US' for US only or without either indicator for Canada only.

Issued by:

Ramana Tangirala
Ramana Tangirala

CLASS - C561103 - WELDING MACHINES

CLASS - C561183 - WELDING MACHINES Certified to US Standards

Certificate of Compliance

Attention: Josef Feichtinger

PRODUCTS

PART A:

PART A1:
Model TransSteel 5000 (TSt 5000) followed by suffixes, inverter type welding power sources, for MIG/MAG

and Rod Electrode welding processes, rated as follows:
Input: 460V, 38A(max.), 24A(eff.) / 380/400V, 44A (max), 28A(eff.); 3 phase, 50 or 60Hz; Output: 32.0V,
360Adc, 100% Duty Cycle; 35.0V, 420Adc, 60% Duty Cycle; 39.0V, 500Adc, 40% Duty Cycle, IP-23.
Max. OCV: 65Vpeak

DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 1

Certificate: 2275242
Project: 80047843

Master Contract: 203213

Date Issued: 2020-06-29

PART A2:
Model TransSteel 5000 PULSE /nc (TSt 5000 PULSE) followed by suffixes, inverter type welding power

sources, for MIG/MAG and Rod Electrode welding processes, rated as follows:
Input: 460V, 38A(max.), 24A(eff.) / 380/400V, 44A (max), 28A(eff.); 3 phase, 50 or 60Hz; Output: 32.0V,
360Adc, 100% Duty Cycle; 35.0V, 420Adc, 60% Duty Cycle; 39.0V, 500Adc, 40% Duty Cycle, IP-23.
Max. OCV: 65Vpeak

PART A3:
Model TransSteel 4000 PULSE /nc (TSt 4000 PULSE) followed by suffixes, inverter type welding power

sources, for MIG/MAG and Rod Electrode welding processes, rated as follows:
Input: 460V, 27A(max.), 22A(eff.) / 380/400V, 32A (max), 25A(eff.); 3 phase, 50 or 60Hz; Output: 31.0V,
340Adc, 100% Duty Cycle; 32.5V, 370Adc, 60% Duty Cycle; 34.0V, 400Adc, 40% Duty Cycle, IP-23.
Max. OCV: 65Vpeak

PART B:

PART B1:
Model TransSteel 3500 (TSt 3500) followed by suffixes, inverter type welding power sources, for MIG/MAG

and Rod Electrode welding processes, rated as follows:
Input: 460V, 24A(max.), 15A(eff.) / 380/400V, 27A (max), 17A(eff.); 3 phase, 50 or 60Hz; Output: 26.5V,
250Adc, 100% Duty Cycle; 29.0V, 300Adc, 60% Duty Cycle; 31.5V, 350Adc, 40% Duty Cycle, IP-23.
Max. OCV: 60Vpeak

PART B2:

Alternate construction:

Model TransSteel 3500 (TSt 3500) followed by suffixes, inverter type welding power sources, for MIG/MAG
and Rod Electrode welding processes, rated as follows:
Input: 460V, 21A(max.), 13A(eff.) / 380/400V, 24A (max), 16A(eff.); 3 phase, 50 or 60Hz; Output: 26.5V,
250Adc, 100% Duty Cycle; 29.0V, 300Adc, 60% Duty Cycle; 31.5V, 350Adc, 40% Duty Cycle, IP-23.
Max. OCV: 59Vpeak

PART C: ACCESSORIES:

Remote control units employed in conjunction with power sources (TSt 3500/5000): TR2000, TR3000, Rob5000
TSt, Rob5000 OC TSt, Rob3000, “Unibox” [Profibus 12MB TSt, CanOpen TSt, Interbus D-Sub TSt, Interbus
LWL TSt, DeviceNet Economy TSt and EtherCAT TSt.

PART D:

PART D1:
Model TransSteel 3500c (TSt 3500c) followed by suffixes, inverter type welding power sources / wire feeder,

for MIG/MAG and Rod Electrode welding processes, rated as follows:
Input: 460V, 21A(max.), 13A(eff.) / 380/400V, 24A (max), 16A(eff.); 3 phase, 50 or 60Hz; Output: 26.5V,
250Adc, 100% Duty Cycle; 29.0V, 300Adc, 60% Duty Cycle; 31.5V, 350Adc, 40% Duty Cycle, IP-23.
Max. OCV: 59Vpeak.

DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 2