DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 1
Certificate of Compliance
Certificate:
2669413
Master Contract:
203213
Project:
80109677
Date Issued:
May 10, 2022
Issued To:
Fronius International GmbH
Guenter Fronius Strasse 1
Wels-Thalheim, Upper Austria, 4600
Austria
Attention: Bernhard Haidinger
The products listed below are eligible to bear the CSA Mark shown with
adjacent indicators 'C' and 'US' for Canada and US or with adjacent
indicator 'US' for US only or without either indicator for Canada only.
Issued by:
Sven Renke
Sven Renke
PRODUCTS
CLASS - C561183 - WELDING MACHINES Certified to US Standards
CLASS - C561103 - WELDING MACHINES Welding Machines
PART A:
PART A1:
Model TPS 500i (/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 460V, 35A(max.), 22A(eff.) / 400V, 38A (max), 24A(eff.); 3 phase, 50 or 60Hz
Output: 32.0V, 360Adc, 100% Duty Cycle; 35.5V, 430Adc, 60% Duty Cycle; 39.0V, 500Adc, 40% Duty Cycle
Max. OCV: 82Vpeak
IP-23
Certificate: 2669413
Project: 80109677
Master Contract: 203213
Date Issued: May 10, 2022
DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 2
PART A2:
Model TPS 400i (/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 460V, 24A(max.), 15A(eff.) / 400V, 26A (max), 16A(eff.); 3 phase, 50 or 60Hz
Output: 30.0V, 320Adc, 100% Duty Cycle; 32.0V, 360Adc, 60% Duty Cycle; 34.0V, 400Adc, 40% Duty Cycle
Max. OCV: 83Vpeak
IP-23
PART A3:
Model TPS 320i (/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 460V, 18A(max.), 12A(eff.) / 400V, 20A (max), 13A(eff.); 3 phase, 50 or 60Hz
Output: 26.0V, 240Adc, 100% Duty Cycle; 27.0V, 260Adc, 60% Duty Cycle; 30.0V, 320Adc, 40% Duty Cycle
Max. OCV: 84Vpeak
IP-23
PART A4:
Model TPS 400i LSC ADV (/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and
Rod Electrode welding processes, rated as follows:
Input: 460V, 24A(max.), 15A(eff.) / 400V, 26A (max), 17A(eff.); 3 phase, 50 or 60Hz
Output: 30.0V, 320Adc, 100% Duty Cycle; 32.0V, 360Adc, 60% Duty Cycle; 34.0V, 400Adc, 40% Duty Cycle
Max. OCV: 84Vpeak
IP-23
PART A5:
Model TPS 600i (/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 460V, 51A(max.), 39A(eff.) / 400V, 58A (max), 45A(eff.); 3 phase, 50 or 60Hz
Output: 39.0V, 500Adc, 100% Duty Cycle; 44.0V, 600Adc, 60% Duty Cycle
Max. OCV: 85Vpeak
IP-23
PART B:
PART B1:
Model TPS 500i (/600V/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 575V, 31A(max.), 20A(eff.); 3 phase, 50 or 60Hz
Output: 32.0V, 360Adc, 100% Duty Cycle; 35.5V, 430Adc, 60% Duty Cycle; 39.0V, 500Adc, 40% Duty Cycle
Max. OCV: 71Vpeak
IP-23
PART B2:
Model TPS 400i (/600V/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 575V, 23A(max.), 15A(eff.); 3 phase, 50 or 60Hz
Certificate: 2669413
Project: 80109677
Master Contract: 203213
Date Issued: May 10, 2022
DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 3
Output: 30.0V, 320Adc, 100% Duty Cycle; 32.0V, 360Adc, 60% Duty Cycle; 34.0V, 400Adc, 40% Duty Cycle
Max. OCV: 68Vpeak
IP-23
PART B3:
Model TPS 320i (/600V/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 575V, 17A(max.), 11A(eff.); 3 phase, 50 or 60Hz
Output: 26.0V, 240Adc, 100% Duty Cycle; 27.0V, 260Adc, 60% Duty Cycle; 30.0V, 320Adc, 40% Duty Cycle
Max. OCV: 67Vpeak
IP-23
PART B4:
Model TPS 400i LSC ADV (/600V/nc) followed by suffixes, inverter type welding power sources, for
MIG/MAG and Rod Electrode welding processes, rated as follows:
Input: 575V, 23A(max.), 15A(eff.); 3 phase, 50 or 60Hz
Output: 30.0V, 320Adc, 100% Duty Cycle; 32.0V, 360Adc, 60% Duty Cycle; 34.0V, 400Adc, 40% Duty Cycle
Max. OCV: 70Vpeak
IP-23
PART B5:
Model TPS 600i (/600V/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 575V, 49A(max.), 38A(eff.); 3 phase, 50 or 60Hz
Output: 39.0V, 500Adc, 100% Duty Cycle; 44.0V, 600Adc, 60% Duty Cycle
Max. OCV: 73Vpeak
IP-23
PART C:
PART C1:
Model TPS 500i (/MV/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 460V, 33A(max.), 21A(eff.) / 230V, 63A (max), 39A(eff.); 3 phase, 50 or 60Hz
Output: 32.0V, 360Adc, 100% Duty Cycle; 35.5V, 430Adc, 60% Duty Cycle; 39.0V, 500Adc, 40% Duty Cycle
Max. OCV: 68Vpeak
IP-23
PART C2:
Model TPS 400i (/MV/nc) followed by suffixes, inverter type welding power sources, for MIG/MAG and Rod
Electrode welding processes, rated as follows:
Input: 460V, 23A(max.), 14A(eff.) / 230V, 42A (max), 27A(eff.); 3 phase, 50 or 60Hz
Output: 30.0V, 320Adc, 100% Duty Cycle; 32.0V, 360Adc, 60% Duty Cycle; 34.0V, 400Adc, 40% Duty Cycle
Max. OCV: 67Vpeak
IP-23
Loading...