DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 1
Certificate of Compliance
Certificate:
70071149
Master Contract:
203213
Project:
80143947
Date Issued:
2023-02-21
Issued To:
Fronius International GmbH
Guenter Fronius Strasse 1
Wels-Thalheim, Upper Austria, 4600
Austria
Attention: Josef Feichtinger
The products listed below are eligible to bear the CSA Mark shown with
adjacent indicators 'C' and 'US' for Canada and US or with adjacent
indicator 'US' for US only or without either indicator for Canada only.
Issued by:
Alessandro Raspatelli
Alessandro Raspatelli
PRODUCTS
CLASS - C561103 - WELDING MACHINES Welding Machines
CLASS - C561183 - WELDING MACHINES Certified to US Standards
PART A:
Model TransPocket 180 (Alternate name TP 180) followed by suffixes, inverter type welding power sources,
for Rod Electrode and TIG welding processes, rated as follows:
Input: 240V, 24A(max.), 15A(eff.); 1 phase, 50 or 60Hz Output: 24.8V, 120A, 100% Duty Cycle; 26.0V, 150A,
60% Duty Cycle; 27.2V, 180A, 40% Duty Cycle, 18.8V, 220A, 40% Duty Cycle,
Input: 120V, 28A(max.), 20A(eff.); 1 phase, 50 or 60Hz Output: 23.6V, 90A, 100% Duty Cycle; 24.0V, 100A,
60% Duty Cycle; 24.8V, 120A, 40% Duty Cycle, 16.8V, 170A, 40% Duty Cycle
Input: 120V, 19A(max.), 15A(eff.); 1 phase, 50 or 60Hz Output: 22.6V, 65A, 100% Duty Cycle; 22.8V, 70A,
60% Duty Cycle; 23.4V, 85A, 40% Duty Cycle, 15.2V, 130A, 40% Duty Cycle
Max. OCV: 101Vpeak
Certificate: 70071149
Project: 80143947
Master Contract: 203213
Date Issued: 2023-02-21
DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 2
IP-23
PART B:
Model TransPocket 180 TIG (Alternate name TP 180 TIG) followed by suffixes, inverter type welding power
sources, for Rod Electrode and TIG welding processes, rated as follows:
Input: 240V, 24A(max.), 15A(eff.); 1 phase, 50 or 60Hz Output: 24.8V, 120A, 100% Duty Cycle; 26.0V, 150A,
60% Duty Cycle; 27.2V, 180A, 40% Duty Cycle, 18.8V, 220A, 40% Duty Cycle,
Input: 120V, 28A(max.), 20A(eff.); 1 phase, 50 or 60Hz Output: 23.6V, 90A, 100% Duty Cycle; 24.0V, 100A,
60% Duty Cycle; 24.8V, 120A, 40% Duty Cycle, 16.8V, 170A, 40% Duty Cycle
Input: 120V, 19A(max.), 15A(eff.); 1 phase, 50 or 60Hz Output: 22.6V, 65A, 100% Duty Cycle; 22.8V, 70A,
60% Duty Cycle; 23.4V, 85A, 40% Duty Cycle, 15.2V, 130A, 40% Duty Cycle
Max. OCV: 101Vpeak
IP-23
PART C: ACCESSORIES for Model “TransPocket 180”:
Remote control units employed in conjunction with power source TransPocket 180 are TTG 2200A.
PART D:
Model TransPocket 180 MV/RC/HW (Alternate name TP 180 MV/RC/HW) followed by suffixes, inverter
type welding power sources, for TIG welding processes, rated as follows:
Input: 240V, 7A(max.), 5A(eff.); 1 phase, 50 or 60Hz Output: 6.0V, 125A, 100% Duty Cycle; 6.0V, 155A, 60%
Duty Cycle; 6.0V, 180A, 35% Duty Cycle
Input: 120V, 13A(max.), 9A(eff.); 1 phase, 50 or 60Hz Output: 6.0V, 125A, 100% Duty Cycle; 6.0V, 155A, 60%
Duty Cycle; 6.0V, 170A, 35% Duty Cycle
Max. OCV: 35Vpeak
IP-23
NOTE:
The equipment is generally provided with power plug and cord. If the equipment is not provided with power plug,
suitable power plug need to be selected per approval of the Local Inspection Authority.
APPLICABLE REQUIREMENTS
CSA C22.2 No. 60974-1:19 Arc welding equipment — Part 1: Welding power sources (IEC
60974-1:2017, MOD)
ANSI/NEMA/IEC 60974-1:2019 Arc Welding Equipment Part 1: Welding Power Sources
MARKINGS
The manufacturer is required to apply the following markings:
• Products shall be marked with the markings specified by the particular product standard.
• Products certified for Canada shall have all Caution and Warning markings in both English and French.
Loading...