Certificate of Compliance
Certificate:
Project:
Issued to: Fronius International GmbH
2260796
2260796
Guenter Fronius Strasse 1
Wels-Thalheim, 4600
Austria
Attention: Mr. Josef Feichtinger
The products listed below are eligible to bear the CSA
Mark shown with adjacent indicators 'C' and 'US' for
Canada and US or with adjacent indicator 'US' for
US only or without either indicator for Canada only.
Issued by:
Master Contract:
Date Issued:
Ramana Tangirala,
P.Eng.
Ramana Tangirala, P.Eng.
203213
2010/01/21
PRODUCTS
CLASS 5611 81
CLASS 5611 01
PART A:
-Model TP 1500 x USA (TransPocket 1500 x USA), inverter type welding power sources, for DC Rod
Electrode and DC TIG welding processes, rated as follows:
Input: 230V, 30A(max.), 16A(eff.); 1 phase, 50 or 60Hz; Output: 23.2V, 80Adc, 100% Duty Cycle; 24.0V,
100Adc, 60% Duty Cycle; 25.6V, 140Adc, 30% Duty Cycle; 16.0V, 150Adc, 25% Duty Cycle, IP-23.
Max. OCV: 92Vpeak
PART B:
-Model TP 1500 VRD USA (TransPocket 1500 VRD USA), inverter type welding power sources, for DC Rod
Electrode and DC TIG welding processes, rated as follows:
Input: 230V, 30A(max.), 16A(eff.); 1 phase, 50 or 60Hz; Output: 23.2V, 80Adc, 100% Duty Cycle; 24.0V,
100Adc, 60% Duty Cycle; 25.6V, 140Adc, 30% Duty Cycle; 16.0V, 150Adc, 25% Duty Cycle, IP-23.
- WELDING MACHINES - Certified to US Standards
- WELDING MACHINES
DQD 507 Rev. 2009-09-01
Certificate:
2260796
Master Contract:
203213
Project:
2260796
Date Issued:
2010/01/21
Max. OCV: 12Vpeak
PART C:
-Model TP 1500 CC (TransPocket 1500 CC), inverter type welding power sources, for DC Rod Electrode
welding processes, rated as follows:
Input: 230V, 30A(max.), 16A(eff.); 1 phase, 50 or 60Hz; Output: 23.2V, 80Adc, 100% Duty Cycle; 24.0V,
100Adc, 60% Duty Cycle; 25.6V, 140Adc, 30% Duty Cycle, IP-23.
Max. OCV: 92Vpeak
PART D:
-Model TP 1500 RC HD USA (TransPocket 1500 RC HD USA), inverter type welding power sources, for DC
Rod Electrode welding processes, rated as follows:
Input: 230V, 20.4A(max.), 16A(eff.); 1 phase, 50 or 60Hz; Output: 10.0V, 80Adc, 100% Duty Cycle; 10.0V,
150Adc, 25% Duty Cycle, IP-23.
Max. OCV: 47Vpeak
PART E: ACCESSORIES
(a) Remote control units employed in conjunction with power sources (TP 1500): TR1500 (see See
2260796 Att1 Photo 4), TR1500-H (see See 2260796 Att1 Photo 5) and TR1500-F (see See 2260796 Att1 Photo
6)
NOTE:
- The installation of equipment not provided with power plug and cord is subject to Approval of the Local
Inspection Authority.
APPLICABLE REQUIREMENTS
CSA Std C22.2 No. 60 - Arc Welding Equipment
* CAN/CSA E60 974-1 - Arc Welding Equipment – Part 1: Welding power sources
UL Std No. 551 - Transformer-Type Arc-Welding Machines
DQD 507 Rev. 2009-09-01
Loading...