Fronius CSA Certificate Robacta TXW TXG TX 10i G W Standkonsole Wandkonsole TXi TWIN Certificate [EN]

Issued by:

Ramana Tangirala
Ramana Tangirala

Certificate of Compliance

Certificate: 2441170 Master Contract: 203213 (203213)
Project: 70215356 Date Issued: 2019-03-25
Issued to: Fronius International GmbH

Guenter Fronius Strasse 1
Wels-Thalheim, Upper Austria 4600
AUSTRIA

Attention: Josef Feichtinger

The products listed below are eligible to bear the CSA Mark shown

with adjacent indicators 'C' and 'US' for Canada and US or with adjacent

indicator 'US' for US only or without either indicator for Canada only.

PRODUCTS
CLASS - C561103 - WELDING MACHINES
CLASS - C561183 - WELDING MACHINES-Certified to US Standards

Welding Accessory:

Torch changing station for automatic and robotic welding torches, SELV control, with/without coolant.

PART A: Model Standkonsole TXW (Alternate Name “Robacta TXW”), 24Vdc, 1,5A, 6bar (87PSI)
PART B: Model Standkonsole TXG (Alternate Name “Robacta TXG”), 24Vdc, 1,5A, 6bar (87PSI)
PART C: Model Robacta TX 10i/G/W Console, 24Vdc, 1,5A, 6bar (87PSI)
PART D: Model Standkonsole TXi TWIN, 24Vdc, 1,5A, 6bar (87PSI)
PART E: Model Wandkonsole TXi TWIN, 24Vdc, 1,5A, 6bar (87PSI)

Note: The Srtandkonsole TX torch changing stations are not certified for manual operation.

APPLICABLE REQUIREMENTS

CAN/CSA-E60974-1 - Arc Welding Equipment – Part 1: Welding Power Sources
ANSI/IEC 60974-1 - Arc Welding Equipment – Part 1: Welding Power Sources
CAN/CSA C22.2 No. 68* – Motor Operated Appliances (Household and Commercial)
UL STD. No. 73* – Motor Operated Appliances
* used as guide

DQD 507 Rev. 2018-11-12 Page 1