Fronius CSA Certificate Robacta TC 1000 Robacta TC 1000 Twin Robacta TC 1000 ext TC 2000 Robacta TC 2000 Twin Robacta TC 2000 ext Certificate [EN]

Issued by:

Ramana Tangirala
Ramana Tangirala

Certificate of Compliance

Certificate: 1668727 Master Contract: 203213 (203213)
Project: 70215353 Date Issued: 2019-03-19
Issued to: Fronius International GmbH

Guenter Fronius Strasse 1
Wels-Thalheim, Upper Austria 4600
AUSTRIA

Attention: Josef Feichtinger

The products listed below are eligible to bear the CSA Mark shown

with adjacent indicators 'C' and 'US' for Canada and US or with adjacent

indicator 'US' for US only or without either indicator for Canada only.

PRODUCTS
CLASS - C561103 - WELDING MACHINES
CLASS - C561183 - WELDING MACHINES-Certified to US Standards

PART A:
Cleaning station for mechanized automatic and robotic welding torches, Models Robacta TC 1000, Robacta TC

1000 TWIN and Robacta TC 1000 ext; with optional pneumatic wire cutter. Operates from the secondary of a

certified Fronius auto-transformer unit. Rated 230Vac, 3A, single phase, 50-60Hz, 40 second cycle time, 6bar
(87PSI).

PART B:

Autotransformers for use with Models Robacta TC 1000, Robacta TC 1000 TWIN and Robacta TC 1000 ext
cleaning stations, rated output: 230V, 0.8A continuous, 1 ph, 50-60Hz. Model TC 1000 110-230V, rated input
110V, 1.8A, 1ph, 50-60Hz, model TC 1000 400-230V, rated input 400V, 0.71A, 1ph, 50-60Hz and model TC
1000 480-230V, rated input 480V, 0.4A, 1ph, 50-60Hz.

DQD 507 Rev. 2018-11-12 Page 1

Certificate: 1668727
Project: 70215353

Master Contract: 203213

Date Issued: 2019-03-19

PART C:
Model Robacta TC 2000, Robacta TC 2000 Twin, Robacta TC 2000 d35, Robacta TC2000 LH and Robacta
TC 2000 ext. Cleaning station for mechanized automatic and robotic welding torches, with optional pneumatic

wire cutter. Operates from the secondary of a certified Fronius auto-transformer unit. Rated 110Vac, 7A or
230Vac, 4A, single phase, 50-60Hz, 50 second cycle time, 6bar (87PSI).
Note:

-The Models Robacta TC 1000, Robacta TC 1000 TWIN, Robacta TC 1000 ext, Robacta TC 2000, Robacta TC
2000 Twin, Robacta TC 2000 d35, Robacta TC2000 LH and Robacta TC 2000 ext. cleaning stations are not
certified for manual operation and are not certified for cleaning manually operated welding torches.

- The Robacta TC 1000, Robacta TC 1000 TWIN and Robacta TC 1000 ext cleaning stations are certified for use
with the TC 1000 110-230V, 400-230V and 480-230V autotransformers only.

- The Robacta TC 1000, Robacta TC 1000 TWIN, Robacta TC 1000 ext, Robacta TC 2000, Robacta TC 2000
Twin, and Robacta TC 2000 ext. cleaning stations are certified for use with water base non-flammable coolants
specified by Fronius only.

APPLICABLE REQUIREMENTS

CAN/CSA E60974-1 - Arc Welding Equipment – Part 1: Welding Power Sources
ANSI/IEC 60974-1 - Arc Welding Equipment; Part 1: Welding Power Sources

DQD 507 Rev. 2018-11-12 Page 2