Certificate of Compliance
Certificate: Master Contract:
Project:
Issued to: Fronius International GmbH
2607384
Guenter Fronius Strasse 1
Wels-Thalheim, 4600
Austria
Attention: Mr. Josef Feichtinger
Date Issued:
The products listed below are eligible to bear the CSA
Mark shown with adjacent indicators 'C' and 'US' for
Canada and US or with adjacent indicator 'US' for
US only or without either indicator for Canada only.
Ramana Tangirala
Issued by:
Ramana Tangirala, P.Eng.
203213
April 25, 2013
PRODUCTS
CLASS 5611 01
CLASS 5611 83
Welding Equipment Accessory:
Q-Eye is a quality assurance system which visualize the welding process for the user, existing of an Power
supply (Netzteil Q-Eye) and a Camera unit (Kameraeinheit Q-Eye).
Rated 110 - 230Vac, 2A/1A, single phase, 50-60Hz
APPLICABLE REQUIREMENTS
CSA Std C22.2 No. 60 - Arc Welding Equipment
UL 60974-1 - Arc Welding Equipment – Part 1: Welding Power Sources
*ANSI/IEC 60974-1 - Arc Welding Equipment – Part 1: Welding Power Sources
*ANSI/IEC 60974-2 - Arc Welding Equipment – Part 2: Liquid cooling systems
- WELDING MACHINES
- WELDING MACHINES - Certified to US Standards
DQD 507 Rev. 2012-05-22 Page: 1
Certificate: Master Contract:
203213
Project:
2607384
Date Issued:
*UL Std No. 551 - Transformer-Type Arc-Welding Machines
* CAN/CSA C22.2 No. 68 - Motor Operated Appliances (Household and Commercial)
* UL STD. No. 73 - Motor Operated Appliances
* CSA Std C22.2 No.66 - Specialty Transformers
* Used as a guide
April 25, 2013
DQD 507 Rev. 2012-05-22 Page: 2
Loading...