Issued by:
Sven Renke
Sven Renke
Certificate of Compliance
Certificate: 80126338 Master Contract: 203213
Project: 80126338 Date Issued: 12/05/2022
Issued to: Fronius International GmbH
Guenter Fronius Strasse 1
Wels-Thalheim, Upper Austria 4600
Austria
Attention: Josef Feichtinger
The products listed below are eligible to bear the CSA Mark shown with adjacent
indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US
only or without either indicator for Canada only.
PRODUCTS
C561103 WELDING MACHINES - Welding Machines
C561183 WELDING MACHINES - Certified to US Standards
Torches for welding power sources, mod. PCT 200
- Mechanically guided water-cooled torch with I2max 200A
PART A: PCT 200 Model “PCT 200 F++/F/6m”, followed with suffixes, water-cooled torch for plasma processes
Models Maximum Welding Current (I2max) (A)
PCT 200 F++/F/6m 200A
QD 507 Rev 2019-04-30
© 2022 CSA Group. All rights reserved.
Page 1
APPLICABLE REQUIREMENTS
ANSI/IEC 60974-1-2019 - Arc welding equipment — Part 1: Welding power sources
CSA C22.2 NO. 60974-1:19 - Arc welding equipment - Part 1: Welding power sources
CAN/CSA-E60974-7-02 (R2021) - Arc Welding Equipment - Part 7: Torches
ANSI/NEMA/IEC 60974-7-2009 - Arc Welding Equipment Part 7: Torches
Certificate: 80126338
Project: 80126338
Master Contract: 203213
Date Issued: 12/05/2022
QD 507 Rev 2019-04-30
© 2022 CSA Group. All rights reserved.
Page 2
Loading...