DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 1
Certificate of Compliance
Certificate:
70165678
Master Contract:
203213
Project:
80107380
Date Issued:
2021-12-15
Issued To:
Fronius International GmbH
Guenter Fronius Strasse 1
Wels-Thalheim, Upper Austria, 4600
Austria
Attention: Josef Feichtinger
The products listed below are eligible to bear the CSA Mark shown with
adjacent indicators 'C' and 'US' for Canada and US or with adjacent
indicator 'US' for US only or without either indicator for Canada only.
Issued by:
Alessandro Raspatelli
Alessandro Raspatelli
PRODUCTS
CLASS - C561103 - WELDING MACHINES Welding Machines
CLASS - C561183 - WELDING MACHINES Certified to US Standards
PART A:
Model “iWave 230i DC /MV/B” (Alternate name: “TransTig 230iMV/B”, “TT 230i MV/B”) followed by
suffixes, inverter type welding power sources, for TIG and Rod Electrode welding processes, rated as follows:
Input: 230V, 22.8A (max.), 15.3A (eff.) / 120V, 28.9A (max), 19.4A (eff.); 1 phase, 50 or 60Hz;
Output: 230V: 16.8V, 170Adc, 100% Duty cycle; 18.2V, 205Adc, 60% Duty Cyle; 19.2V, 230Adc, 45% Duty
cycle;
120V: 15.2V, 130Adc, 100% Duty cycle; 16.2V, 155Adc, 60% Duty cycle; 16.8V, 170Adc, 45% Duty cycle;
Max. OCV: 97Vpeak
IP-23
Certificate: 70165678
Project: 80107380
Master Contract: 203213
Date Issued: 2021-12-15
DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 2
PART B:
Model “iWave 190i AC/DC /MV/B” (Alternate name: “MagicWave 190 MV/B”, “MW 190 MV/B”)followed
by suffixes, inverter type welding power sources, for TIG and Rod Electrode welding processes, rated as follows:
Input: 230V, 19.2A (max.), 12.4A (eff.) / 120V, 28.2A (max), 16.7A (eff.); 1 phase, 50 or 60Hz;
Output: 230V: 15.6V, 140Adc, 100% Duty cycle; 16.4V, 160Adc, 60% Duty cycle; 17.6V, 190Adc, 35% Duty
cycle; 120V: 14.0V, 100Adc, 100% Duty cycle; 14.8V, 120Adc, 60% Duty cycle; 16.0V, 150Adc, 35% Duty
cycle;
Max. OCV: 100Vpeak; IP-23
PART C:
Model “iWave 230i AC/DC /MV/B” (Alternate name: “MagiWave 230i MV/B”, “MW 230i MV/B”)
followed by suffixes, inverter type welding power sources, for TIG and Rod Electrode welding processes, rated as
follows:
Input: 230V, 25.1A (max.), 14.9A (eff.) / 120V, 30.2A (max), 17.9A (eff.); 1 phase, 50 or 60Hz;
Output: 230V: 16.6V, 165Adc, 100% Duty cycle; 17.8V, 195Adc, 60% Duty cycle; 19.2V, 230Adc, 35% Duty
cycle; 120V: 14.8V, 120Adc, 100% Duty cycle; 15.6V, 140Adc, 60% Duty cycle; 16.8V, 170Adc, 35% Duty
cycle;
Max. OCV: 100Vpeak
IP-23
PART D:
Model “CU 600t MV” Welding accessory, water cooler for cooling welding system components manufactured
by Fronius, using Fronius coolant,
Input: 230V, 1.2A (max.), 1 phase, 50 or 60Hz;
120V, 2.4A (max.), 1 phase, 50 or 60Hz;
Output: 0.6kW at 1.0l/min, 4.2bar max
IP-23
PART E:
Model “CU 600t MV /MC” Welding accessory, water cooler for cooling welding system components
manufactured by Fronius, using Fronius coolant,
Input: 230V, 1.2A (max.), 1 phase, 50 or 60Hz;
120V, 2.4A (max.), 1 phase, 50 or 60Hz;
Output: 0.6kW at 1.0l/min, 4.2bar max
IP-23
PART F: ACCESSORIES for Model “iWave 230i DC /MV/B, iWave 190i AC/DC /MV/B, iWave 230i
AC/DC /MV/B”:
Remote control units employed in conjunction with power source iWave 230i DC /MV/B, iWave 190i AC/DC
/MV/B, iWave 230i AC/DC /MV/B
NOTE:
- The installation of equipment not provided with power plug and cord is subject to Approval of the Local
Inspection Authority.
Loading...