Fronius Cooling Liquid FCL 10 - FCL 20 Safety data sheet [EN]

Page 1/10

Safety data sheet

according to 1907/2006/EC

Printing date 26.04.2022 Revision: 26.04.2022Version number 1.2 (replaces version 1.1)

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

Trade name:

Cooling Liquid FCL 10
Cooling Liquid FCL 20

Article number:

40,0009,0180 / 40,0009,0181 / 40,0009,0196 / 40,0009,0197
40,0009,0182 / 40,0009,0183

1.2 Relevant identified uses of the substance or mixture and uses advised against

Application of the substance / the mixture

1.3 Details of the supplier of the safety data sheet

Manufacturer/Supplier:
Fronius International GmbH

Fronius Straße 5
A-4642 Sattledt
T: [phone]

Further information obtainable from:

[e-mail]
[e-mail]

1.4 Emergency telephone number:

[phone]
Available:
Mo - Th: 08:00 - 16:00 h (CET)
Fr: 08:00 - 12:00 h (CET)

Cooling fluid for corresponding Fronius welding systems

Call the national emergency number!

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008

The product is not classified, according to the GB CLP regulation.

2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008
Hazard pictograms
Signal word

Void

Hazard statements

Void

Void

Void

2.3 Other hazards
Results of PBT and vPvB assessment
PBT:

The mixture does not contain PBT substances ≥ 0,1 %.

vPvB:

The mixture does not contain vPvB substances ≥ 0,1 %.

(Contd. on page 2)

GB

54.0.17

Page 2/10

Safety data sheet

according to 1907/2006/EC

Printing date 26.04.2022 Revision: 26.04.2022Version number 1.2 (replaces version 1.1)

Trade name:

Cooling Liquid FCL 10
Cooling Liquid FCL 20

(Contd. of page 1)

SECTION 3: Composition/information on ingredients

3.2 Mixtures
Description:

Dangerous components:

[% (w/w)]

CAS: 57-55-6
EINECS: 200-338-0
Reg.nr.: 01-2119456809-23-XXXX

Additional information:

SECTION 4: First aid measures

4.1 Description of first aid measures
General information:

Seek medical treatment in case of complaints.
If unconscious, use a stable lateral position and do not administer anything through mouth.

After inhalation:
After skin contact:
After eye contact:

Rinse opened eye for several minutes under running water.
Remove contact lenses, if present and easy to do. Continue rinsing.
Seek medical treatment in case of complaints.

After swallowing:

Rinse out mouth and then drink plenty of water.
Seek medical treatment.

4.2 Most important symptoms and effects, both acute and delayed

No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed

Depending on the condition of the patients, the doctor must assess the symptoms and the overall general
condition.

Mixture of substances listed below with nonhazardous additions.

Propylene glycol
substance with a Community workplace exposure limit

For the wording of the listed hazard phrases refer to section 16.

Supply fresh air; consult doctor in case of complaints.

Generally the product does not irritate the skin.

20 – 40%

SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing agents:

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

For safety reasons unsuitable extinguishing agents:

Water with full jet

5.2 Special hazards arising from the substance or mixture

Formation of toxic gases is possible during heating or in case of fire.

5.3 Advice for firefighters
Protective equipment:

Wear self-contained respiratory protective device.

(Contd. on page 3)

GB

54.0.17

Page 3/10

Safety data sheet

according to 1907/2006/EC

Printing date 26.04.2022 Revision: 26.04.2022Version number 1.2 (replaces version 1.1)

Trade name:

Cooling Liquid FCL 10
Cooling Liquid FCL 20

Wear fully protective suit.

Additional information

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Restricted access to the affected area until cleaning work is completed.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Avoid breathing mist/vapours/spray.

6.2 Environmental precautions:

6.3 Methods and material for containment and cleaning up:

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose of the material collected according to regulations.

6.4 Reference to other sections

See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

Cool endangered receptacles with water spray.

Do not allow to enter sewers/ surface or ground water.

(Contd. of page 2)

SECTION 7: Handling and storage

7.1 Precautions for safe handling

Ensure good ventilation/exhaustion at the workplace.
Keep receptacles tightly sealed.
Avoid contact with skin and eyes.
Avoid breathing mist/vapours/spray.
Use personal protective equipment as required.
Observe protective measures and safety instructions.

Information about fire - and explosion protection:

Keep ignition sources away - Do not smoke.

7.2 Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:

Store in a cool location.
Store receptacle in a well ventilated area.
Store in dry conditions.
Store in accordance with local/regional/national/international regulations.

Information about storage in one common storage facility:

Store away from oxidising agents.

Further information about storage conditions:

Keep container tightly sealed.
Store in original container.

Recommended storage temperature:
Storage class:

10

room temperature

(Contd. on page 4)

GB

54.0.17