Page 1/13
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/26/2022 Reviewed on 04/26/2022
1 Identification
Product identifier
Trade name:
Article number:
Application of the substance / the mixture
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Fronius International GmbH
Fronius Straße 5
A-4642 Sattledt
T: +43 7242 241 0
Information department:
welding.techsupport@fronius.com
msds.techsupport@fronius.com
Emergency telephone number:
+43 7242 241 0
Available:
Mo - Th: 08:00 - 16:00 h (CET)
Fr: 08:00 - 12:00 h (CET)
Please contact your regional poison center or emergency call!
Cleaning/Polishing red
42,0510,0380
Auxiliary for electrolytic cleaning and polishing.
2 Hazard(s) identification
Classification of the substance or mixture
Corrosive to Metals 1 H290 May be corrosive to metals.
Acute Toxicity - Oral 4 H302 Harmful if swallowed.
Skin Corrosion 1B H314 Causes severe skin burns and eye damage.
Eye Damage 1 H318 Causes serious eye damage.
Additional information:
Label elements
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS05
Signal word
GHS07
Danger
For the wording of the hazard categories, see section 16.
(Contd. on page 2)
US
54.0.17
Page 2/13
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/26/2022 Reviewed on 04/26/2022
Trade name:
Hazard-determining components of labeling:
phosphoric acid
Hazard statements
May be corrosive to metals.
Harmful if swallowed.
Causes severe skin burns and eye damage.
Precautionary statements
Do not breathe dusts or mists.
Wear protective gloves/protective clothing/eye protection/face protection.
If swallowed: Call a poison center/doctor if you feel unwell.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
Immediately call a poison center/doctor.
Specific treatment (see on this label).
Wash contaminated clothing before reuse.
Store locked up.
Store in corrosive resistant container with a resistant inner liner.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 - 4)
Cleaning/Polishing red
(Contd. of page 1)
Health = 3
0
3
HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
Other hazards
Results of PBT and vPvB assessment
PBT:
vPvB:
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:
0
The mixture does not contain PBT substances ≥ 0,1 %.
The mixture does not contain vPvB substances ≥ 0,1 %.
Fire = 0
Reactivity = 0
3
Health = 3
Fire = 0
0
Reactivity = 0
0
Mixture of the substances listed below with nonhazardous additions.
(Contd. on page 3)
US
54.0.17
Page 3/13
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/26/2022 Reviewed on 04/26/2022
Trade name:
Cleaning/Polishing red
(Contd. of page 2)
Dangerous components:
[% (w/w)]
CAS: 7664-38-2 phosphoric acid
Skin Corrosion 1B, H314
Acute Toxicity - Oral 4, H302
80 - < 90%
Specific concentration limits: Skin Corr. 1B; H314: C ≥ 25 %
Skin Irrit. 2; H315: 10 % ≤ C < 25 %
Eye Dam. 1; H318: C ≥ 25 %
Eye Irrit. 2; H319: 10 % ≤ C < 25 %
Met. Corr.1; H290: C ≥ 20 %
4 First-aid measures
Description of first aid measures
General information:
Seek medical treatment in case of complaints.
If unconscious, use a stable lateral position and do not administer anything through mouth.
Immediately remove any clothing soiled by the product.
After inhalation:
Supply fresh air or oxygen; call for doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:
Immediately wash with water and soap and rinse thoroughly.
Take off immediately all contaminated clothing and wash it before reuse.
Call a doctor immediately.
After eye contact:
Rinse opened eye for several minutes under running water.
Remove contact lenses, if present and easy to do. Continue rinsing.
Consult an ophthalmologist or eye clinic immediately.
After swallowing:
Rinse out mouth and then drink plenty of water.
Do NOT induce vomiting.
Immediately call a doctor.
Most important symptoms and effects, both acute and delayed
Acute: corrosive effect on skin, mucous membranes and eyes.
Risk of irreversible damage to eyes.
If swallowed, it has a strong corrosive effect on the mouth and throat and may perforate the oesophagus
and stomach.
Harmful if swallowed.
Indication of any immediate medical attention and special treatment needed
Depending on the condition of the patients, the doctor must assess the symptoms and the overall general
condition.
(Contd. on page 4)
US
54.0.17
Page 4/13
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/26/2022 Reviewed on 04/26/2022
Trade name:
Cleaning/Polishing red
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.
Additional information
Collect contaminated fire fighting water separately. It must not enter the sewage system.
6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Restricted access to the affected area until cleaning work is completed.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Do not breathe vapour/spray.
Environmental precautions:
Do not allow to enter sewers/ surface or ground water.
Inform respective authorities in case of seepage into water course or sewage system.
Methods and material for containment and cleaning up:
Use neutralizing agent.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Protective Action Criteria for Chemicals
(Contd. of page 3)
PAC-1:
CAS: 7664-38-2 phosphoric acid 3 mg/m³
PAC-2:
CAS: 7664-38-2 phosphoric acid 30 mg/m³
PAC-3:
CAS: 7664-38-2 phosphoric acid 150 mg/m³
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
(Contd. on page 5)
US
54.0.17
Loading...