
/ Perfect Welding / Solar Energy / Perfect Charging
CHECKLIST - BACKUP POWER
Once installation, conguration, and commissioning have been successfully completed, this checklist must be worked through to ensure the backup power changeover function and backup power mode are operating correctly.
TASK TEST CONFIRMATION
The inverter, battery, and all other necessary components have been installed and assembled correctly.
The backup power changeover unit has been installed
and commissioned in accordance with the country-specic installation guidelines and as outlined in the documentation.
The software settings have been carried out in accor-
dance with the „Backup power conguration“ chapter in
the documentation.
A warning notice has been put on the switch cabinet to
warn that a backup power supply has been installed.
Start the inverter in grid power feed operation. Check whether the inverter starts in grid power feed
Disconnect the PV system from the public grid. This
can be eected using a disconnecting device in the
upstream AC path or the disconnecting devices (e.g. NH
fuse) of the building connection. The disconnection must
occur before the Smart Meter (grid side).
Measure the voltage/frequency in the established standalone operation.
Reconnect the PV system to the public grid. The time taken from the end of stand-alone operation
operation and a power shift takes place. (Test duration
6 minutes).
Check whether the inverter starts in stand-alone operation. The changeover can take more than 1 minute.
Set value: 230 V / ± 10 % / 53 Hz
USA: 120 V / ± 10 % / 63 Hz
until the subsequent connection of the contactors in
the backup power changeover unit must be at least 10
seconds. The changeover can take more than 1 minute.
Only then may the inverter resume grid power feed
operation. This must be checked by the inverter (test
duration 6 minutes).
I hereby conrm that the backup power changeover function and backup power mode are operating correctly.
Place, date
42,0426,0365,EA 001-12022020
FRONIUS INTERNATIONAL GMBH www.fronius.com
Signature