ASSIGNING AN ACCOUNT TO AN
EXISTING SYSTEM ON SOLAR.WEB
Quick guide
Quick guide
© Fronius Australia Pty Ltd., VH
Version 1.0/2016
Fronius reserves all rights, in particular rights of reproduction, distribution and translation.
No part of this work may be reproduced in any way without the written consent of Fronius. It must not be saved, edited,
reproduced or distributed using any electrical or electronic system.
You are hereby reminded that the information published in this document, despite exercising the greatest of care in its
preparation, is subject to change and that neither the author nor Fronius can accept any legal liability
Gender-specific wording refers equally to female and male form.
(c) Fronius Australia Pty. Ltd, 2016 1/6
SYSTEMS AND ACCOUNTS ON SOLAR.WEB
A system in Solar.web can have an undefined number of accounts assigned to it. In order to have access to a
system and its monitoring features, each Solar.web account has to be added in the permission part of the
system. Accounts can be added with either supervisor or guest rights. Accounts with supervisor rights will be
able to add further accounts to the system.
Once an account is added to a system it will appear in the ‘My PV system’ list of the corresponding system
account. This is the list/page that opens after logging in:
My PV system page – start page after login
In order to setup monitoring for a customer or to give a company access to a system for monitoring and
maintenance purpose, their accounts have to be added to the system after the commissioning process of the
DataManager Card 2 (see Setting-up monitoring via smart device quick guide)
Only an existing Solar.web account can be added to a system. If the person who should be added to the system
has not got an account on Solar.web, a new account has to be registered on Solar.web before it can be added
to the system.
(c) Fronius Australia Pty. Ltd, 2016 2/6
Register a new account on Solar.web
A new account can be registered by accessing the Solar.web website via www.solarweb.com and selecting
‘Register’ in the ‘Login’ field on the top right:
Click on ‘Register now’
www.solarweb.com – start page
You will need the username once the registration process is complete in order to assign the account access to
a Solar.web system. The username is always an email address.
An activation email is sent to the registered email address and must be activated before an account can be
assigned to a Solar.web system.
(c) Fronius Australia Pty. Ltd, 2016 3/6
2. Go to tab ‘Settings’
Adding an account to a system
Login into your Solar.web account and select the system to which you want to add the (new) account/person. In
this example we chose the system of our Australian subsidiary: ‘Fronius AUS Melbourne’
Go to the tab ‘Settings’
1. Select system
(c) Fronius Australia Pty. Ltd, 2016 4/6
3. Go to field ‘Permissions’
4. Click on ‘Add’
Go to the field ‘Permissions’.
Click on ‘Add’
(c) Fronius Australia Pty. Ltd, 2016 5/6
5. Add username and select
‘user rights’
guest or supervisor
Add the account username you wish to assign to the Solar.web system, select the user rights access limit and
save your changes.
6. Select User rights,
7. Click ‘OK’
The Solar.web account you have granted permission to view the system will now be able to log in to
www.solarweb.com or the Solar.web App to view their system data ((in this example for the system ‘Fronius
AUS Melbourne’).
(c) Fronius Australia Pty. Ltd, 2016 6/6
Loading...