Page 1
/ Perfect Welding / Solar Energy / Perfect Charging
ACCUPOCKET 150/400 TIG
Quick reference
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided
in hard copy and online.
WELDING SETTINGS
Setting values:
Arc-force dynamic: 0 - 100 | factory setting = 20
Welding current: 10 - 140 A (STICK), 3 - 150 A (TIG)
SoftStart / HotStart function: 0 - 200% | factory setting = 130%
TIG pulsing: OFF / 0.5 - 10 Hz Factory setting = OFF
Available welding processes:
MMA welding
MMA welding with Cel electrode
TIG welding
Reserved for special programs
42,0426,0247,EN 002-08082017
/ Perfect Welding / Solar Energy / Perfect Charging
ACCUPOCKET 150/400 TIG
Quick reference
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided
in hard copy and online.
WELDING SETTINGS
Setting values:
Arc-force dynamic: 0 - 100 | factory setting = 20
Welding current: 10 - 140 A (STICK), 3 - 150 A (TIG)
Available welding processes:
42,0426,0247,EN 002-08082017
SoftStart / HotStart function: 0 - 200% | factory setting = 130%
TIG pulsing: OFF / 0.5 - 10 Hz Factory setting = OFF
MMA welding
MMA welding with Cel electrode
TIG welding
Reserved for special programs
Page 2
ACCESSING THE SETUP MENU
Setup menu - MMA welding Setup menu - Cel electrodes Setup menu - TIG
CHANGING WELDING PARAMETERS
Turn and press the adjusting dial to select and change parameters.
PARAMETERS FOR MMA WELDING
Starting current duration: 0.1 - 1.5 seconds |
0.5 seconds*
Anti-stick: On*/OFF
Break voltage: 25 - 80 V | 45 V*
Software version
Automatic switch-o: 300 - 900* seconds / OFF
Factory setting
* factory setting
ACCESSING THE SETUP MENU
PARAMETERS FOR TIG WELDING
Mode: OFF/2-step*/4-step
Starting current: 1 - 200% | 50%*
Reduced current: 1 - 200% | 50%*
Final current: 1 - 100% | 50%*
Gas post-ow time: 0.2 - 9.9* seconds
Comfort Stop sensitivity: 0.3 - 2.0 V / OFF*
Break voltage: 12 - 35 volts | 15 volts*
Tacking function: OFF* / 0.1 - 5.0 seconds
Software version
Automatic switch-o: 300 - 900* seconds / OFF
Factory setting
Setup menu - MMA welding Setup menu - Cel electrodes Setup menu - TIG
CHANGING WELDING PARAMETERS
Turn and press the adjusting dial to select and change parameters.
PARAMETERS FOR MMA WELDING
Starting current duration: 0.1 - 1.5 seconds |
0.5 seconds*
Anti-stick: On*/OFF
Break voltage: 25 - 80 V | 45 V*
Software version
Automatic switch-o: 300 - 900* seconds / OFF
Factory setting
* factory setting
PARAMETERS FOR TIG WELDING
Mode: OFF/2-step*/4-step
Starting current: 1 - 200% | 50%*
Reduced current: 1 - 200% | 50%*
Final current: 1 - 100% | 50%*
Gas post-ow time: 0.2 - 9.9* seconds
Comfort Stop sensitivity: 0.3 - 2.0 V / OFF*
Break voltage: 12 - 35 volts | 15 volts*
Tacking function: OFF* / 0.1 - 5.0 seconds
Software version
Automatic switch-o: 300 - 900* seconds / OFF
Factory setting
Loading...