V. Clean and maintenance
1. To keep food hygiene, please clean the components that touched
single head / double head
foods after each use.
2. Please store in aeration-drying place for long time unused.
VI. Fault handling
1. The machine does not rotate:
A. Check whether the plug or socket in good contact or not.
B. Check whether the switch work well or not.
C. May be a long time to start the automatic motor protection device,
wait for the temperature of the motor to return to normal, you can use
normally.
2. Too noisy in the machine rotating:
A. Check whether the milk shake cup installs well or not. Please
reinstall if necessary.
B. Check whether the stirring shaft bent or not. Please contact our
professional personnel or the dealers we approved if necessary.
3. The machine electrifies:
Must pull the plug immediately and ask professional personnel
milkshake machine
Thank you for buying the milk shake machine. Please read the
instruction carefully before use. Please safekeep it in case of need.
The product may improve without prior notice.
operating instruction
handle.
VII. Technical parameters
Type single-end
Power 180W
Voltage 220V/110V
Frequency 50HZ
Speed 18000RMP
Type double-end
Power 180W+180W
Voltage 220V/110V
Frequency 50HZ
Speed 18000RMP
single-end double-end
II. Installation Instruction
1. Take the machine out and put on the working table after open the
Motor shell
★
The machine applies the safety device. Only
the machine plugs in and the milk shake cup
installs properly, the machine can work.
★
Corrective installation method of the milk
shake machine:
Put the milk shake cup on the cup holder and
let the cup rabbet touch the micro switch.
I. Components
Motor shell
stirring shaft
stirring shaft
milk shake cup
box. 60-80 cm is usually best for the height of the table.
2. This machine needs to use the earth only with the insurance
special socket, and the grounding resistance is not more than 0.1 Ω.
III. How to use
1. The machine applies the safety device. Only the machine plugs in
and the milk shake cup installs properly, the machine can work.
2. Pour the beverage into the milkshake glass. The milkshake should
not fill up (at least 2/3 of the milkshake)
3. Choose proper speed in terms of demands.(Low or high speed).
IV. Attention
1. Must pull the plug when clean, maintain or move the machine.
2. Do not touch switch or plug with wet hand.
3. Do not let water flow in switch. Do not use water to flush the
machine directly. Do not immerse the machine in water in case of
electric shock.
milk shake cup
micro switch
mat
single-end
cup holder
machine body
pedestal
mat
double-end
micro switch
machine body
pedestal
4. Please stop use immediately and ask for professional maintenance
personnel.
5. Do not touch rotating part with hand when the machine is
working.
6. Do not let under age approach the machine.
7. The machine cannot continuously work for 5 minutes. Shall use 5
minutes then stop over 2 minutes for long time use.
8. Do not stir hard object with stirring shaft. Do not overstrain in
crosswise in case of bending of shaft. Please contact with the local
dealers if the machine excessively vibrates.
Loading...