Fromm FSW30 Operation Manual

FSW30 Pallet Wrapping Machine

OPERATION MANUAL

Machine Semi-Automatic Pallet Wrapping Machine
Model FSW30
Date

A

pril 2018

Issue FPA002

FSW30 Semi-Automatic Pallet Wrapping Machine Operation Manual | FPA002 | April 2018 | Page 1

CONTENTS

1. General Information 2

1.1 Note of Installation 2

1.2 Notice of Operation 2

2. Specification 3

2.1 Specification Table 3

2.2 Machine Dimensions 4

2.3 Machine Description 5

3. Operation 6

3.1 Operation of Control Panel 6

3.2 Carriage Unit 8

4. Electrical 8

4.1 Electrical Capacity 8

5. Suggested Maintenance and Trouble Shooting 10

5.1 Suggested Maintenance 10

5.2 Warranty Periods 10

5.3 Fromm Service Solutions 10

5.4 Possible troubleshooting causes and remedies 11

6. Contact Fromm Packaging 12

FSW30 Semi-Automatic Pallet Wrapping Machine Operation Manual | FPA002 | April 2018 | Page 2

1. GENERAL INFORMATION

Congratulations on the purchase of your Fromm Semi-Automatic Pallet Wrapping Machine.

We trust you will have many years of packaging efficiency.

Before proceeding with the operation or installation of your new machine please read this
manual thoroughly and gain a full understanding of the requirements, features and operation of
your new machine.

1.1 Note of Installation

To make sure a safe and correct operation, please check below conditions before install the

machine:

1. Power source capacity must be equal of the machine need.

2. Machine standard power is 240V (+- 10%).

3. Machine standard power Hertz is 50Hz. (+- 2%).

4. Machine is workable under the temperature between O - 45.

5. Make sure the wire is tidy on the ground.

6. There should not be any vibration beside the machine, make sure the ground is flat.

1.2 Notice of Operation

To have good protection for the operator, please make sure the following conditions:

1. Before operating, please read the machine operational manual carefully.

2. Make sure there is no object put on the power cable.

3. Make sure there is no object put on the upper elevator unit.

4. Avoid any damp object or water around the electric parts.

5. Avoid film winded underneath the turntable.

6. Do not stand on or across the machine during operation.

7. When problem occurs, please read section 5, Suggested Maintenance and Trouble

Shooting.

FSW30 Semi-Automatic Pallet Wrapping Machine Operation Manual | FPA002 | April 2018 | Page 3

2. SPECIFICATION

2.1 Specification Table

Model FSW-30

Turntable Speed 3 ~ 12 RPM

Turntable dia. 1650mm

Max wrapping height 2200mm

Pallet size 1050x1050mm

Max loading weight 2000kgs

Film stretch (%)

200% & 250% two step change by handle

(300% and 230% option)

Film tension Adjustable – 3 STAGES SETTING

Carriage Unit speed 1.5 ~ 5m/min

Max. film spec.

∮250x500mm

Turntable height 71mm

Machine size 2458x1500x2559mm.

Options:

 1.80 meters dia. Turntable.

 2.6 & 3.0 meters wrapping height

 Top pressure plate driven by motor

 Ramp

 Mechanical roping