Fromm FSW10 Operation Manual

FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 1

FSW10 Pallet Wrapping Machine

OPERATION MANUAL

Machine Semi-Automatic Pallet Wrapping Machine
Model FSW10
Date September 2017
Issue FPA001

FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 1

CONTENTS

1. General Information 2

1.1 Note of Installation 2

1.2 Notice of Operation 2

2. Specification 3

2.1 Specification Table 3

2.2 Machine Dimensions 4

2.3 Machine Description 5

3. Operation 6

3.1 Operation of Control Panel 6

3.2 Control button explanation 7

3.3 How to run a Wrapping Cycle 9

3.4 Illustration for Film Threading 10

3.5 Stretch tension adjust knob 10

3.6 Film quick release description 11

4. Electrical 11

4.1 Electrical Capacity 11

5. Suggested Maintenance and Trouble Shooting 12

5.1 Suggested Maintenance 12

5.2 Warranty Periods 12

5.3 Fromm Service Solutions 12

5.4 Possible Troubleshooting Causes and Remedies 13

6. Contact Fromm Packaging 14

FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 2

1. GENERAL INFORMATION

Congratulations on the purchase of your Fromm Semi-Automatic Pallet Wrapping Machine.

We trust you will have many years of packaging efficiency.

Before proceeding with the operation or installation of your new machine please read this
manual thoroughly and gain a full understanding of the requirements, features and
operation of your new machine.

1.1 Note of Installation

To make sure a safe and correct operation, please check below conditions before install the

machine:

1. Power source capacity must be equal of the machine need.

2. Machine standard power is 240V (+- 10%).

3. Machine standard power Hertz is 50Hz. (+- 2%).

4. Machine is workable under the temperature between 0 - 45.

5. Make sure the wire is tidy on the ground.

6. There should not be any vibration beside the machine, make sure the ground is flat.

1.2 Notice of Operation

To have good protection for the operator, please make sure the following conditions:

1. Before operating, please read the machine operational manual carefully.

2. Make sure there is no object put on the power cable.

3. Make sure there is no object put on the upper elevator unit.

4. Avoid any damp object or water around the electric parts.

5. Avoid film winded underneath the turntable.

6. Do not stand on or across the machine during operation.

7. When problem occurs, please read section - Suggested Maintenance and Trouble

Shooting.

FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 3

2. SPECIFICATION

2.1 Specification Table

Model FSW-10

Turntable Speed 10 RPM

Turntable diameter 1500mm

Max wrapping height 2200mm

Pallet size 1050x1050mm

Max loading weight 1200kgs

Film stretch (%) Infinite / manual adjust

Max. film spec.

∮250x500mm

Turntable height 76mm

Ramp (slope) spec. 1165x1000m

Machine size 2300x1500x2346mm.

Machine net weight 335kg

Options:

 1.65m turntable diameter (max loading weight 1650kg).

 2.6m and 3m wrapping height.

 Ramp.

FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 4

2.2 Machine Dimensions