FRITSCH PULVERISETTE 2519 User Manual

Supplementary

Operating Manual

for

Cutting mill comb ination

comprising of

Universal cutting mill

"pulverisette 19"

Power cutting mill

"pulverisette 25"

Sample splitter

Suction unit

Fritsch GmbH
Manufacturers of Laboratory Instruments
Industriestrasse 8
D - 55743 Idar-Oberstein

Phone: *6784/ 70-0
Fax: *6784/ 70-11
E-Mail:
Internet:

[e-mail]
http://www.fritsch.de

Fritsch GmbH, Laborgerätebau has been certificated by the TÜV­Zertifizierungsgemeinschaft e.V. on June 24, 1994.

An audit certificated the accordance of the Fritsch GmbH to the DIN EN
ISO 9001.

The enclosed declaration of conformity calls the directives which the
Cutting mill combination corresponds to. This permitts us to mark the
instrument with the CE-Sign.

Instrument number 19.5030.00
applies as of serial number 105

Edition 02/2004 Index 001

Table of contents
Page

1 Short description of machine function..................................

1.1 Pre-grinder p-25 model 2 ..................................................................... 1

1.2 Sample splitter......................................................................................1

1.3 Fine crusher p-19 .................................................................................2

1.4 Suction unit...........................................................................................2

1

2 Operational safety....................................................................2

3 Installation................................................................................

3.1 Mounting rack assembly.......................................................................3

3.2 Feed funnel assembly for p-25.............................................................3

3.3 Extension tube assembly for p-19........................................................3

3.4 Sample splitter assembly for p-25........................................................ 3

3.5 Suction adapter assembly for p-19.......................................................4

3.6 Suction unit assembly...........................................................................4

3.7 Power connection.................................................................................4

3.8 Switching on for the first time ...............................................................4

3

4 Working with the Cutting Mill Combination...........................5

4.1 Setting up the sample splitter...............................................................5

5 Cleaning....................................................................................6

5.1 Cleaning the sample splitter................................................................. 6

Edition 02/2004 Index 001