Frisco XXL DOG CRATE Instruction Manual
FOR SAFETY, REMOVE LEASH AND COLLAR
BEFORE YOUR PET ENTERS THE CRATE.
XXL DOG CRATE
INSTRUCTION MANUAL
Available exclusively at
1-800-672-4399
Side Panels (2x)
PARTS INCLUDED
Prior to assembling your pup’s new “castle”, we recommend watching a helpful instruction video.
Visit chewy.com, search sku #97489.
(largest panels)
Has loops along both ends. One panel has a hinged door.
Front Door Panel (1x)
Small panel with hinged door.
Floor Panel (1x)
Has tall upright bent hooks and
a pan locking latch on one end.
Top Panel (1x)
Same size as floor panel with two
horseshoe tabs on both ends.
Same size as front door panel, without a door.
DOG CRATE ASSEMBLY INSTRUCTIONS
This “castle” requires two people for assembly.
1
Pan Locking Latch
STEP 1 Identify and locate each of the components listed above.
Remove the four corner rods from the front and back panels.
Place the floor panel flat on the floor with the hooks extending
upward. Locate the pan locking latch on one end of the floor panel
– this is the front of the crate. It’ll be your point of reference.
Corner Rods (4x)
Remove the four corner rods
from the front and back panels.
2a
CLOSELY SPACED
HORIZONTAL WIRES
3
2
SIDE PANEL
HOOK PLACEMENT
FLOOR
PANEL
Plastic Pan (1x)Back Panel (1x)
2b
STEP 2 (a) Locate the side panel without the door and lay it on
the floor along the left side of the floor panel. The loops should be
facing up. The closely spaced horizontal wires should be closest
to the floor panel. (b) Place the floor panel hooks between the
second and third horizontal wires and inside the first vertical wires
of the side panel.
3
STEP 3 Slightly lift the side panel, making sure the floor panel
hooks go over and wrap around the second horizontal wire.
Continue lifting until the side panel is vertical.
4
STEP 4 Locate the back panel and place it at the back of
the floor panel and alongside the vertical side panel. The two
u-shaped hooks should be on top and facing inward. Align the
uppermost loop of the back panel to rest on the uppermost loop
of the side panel. Insert the corner rod downward through all of
the intersecting loops of this corner.
Available exclusively at
1-800-672-4399
CORNER ROD
BACK
PANEL
FLOOR
PANEL
Loading...