fring is a native mobile VoIP application that allows you to make mobile calls and
send instant messages at no extra cost. fring calls are free
WiFi and 3G handset mobile internet connection.
Once you've installed fring, fring's main screen displays your contacts and their
presence status (e.g. online, offline). Th is list shows the names of your fringsterfriends, your Skype/Google-Talk/MSN/ICQ/Yahoo/AIM contacts and, optionally,
the contacts from your handset.
[1]
, leveraging your
fring
From the main contact list you can navigate between your contacts, find their
presence status and initiate a communication session with them. You may
initiate a voice call, start a chat session and move between all open sessions
using your right and left arrows. You can also make SkypeOut calls directly from
your fring contact list.
To sum it up, you'll not only make your phone more useful, you can also save money.
This guide will help you get started.
1
At no additional cost over your subscription data plan.
1 Page
System Requirements
Hardware requirements
In order to use our Beta version, you will need:
• A Windows Mobile 5 or 6 handset (Full list of supported devices) and
• Internet WiFi, GPRS, EDGE or 3G data connection (Not a WAP connection)
on your mobile handset.
Notes:
To initiate a call to a landline (or non-Skype user) using fring, make sure to purchase
SkypeOut/SIP credits.
For internet WiFi and GPRS/EDGE/3G data rates, contact your mobile service provider or
browse our community forum at http://www.fring.com/forums
2 Page
Installation Guide
Downloading and Installing fring
fring can be downloaded into your mobile handset in the following ways:
¾ From the fring website at
¾ Via an SMS invitation sent to your handset from a friend.
¾ Via the fring WAP site at wap.fring.com
http://www.fring.com/download
Downloading fring
¾ To download fring from the web:
http://www.fring.com in your browser.
Open
The following screen opens.
Figure 1 - fring Homepage
Click the download fring to your mobile link (in the green box).
3 Page
A screen with the following form opens:
Figure 2 - fring Download from the Web
1. In the Handset type field, select the type of mobile handset that you
have.
2. In the Your country field, select your
country.
3. In the Mobile number field, type in the
phone number of your handset.
Your phone isn't
supported?
Sign up to be notified
when it is!
Note: Enter your area code and phone
number without any spaces. Type it
carefully - your international number is
your fring user-id.
4. In the Emailaddress field, type in your
email address.
5. Click join!
The confirmation screen opens and an SMS
is sent to your handset.
Once you have received the SMS, the installation
and setup process continues on your handset.
4 Page
On your handset: Open the Text message (see
link (see
Figure 2).
Figure 1 - Inbox
Figure 1) and click the download
Figure 2 - Text Message
fring is downloaded to your device and the installation begins automatically.
Installing fring
Once fring has downloaded, the following screen appears:
Figure 3 – End User License Agreement (EULA)
5 Page
Before you can begin working with fring, read and accept the EULA.
¾ To read and accept the EULA:
1. Scroll through the EULA.
2. Once you have read the EULA and agreed to the terms, press OK.
3. The full EULA is available on our website at
The installation process continues and the following screen appears:
www.fring.com/license.htm
Figure 4 - Installation
Once the installation is complete, you are ready to begin the registration process.
6 Page
fring Registration
Before using fring you are asked to choose a nickname and a password. In
addition, you are provided with the option to add additional VoIP services (e.g.,
Skype, Google Talk, MSN).
Choosing a nickname and password
The following screen opens and you are ready to begin the registration process.
Figure 5 – Registration
The registration screen allows you to select your nickname and the password you
will use to access your fring account. Your fring nickname will help your friends
find you easily. A password is required to secure your account and to protect your
fring contact list.
Note: If you download fring via SMS, the user-id used to identify your account is
the international phone number of your handset. It cannot be changed. Your
friends can search for you and contact you using this number.
If you have installed fring using the EXE (or cab) file, you should have an opt ion
to choose a unique User ID.
¾ To select your nickname:
1. Use the keys on your handset to type the nickname you want to use.
2. Use the down arrow on your handset to navigate to the next field.
¾ To select your password:
1. Use the keys on your handset to type the password you want to use.
Note: Passwords must be at least 4 characters.
2. Press Registration in the bottom left of the screen. The next screen
allows you to add your VoIP (e.g., Skype) account details.
7 Page
Adding Your Add-Ons – (optional)
Once you have chosen your fring nickname and password, provide the details of
your Add-Ons (e.g., Skype) so that you can begin making and receiving VoIP
calls.
Note: You can add one or more Add-Ons (e.g., Skype) to which you are
registered. Make sure to have your username and password for each.
If you do not already have a service account, register on the Web before you
begin to add networks. You can add an Add-On at any time. See
Signing In to
in this guide. To add an Add-On now, follow the instruct ions below.
Adding or
Figure 6 – Add-Ons
¾ To configure your Add-Ons:
1. Check the box of the Add-On you would like to use.
8 Page
The following screen opens:
Figure 7 – Add-On User ID and Password
2. Type in your User Id and Password and press Ok.
fring signs you in to the Add-On and the Add-Ons screen appears so you
can add an additional service.
Note: Once you have chosen and configured an Add-On, a check appears
on the Add-On Icon. You may configure as many Add-Ons as you like.
Your contacts from the Add-Ons you added are added to your fring contact list.
Figure 8 – Contact List
You have successfully completed the registration and added the Add-Ons
you chose. You are now ready to make your first call.
9 Page
Adding a SIP Service – (optional)
If you have an account with a SIP provider, you can also use it on fring.
¾ To add a SIP service:
1. From fring's main screen press MenuÆGo ToÆAdd-ons
2. Choose SIP from the list
The following screen appears:
Figure 11 – Select SIP Service
3. Choose your SIP provider from the list. If your SIP provider is not listed,
choose Other.
The following screen appears:
Figure 9 – SIP Service Setup
4. Enter your SIP User ID, Password and Proxy address and press Ok.
10 Page
Note: For most services, there is both a SIP number and a user name.
Please enter your SIP number here and not your user name.
The format should be 123456@sipprovider.com
You are logged into your SIP Service and should now be able to make
outgoing calls through your SIP provider.
Making a SIP Call
Figure 13 - Call Options Menu
¾ To make a SIP call:
1. Choose a contact in your address book and press Menu.
2. From the Call submenu, choose SIP call.
Your call is made using the SIP you have added.
Note: Currently, you can only add one SIP account to fring.
Making your first fring call
Once you have completed the installation and registration processes described
above, you're ready to make your first call. To know that everything is working
correctly, you may choose to call the fring
The fring test call is a test center that lets you record a message and plays it
back to you. If you hear both the message at the test call and the message that
you have recorded, you're ready to go!
¾ To call the fring test call:
test call.
1. From your contact list choose the fring test call
and press call.
The call connects to the test center.
2. Listen to the message and follow the instructions.
Your testing is complete!
11 Page
Using fring
Getting Started
Import of contacts (Automatic)
After the installation process, fring imports your phone contacts. This enables you
to make all your calls from fring, without going back to your address book.
Note: Calls to contacts who do not have fring are regular cellular calls. Calling
through fring does not change the call in any way.
Opening fring
If you have installed and registered fring, the shortcut will appear in your
handset's main menu.
¾ To open fring:
Press Start, locate the fring shortcut and press it.
fring loads and you are logged into the system. Once you are logged in, fring is
ready for use.
Your fring contact list
Figure 14 – Contact list
12 Page
Statuses
The following statuses are displayed in the contact list:
On a call
Available / Online
Away
Busy
Offline
Call quality
The call quality icon appears at the far right of each fring contact who is currently
online. It describes the expected call quality between two parties who are
connected to fring, based on the connections the parties have (e.g., 3G, GPRS).
Note: this icon appears only when your contact is a member of fring.
The Menu
Figure 10 - Options Menu
To open the Options menu, press your right soft key.
The following options are available:
13 Page
Option
Call Make a call. Once you select this option, the available
Chat Chat with your selected contact. See the 'Chatting'
Send file Send a file from your handset to the selected contact
Add new buddy Add fring users / Send an SMS invitation to a friend,
Remove buddy Remove a fring contact from your fring contact list. See
Change connection Change the active fring connection – for advanced
Description
methods of calling this contact (e.g., fring, SkypeOut) are
displayed in the submenu. If the contact is a regular
mobile contact, the call is made using your cellular plan.
See the '
section in this guide.
(currently only works with frin g, Skype, Yahoo and MSN)
inviting him or her to join fring. See the 'Error! Reference source not found.' section in this guide.
the '
connection settings go to Menu Æ Settings Æ Connection manager.
Making a Call' section in this guide.
Removing a contact' section in this guide.
Settings The following four settings are available:
1. Connection manager - lets you choose the
desired connection.
2. Privacy settings - See the 'Privacy settings'
section in this guide.
3. Show/Hide phone contacts – allows you to
choose whether or not to display the contacts from
your handset in your fring contact list.
4. Disable/Enable autostart – allows you to
choose whether you'd like fring to open when you
start your handset.
5. Disable/Enableearpiece – for some devices,
calls can be routed to the earpiece.
6. Choose language - Change fring's language from
the available languages in the list.
7. Joystick-in settings – allows you to choose the
joystick button function.
8. Show my User-ID - Shows your fring user ID
Go to A shortcut to your open tabs
Lock keypad Lock your phone's keypad. Press the * key to lock the
keypad. To unlock the keypad, press Unlock and then
press the Unlock button or press *.
About Information about fring, including the version number
and contact information.
Exit Exit fring
14 Page
Signing In and Signing Out
When you open fring, you are automatically signed in to fring and your other
Add-Ons.
¾ To sign out of fring:
1. Press Menu.
2. Select the Exit option.
You are signed out of fring.
Making a Call
fring lets you make all of your calls directly from the fring main screen by
importing all of your contacts.
Friends who do not yet have fring can be invited to join. See the Error!
Reference source not found. section in this guide.
Searching your contact list
You can browse your contact list to find contacts quickly.
¾ To find a contact:
Start typing the name of your contact.
Figure 11 – Filtered contact list
Your contact list is filtered according to the characters you have typed.
Note: fring displays the contacts that you have already added to your networks.
To add a new Add-On contact, use your computer Internet connection , it will
automatically be displayed on your handset. New fring contacts can be added
directly from your handset.
15 Page
Making a call to a fring or other VOIP contact
¾ To call a VoIP contact:
1. Choose the user-id of the person you want to call and check that the user
is online.
Press the green (call) button on your handset
– or –
Press Menu and then choose call. From the submenu, choose the call
type you want.
– or –
Press your joystick button.
2. After a short time, a dialing sound is heard. If your contact answers the
call, your screen will display the name of the cont act and a "Call in
progress" message.
Figure 12 –Call in progress
During a call, the following options are available:
¾ Hang-up – end the current call.
¾ Loudspeaker / Earpiece – if your handset support routing.
¾ Navigate left or right – continue an open chat session or navigate
to your contact list, Add-Ons tab or call history.
¾Volume control – use the joystick up and down to control the
volume level of the incoming voice.
3. When you are finished with your conversation, click the red button on your
phone
– or –
Press Hang-up.
16 Page
The call is disconnected and a "Call ended" message appears.
Note: A WiFi call uses your WiFi connection while a "Cell" call uses your
3G/GPRS access point.
Figure 13 – Call ended
Making a SkypeOut call from fring
¾ To make a SkypeOut call
1. Press Menu.
2. From the Call submenu, choose SkypeOut call.
3. Dial the international number (begins with a +)
4. Press Ok.
Your call is dialed.
Note: To make a SkypeOut call from fring, you must have sufficient SkypeOut
credits.
Making a cellular call from fring
You can call your contacts from the fring contact list exactly as you would call
them from the contact list of your handset. Dialing a cellular call from frin g uses
your regular cellular voice plan.
17 Page
Receiving a fring call
fring allows you to both make and receive calls using voice-over-IP (VoIP)
technology.
¾ To receive a fring call
A call screen appears including the nickname of the caller.
Click accept using your left soft key
- or –
Press the green (call) button on your handset.
Chatting
fring lets you chat with your contacts using instant messaging. You can chat with
one or more of your contacts simultaneously.
Chatting with a contact
¾ To initiate a chat:
1. From your contact list, select the contact you want to chat with and press
Menu.
Note: chat is only available for contacts that are listed through fring or
another Add-Ons.
2. Select Chat from the Options menu.
The chat screen appears.
As always,
dictionary, number,
symbol and
language options
are available.
Figure 19 – Chat window
3. In the text entry area, write your message and press Send.
18 Page
Navigating between chats
If you choose to have two or more chats simultaneously, each will have a
separate tab. Navigate between the chats using the right and left joystick keys.
Ending a chat
¾ To end a chat:
Press Options Æ Close.
Viewing offline chat messages
Chat messages can be received even when you are offline. If you have received a
message, it will appear as an additional tab when you open fring. If you have
received messages from more than one user, a tab opens for each user,
displaying the messages they sent.
File Transfer
fring enables you to exchange files with your contacts (currently only works with
fring, Skype, Yahoo and MSN).
Sending a file
¾ To send a file from your handset to one of your contacts:
1. From the contact list, select the contact you want to send the file to and press Menu.
2. Select Send file and the file type you wish to send (Image, Video, Music or
browse your handset for a different type)
4. At that point, the other side should approve the transfer. If accepted, the file
transfer status will be shown in the Transfers tab.
19 Page
Receiving a file
¾ To receive a file from one of your contacts:
1. If one of your contacts sends you a file, you should get an approval
request.
Figure 22 – Transfer confirmation Figure 23 – Transfers tab
2. Click ok to accept the file
3. The file progress bar will show you some information about the file
4. Once the transfer is complete, you'll get a message asking you where you
would like to save the file.
5. Choose the directory and the folder
Figure 24 – Saving location
5.Once you have saved the file, you can open it from the Transfers tab.
20 Page
Managing Your Contact List
All of the contacts from your handset automatically appear in your contact list, in
addition to the contacts from your selected VoIP services (e.g., Skype). Within
your contact list you can:
•Search through your contact list (See Error! Reference source not
found. above)
• Make a fring call (See Making a Call above)
• Initiate a chat (See Chat above)
• Invite a friend
• Dial a number (See Making a Call above)
• Search for a fring contact
• Remove a fring contact
• Show or hide your handset contacts in your fring contact list
Note: If you delete or update a contact in your handset's contact list, the details
will be automatically updated in your fring contact list.
Adding a new contact
You can search for a contact who has already registered with fring and add her or
him to your contact list.
¾ To search for a fring contact in the fring network:
1. From the contact list choose Menu.
The Options menu opens.
2. Choose the Add new buddy option.
Your address book will open. You can scroll and select any contact.
The contact's phone number will be shown on the search screen and an
option to 'Add' or 'Cancel' will appear. If the user is already a fring user,
the contact will be added to your contact list. If the user has not yet
registered with fring, an SMS will be sent to him, asking him/her to join
fring.
3. If you click 'Other' on the address book screen, you'll be able to
manually enter the phone number (including the int. prefix) and click add.
If the user is already a fring user, the contact will be added to your
contact list. If the user has not yet registered with fring, an SMS will be
sent to him, asking him/her to join fring.
Note: If you are using a 'WiFi only' device, you will not be able to use this
feature.
Removing a contact
Only fring contacts can be removed from your contact list.
¾ To remove a fring contact:
Select a fring contact from the list, press Menu and choose Remove buddy.
21 Page
The contact is removed.
Showing and hiding your phone contacts
By default, your phone contacts are displayed in your contact list. You can toggle
between showing and hiding phone contacts.
¾ To select whether phone contacts are displayed in your fring contact
list or not:
1. Press Menu and choose Settings.
2. If Show Phone Contacts appears, your phone contacts are currently
hidden. To show them, choose Show Phone Contacts.
If Hide Phone Contacts appears, your phone contacts are currently
displayed in your fring contact list. To hide them, choose Hide Phone Contacts.
Adding or Signing In to an Add-On
You can add a new Add-Ons or sign-in as a different user at any time.
¾ To add a new Add-On or to sign-in as a different user:
1. Press Menu and choose Go To.
2. From the submenu choose Add-Ons.
A screen opens displaying the available Add-Ons.
Follow the process defined in the
in this guide.
Adding Your Add-Ons – (optional) section
Using Twitter and Add-Ons
If you have already opened a Twitter account, you can use it with fring. This is
also true for Facebook, Gmail, Orkut and more.
Using Twitter with fring
Once you have signed into Twitter, you can send Twitter messages directly from
your fring contact list.
¾ To send a Twitter message
3. Locate the Twitter contact in your fring contact list
4. From the Menu, choose Chat.
5. Type your Twitter message and press Send.
Your message is sent.
22 Page
Using other Add-Ons with fring
Using Add-Ons is similar to using Twitter. Once subscribed to an Add-on, a
contact with the add-on's name will appear in your contact list.
¾ To use the Add-On:
1. Locate the Add-On contact in your fring contact list (e.g Gmail notifier).
2. Choose View using your left soft key.
You have now accessed to your Add-on and can use its features.
History tab
The history tab keeps a record of every incoming or outgoing voice event in fring.
To view the history tab, move the joystick to the right or to the left.
Figure 25 - History Tab
The icons on the left side represent the following events:
Outgoing call (blue up arrow)
Missed call (red down arrow)
Incoming call (green down arrow)
Note: If you have chosen to display your phone contacts in fring, voice events
from your phone also appear in the history tab.
23 Page
You can view the details of the listed call by choosing Call details:
Figure 14 - Call Details
The Options menu in this screen allows you to:
Option
Description
Call Make a call. If the selected contact is a VoIP contact
(e.g., fring, Skype), the call is a VoIP call. If the
contact is a regular mobile contact, the call is made
using your cellular plan. See the
Making a Call section
in this guide.
Chat Chat with your selected contact. See the Chatting
section in this guide.
Send file Send a file from your handset to the selected contact
(currently only works with frin g, Skype, Yahoo and
MSN)
Go to A shortcut to your open tabs
Delete Delete the entry from the history list.
Clear list Clear the entire history list.
24 Page
Connection manager
Figure 27 – Connection manager
Change connection
To manually change your fring connection, select Menu > Settings >
Connection Manager > Change Connection. You can choose your
desired Access point from the results.
Figure 28 – Change connection
If fring is unable to connect using the chosen Access point you'll have an
option to let fring search automatically for the best access point from the
phone's list.
25 Page
Search for WLAN
To search for available Wireless LAN on fring, select Menu > Settings >
Connection manager > Search for WLAN. You can then choose your
desired WLAN from the results. To view the details of a network press the
joystick in.
Figure 29 – Search for WLAN
Choose the WLAN to which you would like to connect and press Connect
with your left soft key. If the WLAN network is secure, you will be required
to enter a pre-shared key.
Settings
Under the connection settings menu you can choose whether you'd like
fring to be restricted to one type of connection (ex."Wi-Fi on ly") or 'Always
ask' which connection you'd like to use when fring is opened.
Figure 30 - Settings
26 Page
Connection Group
The AP-Group Management stores a list of Access Points you would like to
use repeatedly. This option allows you to easily prioritize the way fring
connects to the internet. If you've successfully connected to fring using a
specific Access point, you can choose whether you'd like to add this Access
point to the group. In the AP group you can click on Options Æ down/up
to change the priority of a specific Access point.
Figure 31 – Connection group
27 Page
Privacy settings
To change the privacy settings, go to Menu > Settings > Privacy settings.
The following screen appears:
Figure 32 - Privacy settings
1. Find me by my number – If enabled, other users will be able to search you
by your phone number and not only by your nickname. If disabled, us ers will
only be able to search you by your nickname.
Note: This option is only available if you've not inst alled fring through the sms
process.
2. Show fring signature – fring adds periodic signature to your
Skype/MSN/Google talk messages to let your friends know that you're using
your mobile on fring and therefore typing slowly. If you disable this here the
signature will not appear.
3. Show fring mood msg. – Once you're logged in with your
Skype/MSN/Google talk on fring your mood message will be changed so your
friends will know that you're on fring. You can disable th is feature here.
28 Page
Choosing whether fring runs
automatically on startup
You can decide whether you would like fring to run automatically on startup.
¾ To change whether fring runs automatically on startup or not:
1. Press Menu and choose Settings.
2. If Disable autostart appears in the submenu, fring is currently running
when you turn on your handset. To prevent fring from running
automatically, choose Disable autostart.
If Enable autostart appears in the submenu, fring currently does not run
automatically when you turn on your handset. To allow fring to run
automatically, choose Enable autostart.
Your preference is saved.
Note: If you are using fring over 3G/GPRS, You may want to disable this
option when traveling abroad due to roaming charges.
Uninstalling fring
¾ To uninstall fring:
1. From the Start menu on your handset, click Settings.
2. In the System tab, choose Remove Programs.
A list displaying the applications currently in stalled on your handset opens.
3. Choose fring and press Remove.
A message opens indicating that the fring client will be removed.
4. Press Yes.
The fring client is removed from your handset.
29 Page
Troubleshooting
I didn't receive the SMS Message with the download link.
Please make sure you've entered your
If you still haven't received the SMS, please
happy to help.
cell phone number correctly and try again.
contact our support team who will be
I get a message saying "Memory Full".
If your memory is full, clear some space by erasing files (e.g., applications, music
files). Once there is sufficient available space, try downloading again.
I've downloaded and installed fring but cannot find it on my handset.
Where was it installed?
A shortcut should appear under the Start Menu of your handset.
I forgot my password.
Please go to
I tried to route the audio to the earpiece and now I have sound issues
(microphone doesn't work and/or I can't hear anything).
Currently, audio routing between the speakerphone and the earpiece is only
available on most HTC handsets and some other devices. If you encounter sound
issues, go to Menu > Settings > Disable earpiece.
http://www.fring.com/password
30 Page
Frequently Asked Questions
Downloading & Installing fring
How do I download fring?
fring can be downloaded from the fring website (www.fring.com/download), fring
WAP site (wap.fring.com) or via an SMS invitation sent by your friend.
For detailed information about downloading fring, see th e
Installing fring
section in this guide.
Is fring free?
Yes. fring's service is free. Your cost for using fring is the standard data tariff for
air time it takes to download and use fring.
When using fring over 3G data networks, please be aware that you will be su bject
to the data usage costs that your service provider charges. If you are using an
unlimited 3G data plan you can talk as much as you like for free.
As a guideline for calculating your data charges when using f ring, assume that
fring requires 2MB of data per 15 minutes of talk time.
Why do you need my phone number and Email address?
Downloading and
We use your phone number to send an SMS message with a link to download
fring. This number is then used as your user-id. Your Email address is optional
and we will use it to notify you about new system enhancements.
I've received the SMS, how do I install fring?
Refer to the
Downloading and Installing fring section in this guide.
31 Page
Registering to fring
Can I use more than one user-id on my handset?
No, each handset is limited to a single user-id.
Can I add more than one account from the same Add-On (e.g., Skype) to
my fring account?
No, you can only be signed into a single account for each Add-On at a time.
I bought a new handset; can I use the same user-id and password?
Yes. Download the application again and install it on y o ur new handset. Enter the
same fring nickname and password you used with the old handset. Make sure to
download the correct version for your handset.
I bought a new handset and I have a new phone number (Sim card). I
would like to use my fring account on my new phone. Can I do that?
Currently this option is not available. Please
will help you out. Alternatively, you can download fring again, register yourself
with a new user-id and add your old contacts back using fring's search application
contact our support team and they
How do I edit my WLAN settings?
¾ To edit one of your access points:
1. From the Start menu on your handset choose Settin gs.
2. In the Connections tab choose Comm Manager.
3. In the Settings menu, navigate to the WLAN settings option and choose
it.
My client looks like it is connecting forever – what should I do?
It's possible that the GPRS Internet connection on your phone is not configured
properly. Although you may be able to access the Internet, you are probably
using a WAP connection, which is limited. In order to use frin g a standard
GPRS/3G connection is required.
32 Page
General
Can I use my Bluetooth instead of GPRS/3G/WiFi?
It might be possible. You need to configure your Bluetooth dongle on your PC and
your Window Mobile device. To edit your Bluetooth settings on your Windows
Mobile device click on
Start Æ Settings Æ Connections tab Æ Comm manager Æ Choose Settings
Æ Bluetooth settings
What's the difference between "WiFi" and "Cell"? What does it mean?
A WiFi call uses your WiFi connection while a "Cell" call uses your 3G/GPRS
access point.
Can I add contacts from other messaging services like QQ?
Not at this time. This option will be available in a future version
How do I search for other contacts?
You can search through your contact list to find contacts quickly.
¾ To search your contact list:
Start typing the name of your contact.
The list is filtered according to the characters you have typed.
How do I add new contacts to my fring list?
See the Error! Reference source not found. section in this guide.
What happens to my cellular calls while I'm on a call through fring?
Cellular calls take precedence over fring calls. If you are on a fring call and a
Cellular call comes through, your fring call will be disconnected.
I've finished a Cellular call and fring disappeared, where is it?
If fring was accidentally closed, reopen it from the Start menu. (or Start >
Programs)
Does fring have any effect on my phone battery?
Unfortunately, yes. fring uses wireless data on your mobile phone and therefore
tends to consume extra battery power. The actual usage depends on the length
of the call and special requirements imposed by your specific network.
33 Page
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.