Frigidaire PLHT217TAK2, PLHT217TAK1, PLHT217TAK0, PLHT217TAB2, PLHT217TAB1 Owner’s Manual

...

,,4-5

_....... 6-9

........ ,10

perature Controls ....... 11

Looking Inside .......... 12 - 14 U

Ice Service .................... 15 U

Food Storage D

& Energy Saving Tips ....... 16

Normal Operating Sounds ,,17

Care & Cleaning .......... 18- 19

Iml

Warranty ...................... 20 W

Espanol ........... 23

Fmnesais ........... 45

Before You Call ............... 21

READ AND SAVE THESE INSTRUCTIONS PIN240400104(0107)

Congratulations on your purchase of a new refrigerator! We here at Electrolux Home Products are very proud of our product and we are completly committed to providing you with the best service possible. Your satisfaction is our #1 priodty.

Please read this Use & Care Manual very carefully. Itcontains valuable information on how to properly maintain your new refrigerator.

We know you'll enjoy your new refrigerator and Thank You for choosing our product. We hope you consider us for future

purchases.

PLEASE READ AND SAVE THESE INSTRUCTIONS This Use & Care Manual provides specific operating

instructions for your model. Use your refrigerator only as instructed in this manual. These instructions are not meant

to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.

Please record your model and serial numbers below for future reference. This information is found on your serial

plate located inside the refrigerator compartment.

Questions?

1-800-944-9044

(United States)

1-866-213-9397

(Canada)

Extend Your Warranty Protection

With An

Extended Service Contract

CALL 1-800-944-9044

To Enjoy These Benefits:

Total freedom from repair bills so

unexpected repairs won't upset your budget.

Model Number: Serial Number:

Purchase Date:

Fast, convenient toll-free service isjust a phone call away.

Top-quality repairs by factory-trained experts.

Quick access to genuine replacement parts so you can rest assured your

refrigerator is repaired with the proper components.

Please attach sales receipt

here for future reference.

Please complete and mail in the Product

Registration Card included with your

refrigerator.

FOR YOUR SAFETY

Do not store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read pro- duct labels for warnings regarding flammability and other

hazards.

Do not operate the refrigerator in the presense of explosive fumes.

Avoid contact with any moving parts of automatic ice maker.

Remove all stables from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.

CHILD SAFETY

Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the refrigerator is unpacked. Children should NEVER use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly

cause suffocation.

PROPER DISPOSAL OF YOUR REFRIGERATOR OR FREEZER

Risk of child entrapment

Child entrapment and suffocation are not problems of

the past. Junked or abondoned refrigerators or freezers are still

dangerous - even if they will sit for "just a few days." If you are

getting rid of your oldrefrigerator or freezer, please follow the

instructions below to help prevent accidents.

Before you throw away your old refrigerator/freezer:

Remove doors. Leave shelves in place so children may not easily climb

inside. Have refrigerant removed by a qualified service

technician.

ELECTRICAL INFORMATION

The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., AC only electric outlet.

The power cord of the appliance is equipped with a three-prong grounding plug for your protectionagainst

electrical shock hazards. It must be plugged directly into a properly grounded three-prong receptacle. The

receptacle must be installed in accordance with local

codes and ordinances. Consult a qualified electrician.

Do not use an extension cord or adapter plug.

Immediately repair or replace any power cordthat

becomes frayed or damaged.

Never unplug the refrigeratorby pullingon the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord.

Unplug the refrigerator before cleaning and before replacing a light bulb to avoid electrical shock.

Performance may be affected if the voltage varies by

10% or more. Operating the refrigerator with insufficient power can damage the compressor. Such damage is not covered under your warranty.

Do not plug the unit into an outlet controlled by a walt switch or pull cord to prevent the refrigerator from being

turned off accidentally. Avoid connecting refrigerator to a Ground Fault

Interruptor (GFI) circuit.

ThisUse& CareManualprovidesspecificoperating instructionsforyourmodel.Usethe refrigeratoronlyas instructedinthisUse&CareManual.Beforestartingthe

refrigerator, follow these important first steps. LOCATION

Choose a place that is near a grounded electrical outlet.

De Net use an extension cord or an adapter plug. If possible, place the refrigerator out of direct sunlight

and away from the range, dishwasher or other heat

sources.

The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.

Consider water supply availability for models equipped with an automatic ice maker.

INSTALLATION

De Not install the refrigerator where the temperature

will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper

temperatures inside the refrigerator.

LEVELING

All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator isequipped with adjustable front rollers to help level your unit.

To Level Your Refrigerator:

1. Remove toe grille.

ref i rato 2.

Installation Clearances

Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical

connections:

Sides & Top ............... 3/8"

Back 1"

DOOR OPENING

Your refrigerator should be positioned to allow easy access to a counter when removing food. To make this possible, the direction in which the doors open can be reversed. See Door Removal & Reversal Instructions on page 6.

Use fiat-blade screwdriver or 3/8" socket wrench to adjust front rollers.

66_ _se #e_i#wh_ 6#e_ea _aifwa_ The _6_g_ra

Before Installing The Water Supply Line, You Will Need

Basic Tools: adjustable wrench, flat-blade screwdriver, and Phillips TM screwdriver Access to a household cold water line with water pressure between 20 and 120 psi.

A water supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water

pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown). A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type

shutoff valve. A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigeratorfrom electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shut

off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as shown.

5. Push water supply line into water valve inlet as far as it will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of refrigerator as shown.

7. Coil excess water supply line (about 2½ turns) behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that leak.

9. Reconnect refrigerator to electrical power source.

10. To turn ice maker on, lower wire signal arm (see ice maker front cover for ON/ OFF position of arm).

iii_i

Cabinet Hole Plugs

Hinge Hole Plug

Si:rew _

ToolsNecessary:

Phllllp6" head

_'=

Quadr_( head

screwdriver

Socket AclJusJal_e

WrenChSet Wrench

DOOR REMOVAL AND REVERSAL INSTRUCTIONS:

1. Remove toe grille and top hinge cover.

2. Remove top hinge with 3/8" hex driver and lift freezer door off of center hinge pin. Set door aside.

3. Unscrew center hinge pin using adjustable wrench and save for reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge and shim to

slide out. Tighten screws.

6. Loosen two outside screws on opposite side of refrigerator, remove inside screw and install center hinge.

7. Remove bottom hinge with 3/8" hex driver. Reinsert two outside screws in holes and tighten. Inside screw will go to opposite side in step 8.

8. Remove two outside screws on opposite side of refrigerator and install bottom hinge. Insert and tighten screw saved from step 7.

9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole in hinge and tighten with adjustable wrench.

10. Reverse door handles (see instructions on next page).

11. Move freezer and refrigerator door stops to opposite side. Before starting screws, use an awl to puncture the foam.

12. Position refrigerator door onto bottom hinge pin and screw center hinge pin through center hinge into top of door. Close refrigerator door to help align hinge hole.

13. Tighten center hinge pin with adjustable wrench.

14. Remove cabinet and hinge hole plugs and move to opposite side.

15. Lower freezer door onto center hinge pin.

16. Close freezer door. Have an assistant lift up on opposite side of door while tightening screws to install top hinge.

17. Replace toe grille and top hinge cover.

18. Plug in electrical power cord and turn refrigerator temperature control to center position. Adjust setting as necessary.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2. Remove short trim piece by sliding trim straight up and off of handle bracket.

3. Remove screw attaching top of handle to door.

4. Magnetic Nameplate Models: Gently pry magnetic nameplate frame from

door. Remove nameplate from its frame, turn frame upside down and

install in old handle holes. Insert magnetic nameplate into frame. Self-Adhesive Nameplate Models: Gently peel off nameplate from door

and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Reinstall handle on opposite side, using same hole as nameplate.

2. Attach handle to bottom of door.

3. Slide trim piece straight down onto handle bracket.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2. Swing bottom of handle away from the door and slide handle straight up and off of dovetail button.

3. Remove screw and dovetail button and install on other side, using the same holes as nameplate.

4. Magnetic Nameplate Models: Use putty knife to gently pry magnetic nameplate frame from door. Remove nameplate from its frame, turn frame upside down and install in old handle holes. Insert magnetic nameplate

into frame. Self-Adhesive Nameplate Models: Use putty knife to gently peel off name

plate from door and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Start with handle offset away from door. Place top of handle over dovetail button, swing handle into an upright position and pull downward, locking it into place.

2. Secure bottom of handle with two screws removed earlier.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2. Remove button plug using edge of putty knife.

3. Remove screw on side of freezer door and remove handle.

TO ATTACH FREEZER HANDLE:

1. Secure side of handle to door and replace button plug.

2. Secure handle to bottom of door.

TRIM REMOVAL (FULL*LENGTH TRIM MODELS ONLY)

In some models, the refrigerator door has a full length trim piece which

continues from the bottom of the handle to the bottom of the door. The top of the trim attaches to the handle bracket (Figure 1) or fits around the base

of the handle (Figure 2). An adhesive "trim lock" is positioned about halfway down. The bottom of the trim is held in place by either an adhesive trim lock,

or a trim lock with two prongs inserted into a hole on the face of the door. TO REMOVE TRIM:

1. Remove trim by gently pulling trim lock areas out and away from door.

2. When trim is free from door, slide the trim straight down and away from base of handle.

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

Figure 1 Style Handles

1. Remove two screws attaching handle to top of refrigerator door.

2. Remove screw attaching bottom of handle to door.

3. Remove two hole plugs and hinge pin plug on top of door and install on opposite side. Use Phillips head screwdriver to remove plastic screw plug from front of door and install on opposite side

Figure 2 Style Handles

1. Remove two screws attaching handle to top of refrigerator door.

2. Swing top of handle away from door and slide handle down and off of dovetail button.

3. Remove screw and dovetail button and install on other side, moving hole plugs from corresponding holes to opposite side.

TO ATTACH REFRIGERATOR HANDLE:

Figure 1 Style Handles

1. Secure bottom of handle with screws.

2. Secure top of handle with screws.

Figure 2 Style Handles

1. Start with handle offset away from door. Place bottom of handle over dovetail button, swing handle into an upright position and pull upward,

locking it into place.

2. Secure top of handle with screws. TO ATTACH TRIM:

1. Slide both trim locks out of trim.

2. Insert new adhesive trim locks contained in your literature pack.

Figure 1

3. Install trim to handle by sliding under base of handle. Carefully align trim and press down at trim lock locations.

4. Use rubbing alcohol to remove any adhesive residue from old trim lock locations.

Figure 2

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to top of refrigerator door.

2. Remove button plug using edge of putty knife.

3. Remove screw on side of refrigerator door and remove handle.

4. Reverse freezer and refrigerator handles as shown in figure 3.

TO ATTACH REFRIGERATOR HANDLE:

1. Secure side of handle to door and replace plug button.

2. Secure handle to top of door.

Figure 3 - Handle Reversal

Refrigerator Door Without Trim

REMOVING STAINLESS STEEL DOORS AND HANDLES

To Remove Doors

Stainless steel doors are not reversible. Follow these steps to remove doors.

1. Remove toe grille and top hinge cover.

2. Remove top hinge and lift freezer door off of center hinge pin. Set door

aside.

3. Unscrew center hinge pin using adjustable wrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and loosening

two outside screws enough to allow hinge to slide out.

6. Remove bottom hinge. Reinsert two outside screws in holes and tighten.

7. Reverse steps 1 - 6 to reinstall doors

To Remove Handles

1. Firmly hold freezer handle while loosening set screws with 3/32" allen wrench. Remove freezer handle.

2. Repeat step 1for refrigerator door.

Typical Handle

Freezer Light

Ice Bucket

Freezer

Control

Retrlgerator Control

Dell Drawer Covet

Dell Drawer

Half Shelf Wine Rack

Special Item

Full Shelf

Crisper Drawers

Fixed Door Bin

Rack

Dairy Door

Tall Bottle

Retainer

Snugger

Door Bin

Fixed Door Sin

Door Rack

_Toe Grille

Features may vary according to model

COOL DOWNPERIOD

To ensure safe food storage, allow the refrigerator to operate with the doors closed for at least 8 to 12 hours before loading it with food.

REFRIGERATOR & FREEZER CONTROLS

re tb stabilize before

TEMPERATURE ADJUSTMENT

NOTE: Whenfirsttuming refrigeratoron move refrigerator and freezer controlsto V which is the recommended

intalsett ng After 2,$hours, adjustthe controsas needed.

Adjust temperature gradually: move the knob in small

increments, allowing the temperature to stabilize. For colder temperatures, turn the knob towards Cold

Forwarmer temperatures, turntheknobtowardsWarm.

Turningtherefrigeratorcontrolwillchangetemperatures inboth compartments. Forexample, ifthe refrigeratorcontrolisturned toa coldersetting, thefreezer control may have tobe adjusted to a warmer setting. Turning the freezer control will change only thefreezer temperature.

To maintain temperatures, a fan circulates air in the refdgerator

and freezer compartments. For good circulation, do not block cold air vents with food items.

Recommended

setting

Freezer Control (some models_

Refrigerator Control (some mode]s_

iii

If Refrigerator compartment Is Too Warm Turn Refrigerator Control Slightly Towards Cold.

If Refrigerator compartment Is Too Cold Turn Refrigerator Control Slightly Towards Warm.

If Freezer compartment Is Too Warm Turn Freezer Control Slightly Towards Colder.

If Freezer compartment Is Too Cold Turn Freezer Control Slightly Towards Warmer.

To Turn Refrigerator Off Turn Refrigerator Control To 0.

Refrigerator & Freezer Control (some models)

TEMPERATURE ADJUSTMENT GUIDE

SHELFADJUSTMENT

Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting

the shelves, remove all food.

To adjust sliding shelves:

Remove shelf by pulling forward to stop position. Lift front edge up and pull out.

Replace the shelf on any pair of rails by reversing this procedure.

To adjust cantilever shelves:

Lift front edge up. Pull shelf out.

Replace the shelf by inserting the hooks at rear of the shelf into the walt

bracket. Lower the shelf into the desired slots and lock into position.

SpillSafe TM glass shelves (some models) catch and hold accidental spills. In

some models, the SpillSafe TM shelves slide out for easy access to food and for fast cleaning. The shelves slide out independently of the cantilever brackets. Just pull the front of the shelf forward. The shelf can be extended as far as the

stopper will allow but it is not removable from the cantilever bracket.

Sliding Wire Shelf

Sliding Glass Shelf

Full Width Cantilever Glass Shelf

Cantilever Glass Shelf - Fixed and Sliding

DOOR STORAGE

Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans. Frequently used items

can be quickly selected. Some models have door racks or bins that can accommodate

gallon-sized plastic drink containers and economy-sized jars and containers. Some racks are adjustable for maximum

storage capacity. The dairy compartment, which is warmer than the general

food storage section, is intended for short term storage of cheese, spreads, or butter.

Door Rack

TALL BOTTLE RETAINER (SOME MODELS)

The Tall Bottle Retainer keeps tall containers in the bin from falling forward when opening or closing the refrigerator door.

To install, hold the retainer at the top, and slide it over the outside wall of the bin, as shown in the diagram. The Tall

Bottle Retainer works best with a Bin Snugger.

Tall Bottle Retainer (left) and Bin Snugger (right)

SPECIAL ITEM RACK (SOME MODELS)

The innovativedesign of the Special Item Rack allows you to store a six-pack of 12 ounce drink cans, a bottle of wine,

a two-liter soft drink bottle, or a carton of eggs. The Special

Item Rack mounts on the left side of your refrigerator. To

install, just slide the Special Item Rack onto any shelf as shown in the drawing.

ADJUSTABLE DOOR BINS

Some models have adjustable door bins that can be moved

to suit individual needs.

To move door bins

1. Lift bin straight up.

2. Remove bin.

3. Place bin in desired position.

4. Lower bin onto supports until locked in place.

Adjustable Door Bin

Special Item Rack

CRISPERS (SOME MODELS) The crispers, located under the bottom refrigerator shelf,

are designed for storing fruits, vegetables, and other fresh produce.Wash itemsinclear waterand remove excess water before placingthem inthe crispers. Items with strong odors or high moisture contentshould be wrapped before storing.

Crisper Drawer

HUMIDITY CONTROL (SOME MODELS)

The Humidity Control, present on some models withcrisper drawers, allowsyou to adjust the humidity withinthe crisper. This can extend the life of fresh vegetables that keep best in high humidity.

DELl DRAWER (SOME MODELS)

Some models are equipped with a Dell Drawer for storage of luncheon meats, spreads, cheeses, and other dell items.

I i i_!?i

Dell Drawer

WINE RACK (SOME MODELS) The Wine Rack stores bottles of wine, or single two-liter

plastic bottles of juice or soda pop. To install, slide the Wine

Rack onto the shelf with the curve facing in. To remove,

slide the Wine Rack out. Install on either side of shelf.

High

Crisper Humidity Control

Wine Rack

If your refrigerator has an automatic ice maker, it will provide a sufficient supply of ice for normal use. During the initial startup of your refrigerator, however, no ice will be produced during the first 24 hours of operation. Automatic ice makers are also optional accessories that may be installed in most models at any time. Call your local dealer for information.

TURNING YOUR ICE MAKER ON

After the plumbing connections have been completed, the water supply valve must be opened. Place the ice container under the ice maker, pushing it as far back as possible. Lower the wire signal arm to its "down" orON position. New plumbing connections may cause the first production of ice cubes to be

discolored or have an odd flavor. These first cubes should be discarded until the cubes produced are free of discoloration and taste.

TURNING YOUR ICE MAKER OFF

To stop the ice maker, lift the wire signal arm until it clicks and locks in the "up" or OFF position. The ice maker also turns off automatically when the ice container isfull. If your model has an adjustable freezer shelf, place the shelf in the lower position, so that the wire signal arm will hit the ice when the

container is full.

ice Maker

ICE MAKER TIPS

Ice cubes stored too long may develop an odd flavor. Empty the ice container and ensure that the wire signal arm is

in its "down" or ON position. The ice maker wilt then produce more ice. Occasionally shake the ice container to keep ice separated.

Keep the wire signal arm in its"up" or OFF position until the refrigerator is connected to the water supply or whenever

the water supply is turned off. The following sounds are normal when the ice maker is operating:

Motor running Ice loosening from tray

Ice dropping into ice container Running water

Water valve opening or closing

Wash the ice container in warm water with mild detergent. Rinse well and dry. Stop the ice maker when cleaning the freezer and during vacations.

If the ice maker will be turned off for a long period of time, turn the water supply valve to the closed position.

FOOD STORAGE IDEAS

Fresh Food Storage

The fresh food compartment should be kept between 34° F and 40 ° F with an optimumtemperature of37 ° F. Avoid overcrowding the refrigerator shelves. This reduces the circulationofair around the food and results in uneven

cooling.

Fruits and Vegetables

Storage inthe crisper drawers traps moisture to help preserve the fruit and vegetable quality for longer time periods.

Meat

Raw meat and poultryshould be wrapped securely soleakage and contamination of otherfoods or surfaces does not

OCCUr.

Frozen Food Storage

The freezer compartment should be kept at 0° F orlower. A freezer operates most efficiently when itis at least 2/3 full.

Packaging Foods for Freezing

To minimize dehydration and quality deterioration, use aluminum foil, freezer wrap, freezer bags or airtight containers.

Force as much air out of the packages as possible and seal them tightly. Trapped air can cause food to dry out, change color, and develop an off-flavor (freezer burn).

Wrap fresh meats and poultry with suitable freezer wrap prior to freezing.

Do not refreeze meat that has completely thawed.

Loading the Freezer

Avoid adding too much warm food tothe freezer at one time. This overloads the freezer, slows the rate offreezing, and can raise the temperature offrozen foods.

Leave a space between the packages, so coldair can circulate freely, allowing food to freeze as quickly as possible.

Avoid storing hard-to-freeze foods such as ice cream and orange juice on the freezer door shelves. These foods are best stored in the freezer interiorwhere the temperature varies less.

ENERGY SAVING IDEAS

Locate the refrigerator in the coolest part of the room, out of direct sunlight,

and away from heating ducts or registers. Do not place the refrigerator

next to heat-producing appliances such as a range, oven, or dishwasher. If this is not possible, a section of cabinetry or an added layer of insulation between the two appliances will help the refrigerator operate more

efficiently.

Level the refrigerator so that the doors close tightly. Refer to this Use & Care Manual for the suggested temperature control

settings.

Periodic cleaning of the condenser will help the refrigerator run more

efficiently. See the Care and Cleaning Chart on page 18.

Do not overcrowd the refrigerator orblock cold air vents. Doing so causes

the refrigerator to run longer and use more energy.

Cover foods and wipe containers dry before placing them inthe refrigerator. This cuts down on moisture build-up insidethe unit.

Organize the refrigerator to reduce door openings. Remove as many

items as needed at one time and close the door as soon as possible.

UNDERSTANDING THE SOUNDS YOU MAY HEAR

Your new high-efficiency refrigerator may make unfamiliar sounds. Don't bealarmed, these are all normal sounds. Hard

surfaces, such as vinyl or wood floors, walls, and kitchen cabinets may make sounds more noticeable. Listed below are descriptions of some of the most common sounds you may hear, and what is causing them.

A. Evaporator

The flow of refrigerant through the evaporator may create a boiling or gurgling sound.

B. Evaporator Fan

You may hear air being forced through the refrigerator by the evaporator fan.

C. Defrost Heater

During defrost cycles, water dripping onto the defrost heater may cause a hissing or sizzling sound. After defrosting, a popping sound may occur.

D. Automatic Ice Maker

If your refrigerator is equipped with an automatic ice

maker, you wilt hear ice cubes falling into the ice bin.

E. Cold Control & Defrost Timer

These parts can produce a snapping or clicking sound when turning the refrigerator on and off. The timer also produces sounds similar to an electric clock.

F. Condenser Fan

If condenser coils are located underneath your refrigerator as shown in the drawing at the left, you have a condenser fan. You may hear air being forced through the condenser by the condenser fan.

G. Compressor

Modern, high-efficiency compressors operate much faster than older models. The compressor may have a high-pitched hum or pulsating sound.

H. Water Valve

If your refrigerator is equipped with an automatic ice maker, you will hear a buzzing sound as the water valve

opens to fill the ice maker during each cycle.

I. Drain Pan (Nonremovable)

You may hear water running into the drain pan during the defrost cycle. The drain pan will be located on top of the compressor for air-cooled condensers (black coils on back of refrigerator).

J. Condenser Coils (Fan-cooled models only)

Keepyourrefrigeratorandfreezercleantopreventodorbuild-up.Wipeupanyspillsimmediatelyandcleanbothsectionsat

leasttwicea year.Neverusemetallicscouringpads,brushes,abrasivecleanersorstrongalkalinesolutionsonany surface.Denotwashanyremovablepartsinadishwasher.Always unplug the electricalpewer cord from the wall

outlet before cleaning.

Care & Cleaning Chart

Part

Interior/Door Liner

Door Gaskets Drawers/Bins Glass Shelves

Toe Grille

Exterior and Handles

(Stainless Steel Models Only)

Condenser Coils

(Fan-cooled models only)

Condenser Coils

(Air-cooled models only)

Defrost Water Soap and water Pan

What To Use Tips and Precautions

Soap and water Baking soda and water

Soap and water Soap and water

Soap and water Glass cleaner

Mild liquid sprays Soap and water Mild liquid sprays

Vacuum attachment Soap and water

Soap and water Ammonia Stainless Steel Cleaners

Condenser Cleaning Brush is available from

your dealer. Vacuum Cleaner

Vacuum Cleaner

Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring

excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part.

Wipe gaskets with a clean soft cloth.

Do not wash any removable items (bins, drawers, etc.) in dishwasher.

Allow glass to warm to room temperature before immersing in warm water.

Vacuum dust from front of toe grille. Remove toe grille (See illustration on page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and dry.

Do not use commercial household cleaners, ammonia, or alcohol to clean

handles. Clean stainless steel front and handles with non-abrasive soapy water and a

dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel

cleaner. These cleaners can be purchased at most home improvement or major department stores. Always follow manufacturer's instructions. NOTE: Always clean, wipe and dry with the grain to prevent cross-grain scratching. Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse well, and wipe dry with a clean soft cloth.

No need to clean unless operating refrigerator under particularly dusty or

greasy conditions, or if there is significant pettraffic in your home. If cleaning is necessary, remove toe grille and use extended vacuum attachment and

condenser cleaning brush to remove dust build-up from condenser coils (see item "J" in illustration on pa£1e17for location).

Use the dusting tool attachment on your vacuum to remove dust build-up on the condenser coils (black tubes and wires) attached to the back of air-cooled refrigerators only.

Some models have defrost water pan located on top of compressor at bottom rear of refrigerator (see illustration on next page). Wipe water pan with damp

cloth. NOTE: The defrost water pan is NOT removable.

NEVER CLEAN CONDENSER (SOME MODELS)

Ifyour refrigeratoris equipped with a Never Clean condenser, there's noneed to cleanthe condenserundernormaloperating conditions. If the refrigerator is operated under particularly dusty or greasy conditions,or ifthere issignificant pettraffic in your home, itmay be necessary to periodically clean the

condenser for maximum efficiency.

REPLACING THE FREEZER LIGHT BULB

(SOME MODELS)

1. Unplug refrigerator.

2. Wear gloves as protection against possible broken

glass.

3. Unsnap lightshield as shown.

4. Unscrew and replace oldbulb withan appliance bulb of the same wattage.

5. Replace light shield.

6. Remember toplug the refrigerator back in.

Defrost Water Pan (some models)

Vacation and Moving Tips

Short

Vacations

Long • Turn off automatic ice maker and turn water supply valve to closed position.

Vacations • Clean interior thoroughly.

Moving

• Leave refrigerator operating during vacations of 3 weeks or less.

• Use all perishable itemsfrom refrigerator compartment.

• Turn automatic ice maker off, even if you will only be gone for a few days.

• Remove all food and ice if you willbe gone one month or more.

• Turn controls to "0" and disconnect power.

• Leave both doors open to prevent odors and mold build-up. Block doors open if

necessary.

• Remove all food and ice.

• Ifusing handcart, load from side.

• Adjust rollers all the way up to protect them during sliding or moving.

• Pad cabinet to avoid scratching surface.

REFRIGERATOR WARRANTY

Your refrigerator is protected by this warranty

WARRANTY THROUGHOURAUTHORIZEDSERVICERS, THECONSUMERWILLBE RESPONSIBLEFOR:

PERIOD WEWILL:

FULLONE-YEAR Oneyearfromoriginal Payallcostsfor repairingorrepIacinganypartsofthis Costs of service calls that are listed under NORMAL WARRANTY purchasedate appliancewhichproveto be defectivein materialsor RESPONSIBILITIESOFTHECONSUMER.*

UMITED2_-5TM Secondthroughfifth Repairor replaceanypartsinthe cabinetlineror Costsfor pickup anddeliveryof theappliancerequiredbecause YEARWARRANTY yearsfromoriginal SealedRefrigerationSystem(compressor,condenser, ofservice Costsforlabor,partsandtransportationotherthan (Cabinet Linerand purchasedate evaporator,drierandtubing)whichproveto be with respectto thecabinetlineror SealedRefrigerationSystem SealedSystem) defecUveinmaterialsorworkmanship

UMITED Timeperiodslisted Allof theprovisionsofthe fullwarrantiesaboveand Costs ofthetechnidan'straveltothe homeandanycostsfor

WARRANTY above the exclusionslistedbelowapply pickupanddeliveryof theappliancerequiredbecauseof (Applicable tothe service

StateofAlaska)

In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Iodustdes Inc. We authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must

be performed by us or an authorized Electrolux Home products North America servicer. In Canada, your appliance is warranted by WCI Canada Inc.

*NORMAL RESPONSIBILITIES

OFTHECONSUMER

EXCLUSIONS

IFYOU NEED SERVICE

This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below:

1. Proper use of the appliance in accordance with instructions provided with the product.

2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in accordance with all local plumbing, electrical and/or gas codes.

3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in house wiring.

4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,etc., which are not a part of the appliance when it was shipped from the factory.

5. Damages to finish after installation.

6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).

This warranty does not cover the following:

1. CONSEQUENTIAL OR iNCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.

NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.

2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in ordinary household use. The consumer shall pay for such service calls.

3. Damages caused by services performed by servicers other than Electrolux Home Products North America or its authorized servicers; use of parts other than genuine Electrolux Home Products parts; obtained from persons

other than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.

4. Products with original serial numbers that have been removed or altered and cannot be readily determined.

Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all

receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service under this warranty must be obtained by contacting Electrolux Home Products:

workmanshipExcludesoriginaland replacementice & Waterfilter cartridges (if equipped) Originaland

replacement cartridgesare warranted for 30 days (partsonly)

This warranty only applies in the 50 states of the U.S.A., Puerto Rico, and Canada. Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by Elentrolux Home Products North America, a division of White Consolidated

Industries Inc. In Canada, your appliance is warranted by WC] Canada Inc.

01-U-RE-02 (Rev. 12/2000)

USA 800°944°9044

Electrolux Home Products North America P.O. Box 212378

Augusta, GA 30917

Electrolux Home Products North America

6150 McLaughlin Road

Mississauga, Ontario

Canada

866.213.9397

L5R 4C2

+ 44 hidden pages