Frigidaire PLHT19WEK4, PLHT19WEB4, GLRT218WDS4, GLRT218WDK4, GLRT218WDB4 Owner’s Manual
...
Tog Mount
Welcome ....................... 2
Refrigerator
i!171
Safety instructions ............ 3
nsta_lation -= includes Connecting
Optional Ice MakerToWater Supply ..... 4 = 5
Door Removal ................ 6
Features at a Glance ......... 7
Temperature Controls ....... 8
Looking inside .......... 9 - 11
Water Dispenser
& ice Service ........... 12 - 14
Food Storage
& Energy Saving Tips ....... 15
Normal Operating Sounds..16
Care & Cleaning .......... 17- 18
Warranty ...................... 19
Espafiol ........... 21
Before You Call ............... 20
READ AND SAVE THESE INSTRUCTIONS P_N241_948oo(o_9_)
Congratulations on your purchase of a new refrigerator!
We here at Electrolux Home Products, Inc. are very proud
of our product and we are completly committed to providing
you with the best service possible. Your satisfaction is our
#1 priority.
Please read this Use & Care Manual very carefully. It
contains valuable information on how to properly maintain
your new refrigerator.
We know you'll enjoy your new refrigerator and ThankYou
for choosing our product. We hope you consider us for future
purchases.
PLEASE READ AND SAVETHESE iNSTRUCTIONS
This Use & Care Manual provides specific operating
instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not meant
to cover every possible condition and situation that may
occur. Common sense and caution must be practiced when
installing, operating and maintaining any appliance.
Questions?
1-800-944-9044
(United States)
1-866-213-9397
(Canada)
Extend Your Warranty Protection
With An
Extended Service Contract
CALL 1-800-944-9044
To Enjoy These Benefits:
Please record your model and serial numbers below
for future reference. This information is found on your
serial plate located inside the refrigerator compartment.
NOTE: Use only soap and water to clean serial plate,
Model Number:
Serial Number:
Purchase Date:
i i _ i_ iiiiiiiiiiiiiii
o
Total freedom from repair bills so
unexpected repairs won't upset your
budget.
Fast, convenient toll-free service is just
a phone call away.
Top-quality repairs by factory-trained
experts.
Quick access to genuine replacement
parts so you can rest assured your
refrigerator is repaired with the proper
components.
Please attach sales receipt
here for future reference.
Please complete and mail in the Product
Registration Card included with your
refrigerator.
_Please Read All instructions Before Using This Refrigerator.
FORYOUR SAFETY
• Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance. Read pro-
duct labels for warnings regarding flammability and
other hazards.
• Do not operate the refrigerator in the presence of
explosive fumes.
• Avoid contact with any moving parts of automatic ice
maker.
• Remove all staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after the refrigerator is
unpacked. Children should NEVER use these items to play.
Cartons covered with rugs, bedspreads, plastic sheets or
stretch wrap may become airtight chambers, and can
quickly cause suffocation.
These Guidelines Must Be Followed To Ensure That safety Mechanisms In This Refrigerator
Will Operate Properly,
PROPER DISPOSAL OFYOUR REFRIGERATOR OR
FREEZER
Risk of child entrapment
Child entrapment and
suffocation are not problems of
the past. Junked or abandoned
refrigerators or freezers are still
dangerous - even if they will sit
for "just a few days." If you are
getting rid of your old
refrigerator or freezer, please
follow the instructions below to
help prevent accidents.
Before you throw away your old refrigerator/freezer:
• Remove doors.
Leave shelves in place so children may not easily climb
inside.
Have refrigerant removed by a qualified service
technician.
ELECTRICAL INFORMATION
• The refrigerator must be plugged into its own
dedicated 115 Volt, 60 Hz., AC only electric outlet.
The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
electrical shock hazards, it must be plugged directly
into a properly grounded three-prong receptacle. The
receptacle must be installed in accordance with local
codes and ordinances. Consult a qualified electrician.
Do not use an extension cord or adapter plug.
• If the power cord is damaged, it should be replaced by
the manufacturer, service technician or a qualified person
to prevent any risk.
• Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging power cord.
• Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
• Performance may be affected if the voltage varies by
10% or more. Operating the refrigerator with insufficient
power can damage the compressor. Such damage is
not covered under your warranty.
• Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
• Avoid connecting refrigerator to a Ground Fault Interruptor
(GFI) circuit.
IMPORTANT: Turning the refrigerator tempeiature
control to "o" turns off the compressor and prevents
your refrigerator from cooling, but does not disconnect
the power to the light bulbs and other electrical
Components. To turn off power to your refrigerator
you must unplug the power cord from the wall outlet.
Grounding type
wa!!receptacle
cut, remove,
]
or bypass the
ThisUse& CareManualprovidesspecificoperating
instructionsforyourmodel.Usetherefrigeratoronlyas
instructedinthisUse&CareManual.Beforestartingthe
refrigerator,followtheseimportant first steps.
LOCATION
• Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
• The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
• Consider water supply availability for models equipped
with an automatic ice maker or water dispenser.
INSTALLATION
_Do Not install the refrigerator where the
temperature will drop below 55°F (13°C) or rise above
110°F (43°C). The compressor will not be able to
maintain proper temperatures inside the refrigerator.
Do Not block the toe grille on the
lower front of your refrigerator. Sufficient air
circulation is essential for the proper operation of
your refrigerator,
Installation Clearances
• Allow the following clearances for ease of installation.
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8"
Back 1"
LEVELING
All four corners of your refrigerator must rest firmly on a
solid floor.Your refrigerator is equipped with adjustable front
rollers to help level your unit.
To Level Your Refrigerator:
1. Remove toe grille.
2. Use flat-blade screwdriver or 3/8" socket wrench
to adjust front rollers.
NOTE: Raise the front of the refrigerator enough so
the doors close freely when opened halfway. The
refrigerator should slope _4"to W' from front-to-back.
Then level the "efrigerator from side to side.
Raise
DOOR OPENING
NOTE: Ifyour refrigerator is placed with the door hinge
side against a wall. you may have to allow additional
space so the door can be opened wider.
Your refrigerator should be positioned to allow easy access
to a counter when removing food.
WATER DISPENSER DRIP TRAY
The drip tray for
your refrigerator's
water dispenser
comes from the
factory detached. Its
removal also allows
easy cleaning To
install the drip tray,
fit it into the bottom
of the dispenser bay
and snap into place.
Installation
To avoid electric shock, which can cause death or severe personal injury, disconnect the
refrig orator from electrical power before connecting a water supply line to the refrigerator.
To Avoid Property Damage:
- Copper tubing is recommended for the water supply line. Water supply tubing made of W' plastic is not
recommended since it greatly increases the potential for water leaks. Manufacturer will not be
responsible for any damage if plastic tubing is used for supply line.
• DO NOT install water supply tubing in areas where temperatures fall below freezing.
- C hemicals from a malfunctioning softener can damage the ice maker, if the ice maker is connected to soft
water, ensure that the softener is maintained and working properly.
IMPORTANT: Ensure that your water suDply line connections comply with all ocal plumbing codes.
Before Instafling The Water Supply Line, You Will Need
• Basic Tools: adjustable wrench, flat-blade screwdriver, and Phillips TM screwdriver
• Access to a household cold water line with water pressure between 30 and 100 psi.
• A water supply line made of 1Ainch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).
• A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type
shutoff valve.
• A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.
NOTE: waterline kit number 53o39i795o, available from your appliance deai0r at additional cost, contains 25 feet
(7:6 meters) of 1Ainch OD Copper tubing, a saddle type shutoff valve (nonpiercing), (2)1A inch brass compression
nuts, (2) ferrules/sleeves, and instructions for installing a water supply line.
- Connecting To Water Supply
To Connect Water Supply Line To Inlet Valve
1. Disconnect refrigerator from electric power source.
2. Place end of water supply line into sink or bucket. Turn ON water supply
and flush supply line until water is clear. Turn OFF water supply at shut
off valve.
3. Unscrew plastic cap from water valve inlet and discard cap.
4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,
as shown.
5. Push water supply line into water valve inlet as far as it will go (1Ainch).
Slide ferrule(sleeve) into valve inlet and finger tighten compression nut
onto valve. Tighten another half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to rear panel of
refrigerator as shown.
7. Coil excess water supply line (about 21/2turns) behind refrigerator as shown
and arrange coils so they do not vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any connections that
leak.
9. Reconnect refrigerator to electrical power source.
10. Toturn ice maker on, lower wire signal arm (see ice maker front cover for ON/
OFF position of arm).
IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may
cause ice maker tOcycle two or three t!mes before making a fu!! tray of ice. New plumbing may cause ice to be discolored
or have poor flavor. Discard ice made during the first 24 hours.
Cable
Block
Cove[
Top Hinge
Bottom
tPin
Center
Hinge
nge
Door Removal instructions
Tools Necessary:
3/8
Fixed
wrench
Phillips
3ha
FIef Head
Screw Dfive_
DOOR REMOVAL INSTRUCTIONS:
f your refrigerator will not fit through an entrance area. you can reduce its size by
"emoving the doors. Check first by measuring the entrance.
IMPORTANT: Before you begin, turn the refrigerator temperature control to "0" and
remove the electrical power cordfrom the wall outlet. Remove food from door shelves.
1 Disconnect electrical supply.
2 Remove toe grille (see page 4 to learn howl
To remove freezer door:
1 Remove top hinge cover and screws.
2 Trace around the hinge with a soft lead pencil. This makes reinstallation easier
3 Remove top hinge and lift door off bottom hinge pin.
4 Reverse this procedure to reinstall freezer door.
To remove refrigerator door:
1 Place wood block under door to support itsweight.
2 Unfasten the multi-wire cable bracket by removing itsscrew from the cabinet.
3 Detach the multi-wire cable connector located below the door.
Place your thumbs on flat sides of each connector, grasp firmly, and bend both
ends back and forth while pulling apart
NOTE: You may need to insert a flat screwdriver between the connector ends to
release the locking tab (see illustration).
4 Detach the water tube from the connector located below the door. The connector
releases when you press its outer sleeve inward.
NOTE: If refrigerator has been used. have a container ready to catch excess water
from tube.
5 Remove the bottom hinge screws and hinge, holding the door as its weight rests
on the wood block. Lay the door on its side to avoid damage to cable and tube.
6 Remove the center hinge screws and hinge. Ensure plastic washer stays on
hinge pin.
7. Reverse this procedure to reinstall refrigerator door. When both doors are
reinstalled, connect water line by inserting tube and pushing until mark touches
face of fitting Connect cable, replace toe grille, and plug in electrical power cord.
Connector
push until mark touches face of fitting
Loading...