Frigidaire PLHS267ZDB1, PLHS267ZDB0, PLHS239ZDB9, PLHS239ZDB6, PLHS239ZDB3 Owner’s Manual
...
WeJcome ....................... 2
Safety instruction .. .......... 3
installation -- _ncJ,de,Conoeot_,_
_ce Maker To Water Supply ............ 4 = 5
Door Removal
instructions ................... 6
Features at a Glance ......... 7
Temperature Controls ..... 8
Looking inside .......... 9 - 1t
Automatic ice and Water
Dispenser ................ 12 - t6
Food Storage
& Energy Saving Tips ....... 17
Normal Operatin_ Sounds.. t 8
Care & Cleaning ......... t9 - 20
Warranty ..................... 21
EspaSoi ........... 26
Before You Call
SolutioRs to
CommooProblem,.............. 22 o25
READ AND SAVE THESE INSTRUCTIONS PzN241572800(0304)
Congratulations on your purchase of a new refrigerator! We
here at F:lectroJux Home Products are very proud of our
product and we are completely committed to providing you
with the best service possible, Your satisfaction is our #1
priority,
Please read this Use & Care Manual very carefully, it contains
valuable information on how to properly maintain your new
refrigerator,
We know you'll enjoy your new refrigerator and ThankYou
for choosing our product, We hope you consider us for future
purchases,
PLEASE READ AND SAVE THESE INSTRUCTIONS
This Use & Care blanual provides specific operating
instructions for your model, Use your refrigerator only as
instructed in this manual, These instructions are not meant
to cover every possible condition and situation that may
occur, Common sense and caution must be practiced when
installing, operating and maintaining any appliance,
Questions?
1°800=944°9044
(United States)
1-866-213-9397
(Canada)
or visit our web site at www.frigidaire, corn
Extend Your Warranty Protection
With An
Extended Service Contract
CALL t-800-944-9044
To Enjoy These Benefits:
Please record your model and seriaJ numbers beJow for
future reference.This information is found on the serial
plate located inside the refrigerator compartment.
NOTE:Use
Model Number:
Serial Number:
Purchase Date:
only soar., and water to clean serial plate.
Total freedom from repair biims so
unexpected repairs won't upset your
budget.
Fast, convenient toil-free service is just
a phone call away.
Top-quality repairs by factory-trained
experts.
Quick access to genuine replacement
parts so you can rest assured your
refrigerator is repaired with the proper
components.
Please attach sales receipt
here for future reference.
Please complete and mail in the Product
Registration Card included with your
refrigerator.
FORYOURSAFETY
* Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance, Read
product labels for warnings regarding flammability and
other hazards,
* Do not operate the refrigerator in the presence of
explosive fumes,
, Avoid contact with any moving parts of automatic ice
maker,
* Remove all staples from the carton, Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture,
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after the refrigerator is
unpacked, Children should NEVER use these items to play
with, Cartons covered with rugs, bedspreads, plastic sheets
or stretch wrap may become airtight chambers, and can
quickly cause suffocation.
PROPER DmSPOSAL OF YOUR REFRmGERATOR
OR FREEZER
Risk of child entrapment
Child entrapment and suffocation
are not problems of the past,
Junked or abandoned refrigerators
or freezers are still dangerous -
even if they will sit for "just a few
days," if you are getting rid of your
old refrigerator or freezer, please
follow the instructions below to
Before you throw away your old refrigerator/freezer:
* Remove doors,
* Leave shelves in place so children may not easily climb
inside,
Have refrigerant removed by a qualified service
technician.
ELECTRmCAL mNFORMATION
* The refrigerator must be ptugged into its own
dedicated 115VoJt, 60 Hz., AC onty electric outJet.
The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
electrical shock hazards, it must be plugged directly
into a properly grounded three-prong receptacle, The
receptacle must be installed in accordance with local
codes and ordinances, Consult a qualified electrician,
Do not use an extension cord or adapter plug.
* if the power cord is damaged, itshould be replaced bythe
manufacturer, service technician or a qualified person to
prevent any risk,
* Never unplug the refrigerator by pulling on the power
cord, Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord,
* Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock,
* Performance may be affected if the voltage varies by
10% or more, Operating the refrigerator with insufficient
power can damage the compressor, Such damage is
not covered under your warranty,
* Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
IMPORTANT: Turning the Freezer and Fresh Food
Controls to "0" turns off the compressor and p[events
your refrigerator from cooling, but does not disconnect
the power to the light buib and other electrical
must unplug the power cord from the wall outlet.
#o not,under
any circumstances, I
cut, remove,
or bypass the /
grounding prongj
Powercord with
37pronggroundedplug
* Avoid connecting refrigerator to a Ground Fault interrupter
(GFI) circuit,
ThisOwner'sGuideprovidesspecificoperatinginstructions
foryourmodekUsetherefrigeratoronUyasinstructedinthis
Use&CareManuakBeforestartingtherefrigerator,follow
theseimportantfirststeps.
LOCATION
* Choose a pUacethat is near a grounded eUectricaUoutbt,
Do Not use an extension cord or an adapter pUug,
* if possiMe, pUacethe refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
SOUrces,
* The refrigerator must be installed on a floor that is bveU
and strong enough to support a fully baded refrigerator,
* Consider water suppUyavailability for modeb equipped
with an automatic ice maker.
mNSTALLATJON
the temperature will drop beJow 55°F (13°C) or rise
above tl O°F(430C). The compressor wiJJnot be aMe
to ma!ntain proper temperatures inside the
lowerfront of your refrigerator. Sufficient air circulation
!s essential for the proper operation of your
refrigerator.
Installation Clearances
* Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8"
Back 1"
DOOR OPENING
side against a wail, you may have to allow additional
space so the door can be opened wider,
To/rratall Toe Grille:
1, Open freezer and
fresh food
2, Line up toe grille at
making sure the four
bottom tabs are -_ /
resting through hobs --_
at base of cabinet,
3,
Starting from left side
of toe grille, press in on first top tab using your thumb
and push toe grille forward until it snaps in place, Continue
this process until all tabs aresnapped in place and toe
grille is secured to refrigerator,
LEVEUNG
Allfourcorners of your refrigeratormust restfirmlyona solidfloor,
Your refrigerator is equipped with adjustable front rollersto help
levelyou runit,Toensure proper doorseal and assistdoorclosing,
the refrigerator should be tilted1/4"(6 mm),front to back,
ToLevel Your Refrigerator:
1, Removetoe grille,(See '?-oRemove ToeGrille",)
2, Useflat-bladescrewdriver or 3/8" socketwrench to adjust
front rollers.
Cabinet
Your refrigerator should be positioned to allow easy access to
a counter when removing food, For best use of drawers and
freezer baskets, the refrigerator should be in a position where
both the refrigerator and freezer doors can be fully opened,
TOE GRILLE INSTALLATmON / REMOVAL
To Remove Toe Grille:
1. Open freezer and fresh food compartment doors,
2. Working from left side of toe grille, slip your fingers
between top of toe grille and cabinet. Gently pull
forward until first set of tabs are free. Slide your hand
down past the free tabs and pull forward again until the
second set of tabs are free. Continue this process until
all tabs are free and the toe grille can be removed. (See
graphic at top of page in right column.)
themselves within a 20 degree opening,
Raise
3, Check both doors to be sure seals touch cabinet on all four
sides,
iftstallatio - connecting Ice Maker To Water Supply
To avoid eJectric shock, which can cause death or severe personaJ injury, disconnect the refrigerator
from eJectricaJ power before connecting a water supply line to the refrigerator.
To Avoid Property Damage:
o Copper tubing is recommended for the water suppJy Jine.Water supply tubing made of ¼"" plastic is not
recommended since it greatly increases the potentiaJ for water leaks. Manufacturer will not be responsiMe
for any damage if plastic tubing is used for supply line.
o DO NOT install water supply tubing in areas where temperatures fai! beJowfreezing.
o ChemicaJs from a maffunctioning softener can damage the ice maker, if the ice maker is connected to soft
water, ensure that the softener is maintained and working properly.
IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes,
Before/nstafling The Water Supply Line, You Wifl Need
,, BasicTools: adjustable wrench, flat=blade screwdriver, and PhillipsTM screwdriver
o Access to a household cold water line with water pressure between 20 and 100 psi,
A water supply line made of ¼ inch (6,4 mm) OD, copper tubing, To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water
pipe, Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown),
A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type
shutoff valve.
A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.
To Connect Water Supply Line To Ice Maker Inlet Va/ve
1, Disconnect refrigerator from ebctric power source, _ F_U!Tub_
to Ice Maker
2, Place end of water supply line into sink or bucket, Turn ON water supply Brass
and flush supply line until water is clear. Turn OFF water supply at shut compression
off valve.
,Jut
3. Unscrew plastic cap from water valve inlet and discard cap.
4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,
as shown.
5. Push water supply line into water valve inlet as far as it wiii go (¼ inch).
Slide ferrule (sleeve) into valve inlet and finger tighten compression nut watervalve
onto valve. Tighten another half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to rear panel of inbt
refrigerator as shown.
7. Coil excess water supply line (about 2V2turns) behind refrigerator as shown
and arrange coils so they do not vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any connections that
leak. flora househald water supply
9, Reconnect refrigeratortoelectrical powersource, (!ncludeenoughtubinginlooptoallow
10. Make sure ice maker power switch is turned On (See page 13 for location of rr_ovin_ refr geratorouforcleaning.}
power switch),
cause !ce make[ to CYC!etwo or three times before making a full tray of ice. New plumbing may cause ice to be
discolored or have poor flavor. Discard ice made during the first 24 hours.
Top
Screw Cover Sc,ew
Hinge _///_iup H{ng_
TO DmSCONNECT
•Pressouter r gagal _tface
TO CONNECT n_ _,<
1SO_"t tube 8rid u_ _
oush until mark touches face of fitting
Screw
_emove JuDe
Door Removal Instructions
ToolsNecessar,
_/o
Fixed
wrencr,
Phi ED_ r_eoc_
DOOR REMOVAL mNSTRUCTIONS:
If it isnecessary to move the refrigerator through narrow doorways, fofow
these steps to remove the doors.
IMPORTANT: Before you begin, turn Freezerand Fresh Food controls
to "0" and remove electrical power cord from wall outlet. Remove any
food from door shelves.
1. Disconnect electrical supply.
2. Open both doors, then remove toe grille.
8. Close doors,
To Remove Refrigerator Door:
1 Remove top hinge cover screw on refrigerator door and remove cover,
2. Trace around hinge with soft lead pencil. This wiii make it easier to realign
doors when they are replaced.
3. Remove top hinge and lift refrigerator door off bottom hinge pin. Set door
aside
4. Remove bottom hinge, f necessary,
5. Reverse this procedure to reinstall refrigerator door
To Remove Freezer Door:
1. Disconnect water line coming from lower hinge of freezer door at connection
located under front of freezer: Press outer ring against face of fitting, then puii
to remove tube.
2. Remove top hinge cover screw on freezer door and remove cover.
3. Disconnect wiring harness connector plug at top hinge: place your thumbs on
flat sides of each connector and bend both parts back and forth then with
firm grasp, puii both pieces apart.
4. Trace around hinge with soft lead pencil. This wiii make it easier to realign
doors when they are replaced.
5. Remove top hinge, allowing wiring harness to pull through hinge and lift freezer
door off of bottom hinge pin.Lay door down fiat to avoidkinking water line.
6. Remove bottom hinge, f necessary.
7. Reverse this procedure to reinstall freezer door.
When both doors have been reinstalled, connect water line by inserting Iube and
push until mark touches face of fitting, replace toe grille and plug in electrical power
cord. Turn both temperature controls to center position, Adjust settings as necessary,
Tubin£t
Freezer and Refrigerator
Controme
SpiHProof TM
g Shemf
Door Bin
raceContainer
Pizza Shemf
Shelf
Small totems
Door Bin
Shemf
TimtOut
Door Bin
Small Basket
Large Basket
Door Bin
Large Basket
Dairy Door
Door Bin
Rack
Door Bin
Meat Keeper
and Cover
SpillProof TM
Fixed Shelf
Door Bin
Egg Tray
Speciam totem
Rack
Tall Bottme
Retainer
Snugger
Crisper Pan
and Cover
Door Bin
][Z31ZZ]D[Z][Z]D
Toe Grille
Features may vary according to mode#
Fixed
Door Bin
COOL DOWN PERmOD
To ensure safe food storage, allow the refrigerator to operate with the doors dosed for at Ueast8 to 12 hours before
Uoadingit with food,
REFRIGERATOR & FREEZER CONTROLS
TEMPERATURE ADJUSTMENT
• After 24 hours, adjust the controls as needed, Adjust
Fadory Setting Factory Setting
temperatures gradually: move the knob in small
increments, allowing the temperature to stabilize,
• For coUdertemperatures, turn the knob towards CoMer,
CoUd
|
o For warmer temperatures, turn the knob towards Cold,
To maintain temperatures, a fan circuUates air in the
Freezer ,o<.ot FreshFood
refrigerator and freezer compartments, For good circulation,
do not bUockcoUdair vents with food items,
Refrigerator & Freezer Controls
TEMPERATURE ADJUSTMENT GUIDE
If Fresh Food Compartment Is Too Warm Turn Fresh Food Control Slightly Towards Colder,
if Fresh Food Compartment is Too Cold Turn Fresh Food Control Slightly Towards Cold,
if Freezer Compartment is Too Warm Turn Freezer Control Slightly Towards Colder,
if Freezer Compartment is Too Cold Turn Freezer Control Slightly Towards Cold,
* To Turn Refrigerator Off Turn Freezer and Fresh Food Controls To O,
* iMPORTANT: Turning the Freezer and Fresh Food Controls to"0'! turns off the compressor and prevents your refrigerator
your refrigerator you must unplug the power cord from the wall outlet,
Loading...