Frigidaire PLGFZ390ECB, PLGFZ390ECA Owner’s Manual

Controls .......... 8-9
Setting Oven Controls ............. 11-24
Self Cleaning ........................... 25-27
General Care & Cleaning ....... 28-30
Before You Call
III,
nnl
I
Questions? 1-800-944-9044 (UnitedStates)
1-800-265-8352 (Canada)
Visit the Frigidaire Web Site at:
Warranty ......................... Back Page
http://www.frigidaire.com
READ AND SAVE THESE INSTRUCTIONS pin 316417111 (0505)
< 71 ./ ]
iii i _i i
Congratulations on your purchase of a newrange! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you
with the best service possible. Your satisfaction isour number one priority. We know you'll enjoy your new range and Thank You for choosing our product.
We hope you consider us for future purchases. PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS
This Use & Care Manual provides specific operating instructions for your model. Use your range only as instructed in this manual. These instructions are not
meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining
any appliance. Please record your model and serial numbers below for future reference.
Model Number: Serial Number:
Serial plate location -
Open the Warming Drawer (some models) or Storage Drawer (some models)•
Purchase Date: This Use & Care Manual contains general operating instructions for your
appliance and feature information for several models. Your range may not have all the described features. The graphics shown are representative. The graphics
on your range may not look exactly like those shown.
Product Registration
Be sure to register your product. The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to
Electrolux Home Products.
Grounding type wall receptacle
Do not, underany
circumstance, cut,
remove, orbypass
the grounding prong.
Powersupplycord cord must be plugged into an electrical outlet that is correctly polarized and properly
with 3-prong
groundingplug grounded. If a 2-prong wall receptacle is the only available outlet, it is the personal
See the INSTALLATION INSTRUCTIONS packaged with this range for complete installation and grounding instructions.
Grounding Instructions
Avoid fire hazard or electrical shock. Do not use an adapter plug, an
extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.
This appliance is equipped with a 3-prong grounding plug for your protection
against shock hazard and should be plugged directly into a properly grounded receptacle.
DO NOT cut or remove the grounding prong from this plug. For personal safety, the range must be properly grounded. For maximum safety, the power
responsibility of the consumer to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified electrician.
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
Personal injury or death from electrical
shock may occur if the range is not installed by a qualified installer or electrician.
_r_ Any additions, changes or conversions
required in order for this appliance to satisfactorily meet the application needs must be made by a qualified
technician.
@2005 Electrolux Home Products, Inc.
All rights reserved
The natural gas range is designed to allow for conversion to
Liquefied Petroleum (LP.) Gas.
If L.P. conversion is needed, contact your local appliance dealer for assistance. The L.P. Conversion Kit may be obtained from your appliance dealer and should be installed by a qualified service technician. Before installing the kit be sure to follow the LP. Installation Instructions carefully.
Read all instructions before using this appliance. Save these instructions for future reference.
This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
Important Safety Instructions
This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.
This symbol will help alert you to situations that may cause bodily injury or property damage.
If the information in this manual is not
followed exactly, a fire or explosion may result causing property damage, personal injury or death.
FORYOURSAFETY:
-- Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other appliance.
-- WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use
any phone in your building.
Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's instructions.
If you cannot reach your gas supplier, call the fire department.
-- Installation and service must be performed by a
qualified installer, servicer or the gas supplier.
Remove all tape and packaging before using the range.
Destroy the carton and plastic bags after unpacking the range. Never allow children to play with packaging material.
Proper Installation--Be sure your appliance is properly installed and grounded by a qualified technician in
accordance with the National Fuel Gas Code ANSI Z223.- latest edition, or in Canada CAN/CGA B149.1, and CAN/CGA
B149.2, and the the National Electrical Code ANSI/NFPA No.70-1atest edition, or in Canada CSA Standard C22.1,
Canadian Electrical Code, Part 1, and local code requirements. Install only per installation instructions provided in the literature package for this range.
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power
to the range at the circuit breaker or fuse box in case of an emergency.
User servicing--Do not repair or replace any part of the appliance unless specifically recommended in the manuals.
All other servicing should be done only by a qualified technician, This may reduce the risk of personal injury and damage to the range.
Never modify or alter the construction of a range by removing leveling legs, panels, wire covers, anti-tip brackets/screws, or any other part of the product.
Stepping, leaning or sitting on the doors
or drawers of this range can result in serious injuries and also cause damage to the range. Do not allow children to climb or play around the range. The weight of a child on an open door may cause the range to tip, resulting in serious burns or other injury.
f
F!,vivl,_l;1_11_,[€
All ranges can tip.
Injury to persons could result.
Install anti-tip device packed with range.
See Installation Instructions. _'!,VlVl;1;l#ll#[tlTo reduce the risk of
tipping, the rangemust be secured by
properly installed anti-tip bracket provided
with the range. To check ifthe bracket is
installed properly, visually check that rear leveling leg is inserted into and fully
secured by the anti-tip bracket by
removing lower panel or storage drawer. For models with a warmer drawer, grasp
the top rear edge of the range and carefully attempt to tilt it forward. Refer to the installation instructionsfor proper anti-
tip bracket installation.
r!xV_,l_,1;t_ll_[HiDo not use the oven or warmer drawer
(if equipped) for storage.
Do not store items of interest to children
in the cabinets above a range or on the backguard of a
range. Children climbing on the range to reach items could be seriously injured.
Never Use Your Appliance for Warming
or Heating the Room.
Storage in or on Appliance--Flammable materials should not be stored in an oven, warmer drawer, near surface
burners or in the storage drawer. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the range.
Do Not Leave Children Alone--Children should not be left alone or unattended in the area where appliance is in use.
They should never be allowed to sit or stand on any part of the appliance.
DO NOTTOUCH SURFACE BURNERS, AREAS NEARTHESE BURNERS, OVEN BURNERS ORINTERIORSURFACES OFTHE
OVEN. Both surface and oven burners may be hot even though flames are not visible. Areas near surface burners may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among
these areas are the cook top, surfaces facing the cook top, the oven vent openings and surfaces near these openings, oven
door and window.
Do Not Leave Children Alone--Children should not be left
alone or unattended in the area where appliance is in use.
They should never be allowed to sit or stand on any part of the appliance.
DO NOTTOUCH SURFACE BURNERS, AREAS NEARTHESE BURNERS, OVEN BURNERS OR INTERIOR SURFACES OF THE
OVEN. Both surface and oven burners may be hot even though flames are not visible. Areas near surface burners may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among these areas are the cook top, surfaces facing the cook top, the
oven vent openings and surfaces near these openings, oven door and window.
Wear Proper Apparel--Loose-fitting or hanging garments should never be worn while using the appliance. Do not let
clothing or other flammable materials contact hot surfaces.
Do Not Use Water or Flour on Grease Fires--Smother the fire with a pan lid, or use baking soda, a dry chemical or
foam-type extinguisher.
When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot.
Use Only Dry Potholders--Moist or damp potholders on hot surfaces may result in burns from steam, Do not let potholders touch hot heating burners. Do not use a towel or other bulky cloth instead of a potholder.
Do Not Heat Unopened Food Containers--Buildup of pressure may cause container to burst and result in injury.
Remove the oven door from any unused range if it is to be stored or discarded.
IMPORTANT--ELECTRIC IGNITION MODELS ON LY: Do not attempt to operate the oven during a power failure. If the power
fails, always turn off the oven. If the oven is not turned off and
the power resumes, the oven will begin to operate again. Once
the power resumes, reset the clock and oven function.
IMPORTANT INSTRUCTIONS FOR USING
YOUR COOKTOP
Use Proper Flame Size--Adjust flame size so
it does not extend beyond the edge of the utensil. The use of
undersized utensils will expose a portion of the burner flame to direct contact and may result in ignition of clothing. Proper
relationship of utensil to flame will also improve efficiency.
Know which knob controls each surface burner. Place a pan of food on the burner before turning it on, and turn the
burner off before removing the pan.
Always turn knob to the full LITE position when igniting top burners. Visually check that burner has lit. Then adjust the flame
so it does not extend beyond the edge of the utensil.
Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Burners--To reduce the risk of burns, ignition
of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the utensil should be positioned so
that it is turned inward, and does not extend over adjacent surface burners.
Never Leave Surface Burners Unattended at High Heat Settings--Boilovers cause smoking and greasy spillovers that may ignite, or a pan that has boiled dry may melt.
Protective Liners--Do not use aluminum foil to line surface burner pans, or oven bottom, except as suggested in this
manual, improper installation of these liners may result in risk of electric shock, or fire.
Glazed Cooking Utensils--Only certain types of glass, glass/ ceramic, ceramic, earthenware, or other glazed utensils are suitable for cooktop service without breaking due to the
sudden change in temperature. Check the manufacturer's recommendations for cooktop use.
IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN
Use Care When Opening Oven Door or Warmer Drawer-- Stand to the side of the range when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven.
Keep Oven Vent Ducts Unobstructed. The oven vent is located below the backguard. Touching the surfaces in this
area when the oven is operating may cause severe burns.
Also, do not place plastic or heat-sensitive items on or near the oven vent. These items could melt or ignite.
Placement of Oven Racks. Always place oven racks in desired location while oven is cool. If rack must be moved
while oven is hot use extreme caution. Use potholders and
grasp the rack with both hands to reposition. Do not let potholders contact the hot heating elements in the oven. Remove all utensils from the rack before moving.
Do not use the broiler pan without its insert. The broiler pan and its insert allow dripping fat to drain and be kept away from the high heat of the broiler.
Do not cover the broiler insert with aluminum foil. Exposed
fat and grease could ignite.
Cold temperatures can damage the electronic control. When using the appliance for the first time, or when the appliance has not been used for an extended period of time, be certain the unit has been in temperatures above 32°F (0°C) for at
least 3 hours before turning on the power to the appliance.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR RANGE
Clean the range regularly to keep all parts free of grease that could catch fire. Pay particular attention to the area underneath each surface element. Do not allow grease to
accumulate. Refer to the range manufacturer's instructions for cleaning.
Kitchen cleaners and aerosols--Always follow the manufacturer's recommended directions for use. Be aware
that excess residue from cleaners and aerosols may ignite causing damage and injury.
SELF CLEANING OVENS
Clean in the self-cleaning cycle only the parts listed in this Owner's Guide. Before self cleaning the oven, remove the
broiler pan and any utensils or foods from the oven.
Do Not Use Oven Cleaners--No commercial oven cleaner or oven liner protective coating of any kind should be used in or
around any part of the oven.
Do Not Clean Door Gasket--The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential
exposure to such substances.
Your Gas Range Features Include:
1. Electronic Oven Control with Kitchen Timer.
2. Warming Drawer Control & Indicator Light (some models).
3. Left Front Burner Valve & Knob.
4. Left Rear Burner Valve & Knob.
5. Center Burner Valve & Knob (some models).
6. Right Rear Burner Valve & Knob.
7. Right Front Burner Valve & Knob.
8. Easy to clean Deep Well style cooktop.
9. Dishwasher safe Burner Grates (styles & colors vary by model).
10. Dishwasher safe Center Burner Grate (some models)
11. Self-Clean Oven Door Latch.
12. Automatic Oven Door Light Switch (some models).
13. Oven Interior Light with Shield.
14. Self-Cleaning Oven interior.
15. Adjustable Oven Rack(s).
16. Convection Fan & Cover.
17. Large 1 piece Oven Door Handle.
18. Full width Oven Door (styles vary with model).
19. Warming Drawer & Handle (some models) or Storage Drawer with integrated handle (some models).
20. 5,000 BTU Simmer Burner (some models).
21. 9,500 BTU Burner (some models).
22. 12,000 BTU Power Plus Burner (some models).
23. 14,000 BTU Power Plus Burner (some models).
24. 16,000 BTU Power Plus Burner (some models).
25. 9,500 BTU Center Burner (some models).
26. Broil Pan (some models).
27. Broil Pan Insert (some models).
28. Roasting Rack.
29. Leveling Legs & Anti-tip Bracket (included). Burner Drip pans (some models).
o
...._ ,
NOTE: The features of your range may vary according to model type & color.
Before Settin g 0 ven Con trois
OVEN VENT
Oven Vent Location
The oven vent is located below the backguard (See Fig. 1). When the oven is
on, warm air is released through this vent. This venting is necessary for proper air circulation in the oven and good baking results. DO NOT BLOCK THE VENT.
Removing & Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front of rack and slide out.
Fig. 1
To replace, fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.
Oven Racks
Your range is equipped with one or more Flat Oven Rack(s). Place the rack(s) into the positions shown in Fig. 2. Refer to the following
Recommended Rack Positions for Broiling, Baking & Roasting for complete information.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
Recommended Rack Positions for Broiling, Baking & Roasting: Food Rack Position
Broiling hamburgers &steaks See Broil section Broiling meats, chicken or fish See Broil section
Cookies, cakes, pies, biscuits & muffins 2 or 3
Frozen pies, angel food cake, yeast, bread, casseroles,
small cuts of meat or poultry Turkey, roast or ham 1 or Roasting Shelf
OvenRack
Fig. 2
Baking Layer Cakes with 1 or 2 Oven Racks
Fig. 3
For best results when baking cakes using 2 oven racks, place cookware on rack positions 1 & 4 (See Figs. 3 & 4). For best results when using a single oven Flat Rack, place cookware on rack position 2 or 3 (See Figs. 3 & 5).
Air Circulation in the Oven
For best air circulation and baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides or back of the oven cavity. The hot air must be able to circulate around the pans
and cookware in the oven for even heat to reach around the food.
Fig. 4 Fig. 5
Do not place plastic
items such as salt and pepper shakers, spoon holders or plastic
wrappings on top of the range when
it is in use. These items could melt or
ignite. Potholders, towels orwood spoons could catch fire if placed too
close to a flame.
In the event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match to the burner head, then slowly turn the surface control knob to LITE. After burner lights push in and turn knob to desired setting. Use caution
when lighting surface burners manually.
OFF ..LITE..hi 6 5 4 3 2 Io
CORRECT
Setting Surface Controls
Your range may be equipped with different sized surface burners. The ability to heat food quicker and in larger volumes increases as the burner size increases.
The SIMMER burner (some models) is best used for simmering delicate food items such as sauces, etc.
The standard burners can be used for most surface cooking needs. Some models include a standard sized center burner (or 5th burner).
The POWER PLUS burner or burners (some models) are best used for bringing large quantities of liquid to temperature and when preparing larger quantities of
food. Regardless of size, always select cookware that is suitable for the amount and
type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan.
Operating the Gas Surface Burners:
1. Place cooking utensil on surface burner.
2. Push the surface control knob in and turn counterclockwise out of the OFF position.
3. Release the knob and rotate to the LITE position. Note: All four electronic surface ignitors will spark at the same time. However, only the burner you are turning on will ignite.
3. Visually check that the burner has lit.
4. Push the control knob in and turn counterclockwise to the desired flame size. The control knobs do not have to be set at a particular setting. Use
the guides and adjust the flame as needed. DO NOT cook with the surface control knob in the LITE position. (The electronic ignitor will continue to spark if the knob is left in the LtTE position.)
Setting Proper Surface Burner Flame Size
For most cooking, start on the highest control setting and then turn toa lower one to complete the process. Use the recommendations below as a guide for
determining proper flame size for various types of cooking. The size and type of utensil used and the amount of food being cooked will influence the setting needed for cooking.
W
Never extend the flame beyond the outer] edge ofthe utensil. A higher flame simply/
wastes heat and energy, and increases/
your risk of being burned by the flame. J
*These settings are based on using medium-weight metal or aluminum pans with lids. Settings may vary when using other types of pans. The color ofthe flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a well-lighted room. Each cone of flame should be steady and sharp. Adjust or clean burner if flame is yellow-orange.
*Flame Size
High Flame Medium Flame
Low Flame
For deep fat frying, use a thermometer and adjust the surface control knob accordingly, tfthe fat is too cool, the food will absorb the fat and be greasy, tf the fat is too hot, the food will brown so quickly that the center will be undercooked. Do not attempt to deep fat fry too much food at once as the food will neither brown nor cook properly.
Type of Cooking Start most foods; bring water to a boil; pan broiling. Maintain a slow boil; thicken sauces, gravies; steaming. Keep foods cooking; poach; stewing.
Setting Warming Drawer ControIs
Arranging Warming Drawer Rack Positions
The rack can be used in 2 ways:
In the upright position to allow low profile food items to be placed both under and on top of the rack (for example, rolls or biscuits on top of the rack and a casserole dish underneath).
In the downward position to allow you to place light weight food items and empty cookware (for example, rolls or pastries and dinner plates) on the
rack.
Always use pot holders or
oven mitts when removing food from the Warming Drawer as cookware and plates
will be hot and you can be burned.
Set the Warming Drawer rack in either position as shown below (Fig. 1).
Drawer _¢arming Drawer
Rack in upward _ Rack in downward
position position
Fig. 1
To Operate the Warming Drawer
The purpose of the Warming Drawer is to keep hot cooked foods at serving temperature. Always start with hot food. It is not recommended to heat cold
food in the Warming Drawer. All food placed in the Warming Drawer should be covered with a lid or aluminum
foil to maintain quality. Do not use plastic wrap to cover food. Plastic may
melt onto the drawer and be very difficult to clean. Use only utensils and cookware recommended for oven use in the Warming Drawer.
To Set the Warming Drawer Control
The control is used to select the temperature ofthe Warming Drawer. It is located on the control panel. To set the control, push in and turn the knob to
the desired setting. The temperatures are approximate, and are designated by HI (high), MED (medium) and LO (low). To set the Warming Drawer control:
1. Turn the knob to select the desired temperature setting.
2. For best results, preheat the drawer before adding food. An empty drawer will preheat in approximately 15 minutes.
3. When done, turn the control to OFF.
Warming Drawer Temperature Selection
Recommended Warming Drawer food settings are shown in Fig. 3. lfa particular food is not listed, start with the MED setting. If more crispness is desired, remove the lid or aluminum foil from the food. Most foods can be kept at serving temperatures on the MED setting. When a combination of foods are to be kept warm (for example, a meat with 2 vegetables and rolls) use the HI setting. To avoid heat loss, do not open the Warming Drawer while in use.
Warming Drawer Indicator Light
The Warming Drawer indicator light is located above the Warming Drawer control knob (See Fig. 2). It turns on when the control is set, and stays on until the control is turned off. The Warming Drawer will not operate during the Self-Clean cycle.
OFF
Warming Drawer Recommended
Food Settings Table
Food Item Setting
Bacon HI Hamburger Patties HI
Poultry HI Pork Chops HI
Fried Foods HI
Pizza HI Gravies MED Casseroles MED
Eggs MED
Roasts (Beef, Pork, Lamb) MED Vegetables MED
Biscuits MED
Rolls, hard MED
Pastries MED
Rolls (soft) LO
Empty Dinner Plates LO
Fig. 3
Left Glide
h
Push down with finger
Fig. 1
Setting Warming Drawer Controls
Removing & Replacing the Warming Orawer
Pull up with finger
serious injury or death. Disconnect appliance from electric power
"_i, I _ Electrical Shock Hazard can occur and result in
To Remove and Replace the Warming Drawer (some models)
To Remove the Warming Drawer:
I. _ Turn poweroffbefore removingthe Warming Drawer.
2. Open the drawer to the fully opened position.
3. Locate glide lever on each side of drawer, pull up on the left glide lever and push down on the right glide lever (See Fig.1 ).
4. Pull the drawer away from the range.
To Replace the Warming Drawer:
1. Pull the bearing glides to the front of the chassis glide (See Fig. 2).
2. Align the glide on each side of the drawer with the glide slots on the range.
3. Push the drawer into the range until levers "click" (approximately 2"). Pull the drawer open again to seat bearing glides into position. If you do not
hear the levers "click" or the bearing glides do not feel seated remove the drawer and repeat steps 1 thru 3. This will minimize
before cleaning and servicing the Warming Drawer.
Fig. 2
possible damage to the bearing glides.
NOTE: The Warming Drawerwili NOT operate while in the self.clean and oven Lockout modesl
Control Pad Features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide.
OVEN
LIGHT--Use
to turn the
SPEEDCLEAN--Use oven light ON to select a 2 hour Self- and OFF
Cleaning cycle (See (See page page 27). 25).
BAKE TIME-- Useto_ X
TIMERON/ BROIL--Use BAKE--Use to OFF-- Use to to select enter the set or cancel variable Broil normal Bake the Kitchen feature (See feature. Timer (See page 19). (See page16). page 13).
enter the length of the _ _'XEven-C0_
page 27). _ Clean time
START TIME Use with
BAKE, BAKE TIME, and / Maxx Clock CLEAN PADS to "'/ clean
program a Delayed Timed Bake or Delay
Self-Cleaning cycle. /
MAXX CLEAN -_ Use to select a 4 LOCK
hour Self-Cleaning
cycle (See page 27).
CLOCK
CONTROLS CONVERT BAKE-- Use to enable Use to Use to
or disable select the select the
Use to most oven set the time of
day (See
features (See Convert page 14).
/
/
CONV
Convection
feature (See feature feature (See 23).
page 22). (See page page 21).
page 12).
Timer
0n/0ff
I I
Start Broil Bake Keep time warm
Lock convert bake roast
Controls
/
Cony Cony Cony
/
/
/
/ /
CONV
Convection Convection Bake Roast
29).
CONV ROAST--
Use to select the
KEEPWARM-- Use to select the Keep Warm feature 0 THRU 9 (See page 25). NUMBERPADS--
Use to enter temperature and
times.
1 2 3
4 5 6
7 8 9
Clear 0
setti_g /0ff
Favorite e
/ \\ '\
FAVORITE CLEAR/OFF START SETTING- Use to cancel Use to
Use recall any oven mode start all stored previously oven
recipes entered except features (See page the Oven (not used
Lockout, Time of with Oven Day & Minute Light).
Timer. Press CLEAR/OFFto
stop cooking.
Minimum & Maximum Control Pad Settings
All of the features listed have
minimum and maximum time or temperature settings that may be
entered into the control. An ENTRY acceptance beep will sound each
time a control pad is touched (the Oven Lockout pad is delayed by 3 seconds).
An ENTRY ERROR tone (3short
beeps) will sound if the entry of the temperature or time is below the
minimum or above the maximum settings for the feature.
FEATURE PREHEATTEMP. BAKE TEMP. BROIL TEMP. KITCHENTIMER
CLOCKTIME
COOKTIME
STARTTIME
CLEAN TIME CONVECTION BAKE
12Hr. 24 Hr. 12Hr. 24 Hr. 12Hr. 24 Hr. 12Hr. 24 Hr.
10
MIN. TEMP./TIME
170°F/77°C 170°F / 77°C
400 °F/ 205°C
0:01 Min. 0:01 Min.
1:00 Hr./Min. 0:00 Hr./Min. 0:01 Min. 0:01 Min.
1:00 Hr./Min. 0:00 Hr./Min. 2 hours 325 °F / 163°C
MAX. TEMP./TIME
550°F /288°C 550°F /288°C 550°F /288°C
11:59 Hr./Min. 11:59 Hr./Min. 12:59 Hr./Min.
23:59 Hr./Min.
11:59 Hr./Min.
23:59 Hr./Min.
12:59 Hr./Min. 23:59 Hr./Min. 4 hours 550°F /288°C
Loading...
+ 22 hidden pages