Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those
shown. This doesn't change the way it operates. Also Push buttons or pads may be shaped differently.
Oven Light—
Use to turn the
oven light ON
and OFF.
Speed Clean
— Use to
select a 2
hour SelfCleaning
cycle.
Clean—
Use to
select a 3
hour SelfCleaning
cycle.
Maxx Clean—
Use to select a
4 hour SelfCleaning cycle.
Bake Time— Use
to enter the length
of the baking time.
Timer ON/
OFF— Use to
set or cancel the
minute timer.
Even-Cook
Convection Oven
Speed
clean
Clean
Maxx
clean
Oven
light
Bake
time
Clock
Lock Controls— Use
to enable or disable
all oven features.
Clock— Use
to set the
time of day.
Start Time— Use with
Bake, Bake Time and
Clean Pads to program a
Delayed Timed Bake or
Delay Self-Cleaning cycle.
DELAY
Timer
On/Off
Start
time
3
Lock
Controls
TIMED
LOCKED
DOOR
Bake
Conv
convert
Conv Convert— Use to
select the Convection
Convert feature.
Bake—Use to select the
normal baking feature.
TIMER
CLEAN
Conv
bake
Conv Bake —Used to
select the convection
bake feature.
Broil
CONV
BAKE
ROAST
WARM
Keep
warm
Conv
roast
Conv Roast— Use to
select the Convection
Roast feature.
Broil— Use to
select variable
Broil feature.
BROIL
PROBE
Favorite
setting
Favoite Setting—
Use to recall
stored recipes.
Keep Warm — Use
to select the Keep
Warm feature.
0 Thru 9 number
pads—Use to enter
temperature and times.
123
456
987
Clear
/Off
0
Clear/Off or Lock Controls Use to cancel any oven mode
previously entered except the
Time of Day & Minute Timer.
Push Clear/Off to stop
cooking. Also used to control
the Oven Lockout feature.
START
Start— Use
to start all
oven
features
(not used
with Oven
Light).
Minimum & Maximum Control Pad Settings
All the features listed have minimum and maximum time or temperature settings that may be entered into the control. An
ENTRY acceptance beep will sound each time a control pad is touched (the Oven Lockout pad is delayed by 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the
time in the display will flash (See Figure 1).
To set the clock (example below for 1:30)
pad is used to set the clock. The clock may be set for 12 or 24 hour time of day
INSTRUCTIONSPRESSDISPLAY
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
Figure 1
CONV
ROAST
BAKE
WARM
BROIL
PROBE
1. Press
Clock
. "CLO" will appear in the display (Figure 2).
2. Press 1 3 0 pads to set the time of day to 1:30 (Figure 3).
"CLO" will stay in the display. Press
START
. "CLO" will disappear
and the clock will start (Figure 4).
Changing between 12 or 24 hour time of day display
1. Press and hold
"12h" (Figure 5) or "24h" (Figure 6) will appear in the display and
the control will beep once.
2. Press
Clean
display. The display will show either "12h" (Figure 5) or "24h"
(Figure 6).
3. Press
START
change.
4. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen, the
clock will now display time from 0:00 through 23:59 hours.
Clock
for 7 seconds (Figure 3). After 7 seconds,
to switch between the 12 and 24 hour time of day
to accept the change or press
Clear
to reject the
/Off
Clock
3
1
START
Clock
for 7 seconds
Clean
START
or
Clear
/Off
DELAY
0
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 2
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 3
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 4
Figure 5
Figure 6
2
Setting the Clock (continued)
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER ON/OFF
Timer
and CLEAN
On/Off
Clean
pads control the Continuous Bake or 12 Hour Energy Saving features.
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven
control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for
Continuous Baking.
INSTRUCTIONSPRESSDISPLAY
To set the control for Continuous Bake or 12 Hour
Energy Saving features
1. Press and hold
"12h" or "- -h" will appear in the display and the control will
beep once.
2. Press
Clean
continuous bake features. Note: "12h" (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving
mode and "- -h" indicates the control is set for the Continuous
Bake feature (Figure 3).
3. Press
START
to time of day) or press
Timer
for 7 seconds (Figure1). After 7 seconds
On/Off
to switch between the 12 Hour Energy Saving and
to accept the change (Figure 4; display will return
Clear
to reject the change.
/Off
Timer
for 7
On/Off
seconds
Clean
START
Clear
/Off
TIMED
DOOR
TIMED
DOOR
TIMED
DOOR
TIMED
DOOR
DELAY
LOCKED
DELAY
LOCKED
DELAY
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 1
TIMER
CLEAN
Figure 2
TIMER
CLEAN
Figure 3
TIMER
CLEAN
CONV
ROAST
CONV
ROAST
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BAKE
WARM
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
Figure 4
Setting Timer
The TIMER ON/OFF
beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the
other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.
Timer
pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will
On/Off
INSTRUCTIONSPRESSDISPLAY
To set the Timer (example for 5 minutes)
1. Press
Timer
. "- - - -" will appear and "TIMER" will flash in the
On/Off
display (Figure 5).
2. Press the number pads to set the desired time in the display
(example 5). Press
START
. The time will begin to count
down with "5:00" and "TIMER" will stay in the display (Figure
6). Note: If
START
is not pressed the timer will return to the
time of day after 25 seconds.
3. When the set time has run out, "End" and "TIMER" will show in
the display (Figure 7). The clock will sound with 3 beeps every
5 seconds until
Timer
is pressed.
On/Off
Timer
On/Off
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 5
START
5
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 6
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 7
Timer
On/Off
To cancel the Kitchen Timer before the set time has run out
Press
Timer
. The display will return to the time of day.
On/Off
Timer
On/Off
3
Consumer Defined Controls
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.
Setting Oven Lockout Feature
3
Lock
The
prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
To activate the Oven Lockout feature
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
Controls
INSTRUCTIONSPRESSDISPLAY
3
1. Press and hold
Lock
for 3 seconds.
Controls
2. After 3 seconds a beep will sound, "LOC" will appear and
3
Lock
for 3 seconds
Controls
TIMED
DOOR
DELAY
TIMER
LOCKED
CLEAN
Figure 1-A
CONV
ROAST
BAKE
WARM
"DOOR LOCKED" will flash in the display (If you have a range
see figure 1-A; if it's a wall oven see figure 1-B). Once the oven
door is locked the "DOOR LOCKED" indicator will stop
flashing.
To reactivate normal oven operation:
3
1. Press and hold
will disappear. The "DOOR LOCKED" will flash in the display
until the oven door has completely unlocked (Figure 2).
Lock
for 3 seconds. A beep will sound. "LOC"
Controls
3
Lock
for 3 seconds
Controls
TIMED
DOOR
TIMED
DOOR
DELAY
TIMER
LOCKED
CLEAN
Figure 1-B
DELAY
TIMER
LOCKED
CLEAN
Figure 2
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
2. The oven is again fully operational.
Setting Silent Control Operation
The START TIME
Start
and CLEAN
time
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can
be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
Clean
pads control the Silent Control operation feature. The Silent Control operation
INSTRUCTIONSPRESSDISPLAY
To change control from normal sound operation to
silent control operation
DELAY
1. To tell if your range is set for normal or silent operation press
and hold
Start
for 7 seconds. "- - - -" will appear and "DELAY"
time
will flash in the display (Figure 3). After 7 seconds "SP" will
appear in the display (Figure 4).
2. Press
Clean
to switch between normal sound operation and
silent operation mode. The display will show either "SP"
(Figure 4) or "--" (Figure 5).
If "SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If "- -" appears (Figure 5), the control is in
the silent operation mode.
3. Press
START
to accept the change or press
Clear
to reject the
/Off
Start
for 7 seconds
time
Clean
START
or
Clear
/Off
TIMED
DOOR
TIMED
DOOR
TIMED
DOOR
LOCKED
DELAY
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 3
TIMER
CLEAN
Figure 4
TIMER
CLEAN
Figure 5
CONV
ROAST
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
change.
Note: The control will always beep at the end of a kitchen timer
and will beep when a set temperature has been reached, even if
the control is set to silent operation.
4
Consumer Defined Controls (continued)
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Setting Temperature Display — Fahrenheit or Celsius
The BROIL
Broil
and CLEAN
Clean
pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory
to display in Fahrenheit.
INSTRUCTIONSPRESSDISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press
Clean
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press
START
to accept the change or press
Clear
to reject the
/Off
change.
Broil
Broil
for 7 seconds
Clean
or
Clear
/Off
START
TIMED
TIMED
DOOR
DOOR
TIMED
DOOR
DELAY
DELAY
LOCKED
LOCKED
DELAY
LOCKED
TIMER
TIMER
CLEAN
CLEAN
Figure 1
TIMER
CLEAN
Figure 2
Figure 3
CONV
CONV
ROAST
ROAST
CONV
ROAST
BAKE
BAKE
WARM
WARM
BAKE
WARM
BROIL
BROIL
PROBE
PROBE
BROIL
PROBE
5
Setting Oven Controls (continued)
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Setting Bake
The BAKE
Bake
pad controls normal baking. The oven can be programmed to bake at any temperature from 170° F
to 550° F (The sample shown below is for 375°F).
INSTRUCTIONSPRESSDISPLAY
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
Bake
2. Press
display (Figure 1). If a bake of 350°F is needed, press
, "350°" will appear and "BAKE" will flash in the
START
.
3. Press 3 7 5 (Figure 2). "BAKE" will continue to flash and
"375°" will appear in the display.
4. Press
START
. The display will show "375°" and "BAKE" (Figure 3).
A beep will sound once the oven temperature reaches 375° F.
Pressing
Clear
will cancel the Bake feature at any time.
/Off
To change the Bake Temperature (example: changing
from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F and the
3
Bake
7
START
Clear
/Off
Figure 1
5
Figure 2
DELAY
TIMED
DOOR
TIMED
DOOR
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 3
TIMER
CLEAN
Figure 4
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
oven temperature needs to be changed to 425°F, press
Bake
(Figure 4). "375°" will appear and "BAKE" will flash in the
display.
2. Press 4 2 5 (Figure 5). "BAKE" will continue to flash and
"425°" will appear in the display.
3. Press
START
. "BAKE" and "425°" will stay in the display (Figure 6).
Note: If the oven was recently heated from prior cooking and has
remained heated, the bake element symbol may not show in the
display immediately.
Note: Electric models only, during the first rise of temperature, the
Bake and Broil elements will cycle for a better heat distribution.
4
Bake
2
START
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 5
5
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
Figure 6
CONV
ROAST
BAKE
WARM
BROIL
PROBE
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.