Frigidaire PHT219HSM5, PHT219HSM4, PHT219HSM3, PHT219HKM5, PHT219HKM4 Owner’s Manual

...

r..4=5

...... 6=9

Controls ....... 10

Looking inside .......... 11 =12

ice Service .............. 13

Food Storage

& Energy Saving Tips ....... 14

Normal Operating Sounds.. 15

Care & Cleaning ......... 16 - 17

_iiiiiiii¸i'i,iiiiii¸ii¸I¸iiiiil¸i¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii¸I¸iiiiiiii_

Warranty ...................... 18

Before You Call ............... 19

READ AND SAVE THESE INSTRUCTIONS PIN241813800(Jan 2007)

Congratulations on your purchase of a new refrigerator! We here at Electrolux Home Products, Inc, are very proud of our product and we are completely committed to providing you with the best service possible. Your satisfaction is our #1 priority.

Please read this Use & Care Manual very carefully. It contains valuable information on how to properly maintain your new refrigerator.

We know you'll enjoy your new refrigerator and Thank You for choosing our product. We hope you consider us for future purchases.

PLEASE READ AND SAVE THESE INSTRUCTIONS This Use & Care Manual provides specific operating instructions

for your model. Use your refrigerator only as instructed in this manual. These instructions are not meant to cover every possible

condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.

Please record your model and serial numbers below for future reference, This information is found on the serial

plate located inside the refrigerator compartment.

Got Questions?

Need Parts or Service?

Before Calling Your

Local Repair Service -

CALL:

Electrolux

Solutions Hotline

(United States)

1-800-944-9044

(Canada)

Model Number:

1-800-668-4606

Serial Number:

Purchase Date:

Please complete and mail in the Product

Registration Card included with your refrigerator.

Extend Your Warranty Protection With An Extended Service Contract

CALL 1-800=944-9044 To Enjoy These Benefits:

- Total freedom from repair bills so unexpected repairs won't upset your budget.

- Fast, convenient toll=free service is just a phone call away.

Resolve many service issues over the phone at your convenience!

If we cant resolve your service issue,

we'll schedule a reputable local service technician for you!

Order Guenine Electrolux Parts &

Accessories

Purchase Extended Warranty Protection

• Top=quality repairs by factory-trained experts.

- Quick access to genuine replacement parts so you can rest assured your refrigerator is

repaired with the proper components,

FORYOUR SAFETY

,, Do not store or use gasoline, or other flammable liquids

in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other

hazards.

,, Do not operate the refrigerator in the presense of

explosive fumes.

,, Avoid contact with any moving parts of automatic ice

maker.

,, Remove all staples from the carton. Staples can cause

severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.

CHILD SAFETY

Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the refrigerator is unpacked. Children should NEVER use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly

cause suffocation.

PROPER DISPOSAL OFYOUR REFRIGERATOR OR FREEZER

Risk of child entrapment Child entrapment and Y_

suffocation are not problems of the past. Junked or abondoned

refrigerators or freezers are still dangerous - even if they will sit for "just a few days." If you are getting rid of your old refrigerator

or freezer, please follow the instructions below to help prevent accidents.

Before you throw away your old refrigerator/freezer:

,, Remove doors.

Leave shelves in place so children may not easily climb inside.

Have refrigerant removed by a qualified service technician.

any circumstances

ELECTRICAL iNFORMATiON , The refrigerator must be plugged into its own dedicated

115 Volt, 60 Nz., AC only electric outlet. The power cord

of the appliance is equipped with a three-prong grounding

plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three- prong receptacle. The receptacle must be installed in

accordance with Iocalcodes and ordinances. Consult a qualified electrician. Do not use an extension cord or

adapter plug.

,, If the power cord is damaged, it should be replaced by the

manufacturer, service technician or a qualified person to prevent any risk.

, Never unplug the refrigerator by pulling on the power

cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord.

,, Unplug the refrigerator before cleaning and before

replacing a light bulb to avoid electrical shock.

,, Performance may be affected if the voltage varies by 10%

or more. Operating the refrigerator with insufficient power can damage the compressor. Such damage is not covered

under your warranty.

,, Do not plug the unit into an outlet controlled by a wall

switch or pull cord to prevent the refrigerator from being turned off accidentally.

,, Avoid connecting refrigerator to a Ground Fault Interruptor

(GFI) circuit.

This Use & Care Manual provides specific operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Manual. Before starting the

refrigerator, follow these important first steps.

LOCATION

, Choose a place that is near a grounded electrical outlet.

Do Not use an extension cord or an adapter plug.

, If possible, place the refrigerator out of direct sunlight

and away from the range, dishwasher or other heat sources.

o The refrigerator must be installed on a floor that is level

and strong enough to support a fully loaded refrigerator.

o Consider water supply availability for models equipped

with an automatic ice maker.

INSTALLATION

DOOR OPENING

Your refrigerator should be positioned to allow easy access to a counter when removing food. To make this possible, the direction in which the doors open can be reversed. See Door

Removal & Reversal Instructions.

LEVELING

All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator is equipped with adjustable front rollers or front leveling screws to help level your unit.

To LevelYour Refrigerator:

1. Removetoegri,e.

2. U;s3/_!a:-obIc_dts Cerewd rt_er adjust front rollers. Use

adjustable wrench to adjust leveling screws.

Installation Clearances ,, Allow the following clearances for ease of installation,

proper air circulation, and plumbing and electrical connections:

Sides & Top 3/8" Back 1"

Raise

Adjustable Front Roller

(some models)

Raise

Stationary Front Roller

with Leveling Screw

(some models)

To Connect Water Supply LineTo ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON

water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve.

3. Unscrew plastic cap from water valve inlet and discard

cap.

4. Slide brass compression nut, then ferrule (sleeve) onto

water supply line, as shown.

5. Push water supply line into water valve inlet as far as it

will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another

half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to

rear panel of refrigerator as shown.

7. Coil excess water supply line (about 2V2 turns) behind

refrigerator as shown and arrange coils so they do not

vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any

connections that leak.

9. Reconnect refrigerator to electrical power source.

10. To turn ice maker on, lower wire signal arm (see ice

maker front cover for ON/OFF position of arm).

Before Instaling TheWater Supply Line,You Will Need

,, Basic Tools: adjustable wrench, flat-blade screwdriver,

and Phillips TM screwdriver

,, Access to a household cold water line with water pressure

between 30 and 100 psi.

, A water supply line made of ¼ inch (6.4 ram) OD, copper

tubing. To determine the length of copper tubing needed, you will need to measure the distance from the ice maker

inlet valve at the back of the refrigerator to your cold water pipe. Then acid approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

,, A shutoff valve to connect the water supply line to your

household water system. DO NOT use a self-piercing type

shutoff valve.

,, A compression nut and ferrule (sleeve) for connecting the

water supply line to the ice maker inlet valve.

Plastic Water Tubing Clamp

to Ice Maker

\1_--- Fill Tu Brass

_ / u// Compression

i!_ _ Steel

u -- Nut

4 _ Ferrule

. i

///

::L],,,."-°

pp ' e

_in loop to allow

moving refrigerator out for cleaning.)

from household water supply

Top Hinge

= o

_\__'-\ _ Top Hinge

Door Stop

Screw _

Washer

7"-. Screws

$ i_

Washer

Hinge

-Pin

, Hinge

Awl

Sockot Adjustable

Wrench Set Wrench

DOOR REMOVAL AND REVERSAL iNSTRUCTIONS:

1. Remove toe grille.

2. Remove top hinge cover. Trace around the hinge with a soft lead pencil. This makes reinstallation easier. Remove top hinge and lift door off center

hinge pin. Set door aside.

3. Unscrew center hinge pin using adjustable wrench and save for reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge and shim to slide out. Tighten screws.

6. Loosen two outside screws on opposite side of refrigerator, remove inside

screw and install center hinge.

7. Remove two screws on bottom hinge with 3/8" socket wrench.

8. Install bottom hinge on opposite side with the two screws removed from

step 7.

9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole in hinge and tighten with adjustable wrench.

10. Reverse door handles (see instructions on next page).

11. Move freezer and refrigerator door stops to opposite side. Before starting

screws, use an awl to puncture the foam.

12. Position refrigerator door onto bottom hinge pin and screw center hinge pin

through center hinge into top of door. Close refrigerator door to help align

hinge hole.

13. Tighten center hinge pin with adjustable wrench.

14. Remove cabinet and hinge hole plugs and move to opposite side.

15. Lower freezer door onto center hinge pin.

16. Close freezer door. Have an assistant lift up on opposite side of door while

tightening screws to install top hinge.

17. Replace toe grille.

18. Plug in electrical power cord and turn refrigerator temperature control to

center position. Adjust setting as necessary.

+ 13 hidden pages