Frigidaire PHSC39EESS3, PHSC39EESS1, PHSC239DSB7, PHSC239DSB5, GHSC39ETEW3 Owner’s Manual

...

Side by Side

WeMcome ....................... 2

SafetyI_structions ....... ::... 3

Installation -- _,om,dosco,,eot_g

lee Maker To Water Supply ............ 4 - 5

Door Removal

instructions ................... 6

Features at a GUance ......... 7

Temperature Controls .... 8 =9

Looking inside .......... 10 = 12

Automatic ice and Water

Dispenser ................ 13 = 17

Food Storage

& Ener : Savin,-Ti _s ....... 18

NormaU O_ Sounds.. 19

Care & Cleaning ......... 20 = 21

Warranty ..................... 22 ;_

EspaSol ........... 27

READ AND SAVE THESE INSTRUCTIONS p!N241540301(0704)

Before You Call

Solutions to

co,_,_onProbme=s.............. 23 - 26

Congratulations on your purchase of a new refrigerator! We here at F:lectroJux Home Products are very proud of our product and we are completely committed to providing you with the best service possible, Your satisfaction is our #1 priority,

Please readthis Use & Care Manual very carefully, it contains valuable information on how to properly maintain your new refrigerator,

We know you'll enjoy your new refrigerator and ThankYou for choosing our product, We hope you consider us for future purchases,

PLEASE READ AND SAVE THESE INSTRUCTIONS This Use & Care blanual provides specific operating

instructions for your model, Use your refrigerator only as instructed in this manual, These instructions are not meant

to cover every possible condition and situation that may occur, Common sense and caution must be practiced when installing, operating and maintaining any appliance,

Questions?

1°800=944°9044

(United States)

1-866-213-9397

(Canada)

or visitour web site at www.frigidaire, corn

Extend Your Warranty Protection

With An

Extended Service Contract

CALL t-800-944-9044

To Enjoy These Benefits:

Please record your model and seriaJ numbers beJow for

future reference.This information is found on the serial

plate located inside the refrigerator compartment.

NOTE:Use

Model Number: Serial Number: Purchase Date:

only soar.,and water to clean serial plate.

_QO

Total freedom from repair biims so

unexpected repairs won't upset your budget.

Fast, convenient toil-free service is just a phone call away.

Top-quality repairs by factory-trained

experts. Quick access to genuine replacement

parts so you can rest assured your refrigerator is repaired with the proper

components.

Please attach sales receipt

here for future reference.

Please complete and maia in the Product Registration Card included with your refrigerator.

FORYOURSAFETY

* Do not store or use gasoline, or other flammable liquids

in the vicinity of this or any other appliance, Read product labels for warnings regarding flammability and

other hazards,

* Do not operate the refrigerator in the presence of

explosive fumes,

, Avoid contact with any moving parts of automatic ice

maker,

* Remove all staples from the carton, Staples can cause

severe cuts, and also destroy finishes if they come in contact with other appliances or furniture,

CHILD SAFETY Destroy or recycle the carton, plastic bags, and any exterior

wrapping material immediately after the refrigerator is unpacked, Children should NEVER use these items to play with, Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.

PROPER DmSPOSAL OF YOUR REFRmGERATOR OR FREEZER

Risk of child entrapment

Child entrapment and suffocation are not problems of the past, Junked orabandoned refrigerators or freezers are still dangerous - even if they will sit for "just a few days," if you are getting rid of your old refrigerator or freezer, please

follow the instructions below to

Before you throw away your old refrigerator/freezer:

* Remove doors, * Leave shelves in place so children may not easily climb

inside, Have refrigerant removed by a qualified service

technician,

ELECTRmCAL mNFORMATION * The refrigerator must be ptugged into its own

dedicated 115VoJt, 60 Hz., AC onty electric outJet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards, it must be plugged directly into a properly grounded three-prong receptacle, The receptacle must be installed in accordance with local codes and ordinances, Consult aqualified electrician, Do not use an extension cord or adapter plug.

* if thepower cord isdamaged, itshould be replaced bythe

manufacturer, service technician or a qualified person to prevent any risk,

* Never unplug the refrigerator by pulling on the power

cord, Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord,

* Unplug the refrigerator before cleaning and before

replacing a light bulb to avoid electrical shock,

* Performance may be affected if the voltage varies by

10% or more, Operating the refrigerator with insufficient power can damage the compressor, Such damage is not covered under your warranty,

* Do not plug the unit into an outlet controlled by a wall

switch or pull cord to prevent the refrigerator from being

IMPORTANT; Pressing the On/Off button on the control pane! (atthe top of the fresh food compartment)

not disconnect power to lights and other electrical

must unplug the power cord from the wall outlet,

#o not,under

any circumstances, I cut, remove, or bypass the

grounding prong_

Powercord with

37pronggrounded plug

* Avoid connecting refrigerator to a Ground Fault interrupter

(GFI) circuit,

ThisOwner'sGuideprovidesspecificoperatinginstructions foryourmodekUsetherefrigeratoronUyasinstructedinthis

Use&CareManuakBeforestartingtherefrigerator,follow

theseimportantfirststeps.

LOCATION

* Choose a pUacethat is near agrounded eUectricaUoutbt,

Do Not use an extension cord or an adapter pUug,

* if possiMe, pUacethe refrigerator out of direct sunlight

and away from the range, dishwasher or other heat

SOUrces,

* The refrigerator must be installed on a floor that is bveU

and strong enough to support a fully baded refrigerator,

* Consider water suppUyavailability for modeb equipped

with an automatic ice maker.

mNSTALLATJON

the temperature will drop beJow 55°F (13°C) or rise above tl O°F(430C). The compressor wiJJnot be aMe

to ma!ntain proper temperatures inside the

lowerfront of your refrigerator. Sufficient air circulation

!s essential for the proper operation of your

refrigerator.

Installation Clearances

* Allow the following clearances for ease of installation,

proper air circulation, and plumbing and electrical

connections:

Sides &Top 3/8" Back 1"

DOOR OPENING

side against a wail, you may have to allow additional space so the door can be opened wider,

To/rratall Toe Grille:

1, Open freezer and

fresh food

2, Line up toe grille at

making sure the four bottom tabs are -_ /

resting through hobs --_

at base of cabinet,

Starting from left side of toe grille, press in on first top tab using your thumb and push toe grille forward until it snaps in place, Continue this process until all tabs aresnapped in place and toe grille issecured to refrigerator,

LEVEUNG Allfourcorners ofyour refrigeratormust restfirmlyonasolidfloor,

Your refrigerator is equipped with adjustable front rollersto help levelyou runit,Toensure proper doorseal and assistdoor closing, the refrigerator should be tilted 1/4"(6 mm),frontto back,

ToLevel Your Refrigerator:

1, Removetoe grille,(See '?-oRemove ToeGrille",) 2, Useflat-blade screwdriver or 3/8" socket wrench to adjust

front rollers.

Cabinet

Your refrigerator should be positioned to allow easy access to a counter when removing food, For best use of drawers and freezer baskets, the refrigerator should beina position where

both the refrigerator and freezer doors can be fully opened,

TOE GRILLE INSTALLATmON / REMOVAL

To Remove Toe Grille:

1. Open freezer and fresh food compartment doors,

2. Working from left side of toe grille, slip your fingers between top of toe grille and cabinet. Gently pull forward until first set of tabs are free. Slide your hand down past the free tabs and pull forward again until the second set of tabs are free. Continue this process until all tabs are free and the toe grille can be removed. (See graphic at top of page in right column.)

themselves within a 20 degree opening,

Raise

3, Check both doors to be sure seals touch cabinet on all four

sides,

iftstallatio - connecting Ice Maker To Water Supply

To avoid eJectric shock, which can cause death or severe personaJ injury,disconnect the refrigerator

from eJectricaJ power before connecting a water supply line to the refrigerator.

To Avoid Property Damage:

o Copper tubing is recommended for the water suppJy Jine.Water supply tubing made of ¼"" plastic is not

recommended since it greatly increases the potentiaJ for water leaks. Manufacturer will not be responsiMe for any damage if plastic tubing is used for supply line.

o DO NOT install water supply tubing in areas where temperatures fai! beJowfreezing. o ChemicaJs from a maffunctioning softener can damage the ice maker, if the ice maker is connected to soft

water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes,

Before/nstafling The Water Supply Line, You Wifl Need ,, BasicTools: adjustable wrench, flat=blade screwdriver, and Phillips TM screwdriver o Access to a household cold water line with water pressure between 20 and 100 psi,

A water supply line made of ¼ inch (6,4 mm) OD, copper tubing, To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe, Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown),

A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

To Connect Water Supply Line To Ice Maker Inlet Va/ve

1, Disconnect refrigerator from ebctric power source, _ F_U!Tub_

to Ice Maker

2, Place end of water supply line into sink or bucket, Turn ON water supply Brass

and flush supply line until water is clear. Turn OFF water supply at shut compression off valve.

,Jut

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,

as shown.

5. Push water supply line into water valve inlet as far as it wiii go (¼ inch).

Slide ferrule (sleeve) into valve inlet and finger tighten compression nut watervalve onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of inbt

refrigerator as shown.

7. Coil excess water supply line (about 2V2turns) behind refrigerator as shown

and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that

leak. flora househald water supply

9, Reconnect refrigeratortoelectrical powersource, (!ncludeenoughtubinginlooptoallow

10. Make sure ice maker power switch is turned On (See page 14for location of rr_ovin_ refr geratorouforcleaning.}

power switch),

cause !ce make[ to CYC!etwo or three times before making a full tray of ice. New plumbing may cause ice to be

discolored or have poor flavor. Discard ice made during the first 24 hours.

Hinge

SCt'eW5/_

2 Pull to remove tube

TO CONNECT

Hinge Assembly

Door Removal Instructions

Fools Necessar i

3/8" Fixed Wrench

Phi iD! ]eaa

DOOR REMOVAL INSTRUCTIONS:

flit is necessary to move the refrigerator through narrow doorways, follow these steps to remove the doors.

iMPORTANT: Before you begin, remove ebcl rical power cord from wall outlet, Remove any food from door shelves,

1. Disconnect electrical supply,

2, 0 pen both doors, then remove toe grille isee page 4 to ieam how), 3, Close doors,

To Remove Refrigerator Door:

1, Remove top hinge cover screw on refrigerator door and remove cover,

2. Trace around hinge with soft lead pencil, This will make it easier to realign doors when they are replaced

3 Remove top hinge and lift refrigerator door off bottom hinge pin, Set door

aside,

4, Remove bottom hinge, if necessary, 5, Reverse this procedure to reinstall refrigerator door,

To Remove Freezer Door:

1. Disconnect water line coming from lower hinge of freezer door at connection located under front of freezer: Press outer ring against face of fitting, then pull

to remove tube,

2. Remove top hinge cover screw on freezer door and remove cover,

3. Disconnect wiring harness connector plug at top hinge: place your thumbs on fiat sides of each connector and bend both parts back and forth, then with firm grasp, puii both pieces apad

4. Trace around hinge with soft lead pencil, This wiii make it easier to realign doors when they are replaced

5. Remove top hinge,allowing wiring harness to pull through hinge and lift freezer door off of bottom hinge pin, Laydoor down fiatto avoid kinking water line,

6, Remove bottom hinge, if necessary, 7, Reverse this procedure to reinstall freezer door,

When both doors have been reinstalled, connect water fine by inserting tube and pushing until mark touches face of fitting, replace toe grille and plug in electrical powercord.

Assembly

Water

Hamf

Compartment

Rack

Large

Fixed

Door Bin

Fixed

Door Bin

Fixed

Rack Meat Keeper

Cover

Bottle

Retainer

_rBin

and Cover

Door Bin

Toe Grille

Features may vary according to model

COOL DOWN PERmOD To ensure safe food storage, allow the refrigerator to operate with the doors closed for at bast 6 hours before loading it

with food, REFRIGERATOR & FREEZER CONTROLS

NOTE: When changing control settings, wait 24 hou[s before making additional adjustments,

TemperatureControl Range

Warmer

Factory _etting MidPoint 0°

Colder

coldest :6 °

Temperature Adjustment Guide

If Fresh Eo0d Compartment iStoo _a[rn

If Fresh FoOd €omPar[ment iS too c0id

If Freezer Compartment is t00 warm

if Freezer Compartment is too Cold

Freezer FreshFood

Fahrenheit Centigrade Fahrenheit Centigrade

Adjust Fresh Food control one degree colder by pressing Down Arrow button.

Adjust Fresh Food control one degree warmer by pressing the Up Arrow button.

Adjust Freezer control one degree colder

by pressing Down Arrow button.

Adjust Freezer control one degree warmer

by pressing the Up Arrow button.

TEMPERATURE ADJUSTMENT After 24 hours, adjust the controb as

needed, Make your adjustments small and gradual; allowing time for temperatures to change and stabilize, Refer to the adjacent guidelines for temperature settings,

To adjust the temperature to a higher or

lower setting, press the Up or Down button closest to the display, The first time you

press the button, the display shows the last setting you entered, Each press of the

button after that increments the setting by one degree,

The display shows your new setting

momentarily, then changes back to the

iF TEMPERATURE DISPLAYS

FLASH...

ff ever you see both temperature displays continously flashing, it may indicate that the control system has detetcted a

performance problem. Call your Frigidaire service representative, who can interpret the flashing message.

To maintain temperatures, a fan qrculates air in the refrigerator and freezer compartments. For good drculation, do not

block cold air vents with food items.

+ 18 hidden pages