Frigidaire KG7 User Manual

22/04/11

A40

Furnaces

Philco KG7 Series Gas Furnace Features & Benefits

• Category IV Venting System: May be vertically or horizontally vented using either a non-direct vent (1 pipe) or direct
vent (2 pipe) system

• 100% fired and tested: All units and each component are tested on the manufacturing line

• Low boy height: Easy to apply in low ceiling applications, work well with taller high SEER coils

• Best packaging in the industry: Unique corner post design assure product will arrive to the homeowner dent free

• Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat

exchanger assures long life

• 30 second blower delay at start-up: Assures a warm duct temperature at furnace start-up. Adjustable blower settings
(60, 90, 120 and 180 seconds)

• 30 second post purge: Increases life of heat exchanger

• Hot surface igniter: Innovative application of an appliance igniter. Utilizes proven Smartlite® technology

• Color coded wire harness: Designed to fit the components, all with quick connect fittings for ease of service

• High static blowers: All models equipped with high static blowers

• 90 second fixed cooling cycle blower off delay (TDR): Increases cooling performance when matched with a coil

• LP convertible: Simple burner orifice and regulator spring change for easy of convertibility

• Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2

lights in combination to indicate all other fault codes

• Integrated control board: Incorporates connections for electronic air clear and humidifier

• Two piece door design: Enhances furnace appearance and uses captured screw to prevent loosing door screws

• Sealed vestibule: Reduces burner and inducer sound levels

• Extended flush jacket: Jacket provides an "appliance appearance"

• CSA certified design

• 115V, 60Hz. Gas connections are 1/2" NPT

C & L are Energy Star rated

WARRANTY ON PHILCO FURNACES

Warranty Details:

1 Year Comfort Quality Pledge:

Davies Supply Group Ltd.

Warranty Registration:

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

Lifetime Heat Exchanger and 10 years on all parts when product is
registered, 1 year Heat Exchanger and 1 year parts when not registered

Replacement of the entire unit if Heat Exchanger fails within the first year
of operation to the original owner

Register your system within 60 days of installation

[phone] [phone] [phone]

22/04/11

92+ AFUE Single Stage Gas Furnace (High Efficiency)

• High efficiency blower kit maximize efficiencies

• Multi-speed direct drive blower designed to give a wide range of cooling capacities.

Switches on PCB, provides ultra easy motor speed selection.

Input Btuh HP -Speed-Type-FLA R410 Coil Model Number Part Number

Upflow / Horizontal

38,000 1/3 - 4 - PSC - 4.80

54,000 1/2 - 4 - PSC - 8.20

72.,000 1/2 - 4 - PSC - 8.20

72,000 1/2 - 4 - PSC - 7.50

90,000 1.0 - 4 - PSC - 13.75

108,000 1.0 - 4 - PSC - 13.75

120,000 1.0 - 4 - PSC - 13.75

54,000 1/2 - 4 - PSC - 8.20

72.,000 1/2 - 4 - PSC - 8.20

90,000 1.0 - 4 - PSC - 7.50

120,000 1.0 - 4 - PSC - 13.75

C6BAX24(C,U)A
C6BAX30(C,U)A

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

Downflow

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

KG7SC038D23A

KG7SC054D24B

KG7SC072D24B

KG7SC072D35C

KG7SC090D35C

KG7SC108D45D

KG7SC120D45D

KG7SL054D24B

KG7SL072D24B

KG7SL090D35C

KG7SL120D45D

A40-1

Furnaces

904639K

904640K

904641K

904642K

904643K

904644K

904645K

904651K

904652K

904653K

904654K

R410 Coil:
(C=Cased, U=Uncased)

PVC & CPVC Fittings

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

22/04/11

95+ AFUE Two Stage Gas Furnace (High Efficiency)

• Energy efficient brushless DC (ECM) motor

• Control board has connections for twinning

Input Btuh HP -Speed-Type-FLA R410 Coil Model Number Part Number

Fixed Speed Upflow / Horizontal

C6BAX24(C,U)B

60,000 1/2 - FS - BLDC - 6.2

80,000 3/4 - FS - BLDC - 8.7

100,000 3/4 - FS - BLDC - 8.7

120,000 1.0 - FS - BLDC - 11.7

60,000 1/2 - FS - BLDC - 6.2

80,000 3/4 - FS - BLDC - 8.7

100,000 3/4 - FS - BLDC - 8.7

120,000 1.0 - FS - BLDC - 11.7

C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

Fixed Speed Downflow

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

KG7TC060D24B

KG7TC080D35C

KG7TC100D35C

KG7TC120D45D

KG7TL060D24B

KG7TL080D35C

KG7TL100D35C

KG7TL120D45D

A40-2

Furnaces

904727K

904728K

904729K

904730K

904731K

904732K

904733K

904734K

R410 Coil:
(C=Cased, U=Uncased)

PVC & CPVC Fittings

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

22/02/13

A41

Furnaces

Frigidaire FG7 Series Gas Furnace Features & Benefits

• Category IV Venting System: May be vertically or horizontally vented using either a non-direct vent (1 pipe) or direct
vent (2 pipe) system

• 100% fired and tested: All units and each component are tested on the manufacturing line

• Low boy height: Easy to apply in low ceiling applications, work well with taller high SEER coils

• Best packaging in the industry: Unique corner post design assure product will arrive to the homeowner dent free

• Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat

exchanger assure a long life

• 30 second blower delay at start-up: Assures a warm duct temperature at furnace start-up. Adjustable blower settings
(60, 90, 120 and 180 seconds)

• 30 second post purge: Increases life of heat exchanger

• Hot surface igniter: Innovative application of a silicon nitride igniter. Utilizes proven Smartlite® technology

• Color coded wire harness: Designed to fit the components, all with quick connect fittings for ease of service

• High static blowers: All models equipped with high static blowers

• 90 second fixed cooling cycle blower off delay (TDR): Increases cooling performance when matched with a coil

• LP convertible: Simple burner orifice and regulator spring change for easy of convertibility

• Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2

lights in combination to indicate all other fault codes

• Integrated control board: Incorporates connections for electronic air clear and humidifier

• Two piece door design: Enhances furnace appearance and uses captured screw to prevent loosing door screws

• Blower compartment: Sealed door to reduce air leakage and insulated for ultra quiet operation

• Sealed vestibule: Reduces burner and inducer sound levels

• Rounded corner jacket: Provides an "appliance appearance"

• CSA certified design

• 115V, 60Hz. Gas connections are 1/2" NPT

10 Year Comfort Quality Pledge:

Extended Warranty Protection:

Davies Supply Group Ltd.

Warranty Registration:

C & L are Energy Star rated

WARRANTY ON FRIGIDAIRE FURNACES

Warranty Details:

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

Lifetime Heat Exchanger and 10 years on all parts when product is
registered, 20 years Heat Exchanger and 5 year parts when not registered

Replacement of the entire unit if Heat Exchanger fails within the first 10
years when registered, 1 year when not registered

Register your system within 60 days of installation

Ask your Davies Rep for specific details on labor protection plans

22/04/11

92+ AFUE Single Stage Gas Furnace (High Efficiency)

• Multi-speed direct drive blower designed to give a wide range of cooling capacities

• Switches on PCB, provide ultra easy motor speed selection

Input Btuh HP -Speed-Type-FLA R410 Coil Model Number Part Number

Upflow / Horizontal

38,000 1/3 - 4 - PSC - 4.80

54,000 1/2 - 4 - PSC - 8.20

72,000 1/2 - 4 - PSC - 8.20

72,000 1/2 - 4 - PSC - 7.50

90,000 1.0 - 4 - PSC - 13.75

108,000 1.0 - 4 - PSC - 13.75

120,000 1.0 - 4 - PSC - 13.75

54,000 1/2 - 4 - PSC - 8.20

72,000 1/2 - 4 - PSC - 8.20

90,000 1.0 - 4 - PSC - 7.50

120,000 1.0 - 4 - PSC - 13.75

C6BAX24(C,U)A
C6BAX30(C,U)A

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

Downflow

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7SC038D23A

FG7SC054D24B

FG7SC072D24B

FG7SC072D35C

FG7SC090D35C

FG7SC108D45D

FG7SC120D45D

FG7SL054D24B

FG7SL072D24B

FG7SL090D35C

FG7SL120D45D

A42

Furnaces

904639F

904640F

904641F

904642F

904643F

904644F

904645F

904651F

904652F

904653F

904654F

PVC & CPVC Fittings

Davies Supply Group Ltd.

R410 Coil:
(C=Cased, U=Uncased)

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

22/04/11

95+ AFUE Two Stage Gas Furnace (High Efficiency)

• iSEER energy efficient brushless DC (ECM) motor gives up to 1 SEER point
efficiency gain in cooling

• Two stage inducer optimizes efficiency on first stage heat and reduces sound levels

Input Btuh HP -Speed-Type-FLA R410 Coil Model Number Part Number

Fixed Speed Upflow / Horizontal

C6BAX24(C,U)B

60,000 1/2 - FS - BLDC - 6.2

80,000 3/4 - FS - BLDC - 8.7

100,000 3/4 - FS - BLDC - 8.7

120,000 1.0 - FS - BLDC - 11.7

Variable Speed Upflow / Horizontal

60,000 1/2 - VS - 6.2

80,000 3/4 - VS - 8.7

100,000 3/4 - VS - 8.7

120,000 1.0 - VS - 11.7

C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7TC060D24B

FG7TC080D35C

FG7TC100D35C

FG7TC120D45D

FG7TC060DVB

FG7TC080DVC

FG7TC0100DVC

FG7TC120DVD

A43

Furnaces

904727F

904728F

904729F

904730F

904735F

904736F

904737F

904738F

PVC & CPVC Fittings

Davies Supply Group Ltd.

R410 Coil:
(C=Cased, U=Uncased)

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

22/04/11

97+ AFUE iQ Drive® Modulating Gas Furnace (Ultra High Efficiency)

• iQ Drive® Modulating Heating Operation Includes:

- Modulating gas valve from 100% to 50% input in 5% increments

- Time proportioning modulation down to 15%

- Variable speed inducer and blower

• iQ Drive® thermostat provides modulation down to 15% and is required for furnace
operation

• iSEER energy efficient brushless DC (ECM) motor gives up to 1 SEER point
efficiency gain in cooling

Input Btuh HP -Speed-FLA R410 Coil Model Number Part Number

Fully Modulating, Variable Speed Upflow / Horizontal

C6BAX24(C,U)B

60,000 1/2 - Variable - 6.2

80,000 3/4 - Variable - 8.7

100,000 3/4 - Variable - 8.7

120,000 1.0 - Variable - 11.7

C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7MQ060DVB

FG7MQ080DVC

FG7MQ100DVC

FG7MQ120DVD

A44

Furnaces

904743F

904744F

904745F

904746F

R410 Coil:
(C=Cased, U=Uncased)

iQ Drive® Controller & Accessories

• Customizable programming options for every day, weekdays, weekends or individ­ual days

• On-board diagnostics alert when service or maintenance is needed

• Smart recovery gradually adjusts indoor temperatures for greater comfort

• Senses humidity and has a dehumidification mode that removes moisture quickly

• Communicates to various components within the iQ Drive® System and serves as

the main controller for an iQ Zone® System

• Auto changeover automatically switches the thermostat from heating to cooling

• No batteries required, settings are stored internally in the event of a power failure

• Two color backlight for easy viewing

IMPORTANT:

The iQ Drive® Furnace

• Energy saving features are customizable (temperature setbacks, heat pump/electric
heat or furnace changeover)

must be controlled by the
iQ Drive® Controller.

iQ Drive® Controller - Complete System Monitor & Controller

This Controller requires
18-22 gauge stranded
wire with a grounded

2 Pair, 4 Conductor, 22 AWG Stranded (7x30) TC Conductors, 300V RMS 60ºC

shield when connecting
to furnace.

PVC & CPVC Fittings

Description Part Number

Accessories

Individually Shielded Wire, 30m (100')

Optional Outdoor Sensor

920621F

B8723

920938

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

31/12/10

Floor Registers - Plastic

• Sleek modern look with rounded corners and blades

• Durable plastic construction, will not rust

• Smooth, quiet damper adjustment for desired level of air flow

• Easy to install, maintenance free

Description Part Number

3"x10" Register - White

3"x10" Register - Taupe

3"x10" Register - Brown

4"x10" Register - White Deflecto

4"x10" Register - Taupe Deflecto

4"x10" Register - Brown Deflecto

Horizontal Conversion Kit for Frigidaire "G6" Gas Furnaces

• For converting a 90+ upflow residential gas furnace to a horizontal
left or horizontal right position

Kit Includes Brand Part Number

Installation Instructions (#707796)
1/2" barbed fitting (#663841)
2" to 1/2" PVC reducer bushing (#663840)
2" PVC tee (#663115)
Tube, drain hard "J" - 5" x 2" (#663763)
Tube, soft - 10" (#663764)
Tube, soft - 50" (#663765)
Tube, high temp, grey - 17.5" (#263965)
Vinyl cap - 5/8" (#663723)
Vinyl cap - 1/2" (#663684)
Hose clamps (2) - 7/8" dia. (#668914)
Reducer - 3" to 2" (#663692)

Furnaces

Brand

Deflecto

Deflecto

Deflecto

Frigidaire

A45

RF31003B

RF31028B

RF31036B

RF41003B

RF41028B

RF41036B

903568

Horizontal installation suspended in attic or crawl space

Filter Rack

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

Davies Supply Group Ltd.

[phone] [phone] [phone]

• Comes with door

Filter Size Part Number

16" x 25" x 1"

20" x 25" x 1"

FR16251

FR20251

15/02/13

LP Gas Conversion Kits

A45-1

Furnace Accessories

For G6 & L1 Series Furnaces

• Designed for Canadian installations. To convert a natural gas
furnace to LP/Propane gas for altitudes between 0 to 4,500
feet above sea level, the main gas orifice must be replaced.
For higher altitudes (between 2,000 & 4,500 feet above seal
level) the input must be de-rated by 10%. This can be done
by simply reducing the manifold pressure without changing
the gas orifices.

• Use on standard & slow opening models only

• Not for use with step regulator valves

Application Brand

For use with G6 & L1 series gas furnaces using a

Honeywell Gas Valve

Frigidaire

For G7 Series Furnaces

• Designed for Canadian installations to convert a natural gas
furnace to LP/Propane gas. Used for altitudes between 0 to
4,500 feet above sea level

• For altitudes between 0 and 1,999 feet, only the orifice needs
to be changed. For altitudes between 2,000 and 4,500 feet,
both the orifice and the regulator pressure need to be
changed.

Application Brand

For use with G7 series gas furnaces using a

Honeywell Gas Valve

Frigidaire

Part

Number

904091A

Part

Number

904915

Davies Supply Group Ltd.

For G7MQ Modulating Furnaces

Application Brand

For use with G7MQ series gas furnaces Frigidaire

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

Part

Number

904950

15/02/13

A45-2

Furnaces

This Page Left

Intentionally

Blank

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

14/12/12

Flue Gas Venting System - System 636™ PVC

• Type BH Class IIA Vent: For use with gas fired appliances producing flue gases of 65oC or less

• Complete system fully certified to ULC S636

• White pipe with unique blue certification markings made to SCH 40 dimensions

A45-3

Furnaces

Description Case Part Number

2" Flue Gas Venting System

2" Concentric Vent Termination Kit (no vent screen) 3

2" Wall Termination Kit (no vent screen) 1

2" x 10' Pipe (Straight End) 10

2" Coupling (HubxHub) 70

o

Elbow (HubxHub) 110

2" 45

o

2" 90

Street Elbow (SPxHub) 60

o

Long Elbow (HubxHub) 55

2" 90

o

2" 90

Extra Long Elbow (HubxHub) 40

2" Sanitary Tee (HubxHubxHub) 35

3" Flue Gas Venting System

3" Concentric Vent Termination Kit (no vent screen) 3

3" Wall Termination Kit (no vent screen) 1

3" x 10' Pipe (Straight End) 10

3" Coupling (HubxHub) 60

o

3" 45

Elbow (HubxHub) 25

o

Street Elbow (SPxHub) 15

3" 90

o

3" 90

Long Elbow (HubxHub) 23

o

Extra Long Elbow (HubxHub) 15

3" 90

3" Sanitary Tee (HubxHubxHub) 17

Adapters & Other Components

3" x 2" Increaser Coupling (HubxHub) 45

3" x 2" Reducer Tee (HubxHubxHub) 10

2" x 1 1/2" Reducer Bushing (SPxHub)

Used with #196278

1 1/2" x 1/2" Reducer Busing (SPxHose Barb) 80

2" Testing Plug & Bushing Kit (SPxPlug) 10

Cement

PVC Cement, Low VOC (1 pint/473ml) 12

PVC Cement, Low VOC (1 quart/946ml) 12

Transition Cement - To ABS Only (1 pint/473ml) 12

Primer should be used when installing System636 products at temperatures

PVC/CPVC Purple Primer, Low VOC (1 pint/473ml) 12

PVC/CPVC Clear Primer, Low VOC (1 pint/473ml) 12

PVC/CPVC Purple Primer, Low VOC (1qt/946ml) 12

Primer

below 0

o

C

80

196005

081216

194000

196352

196242

196232

196122

196022

196082

196006

081219

194001

196353

196243

196233

196123

196023

196083

196364

196822

196282

196278

196143

196040

196041

196044

196042

196017

196043

Concentric Vent Kits

• These "pipe-in-pipe" kits allow for both exhaust and intake pipes to
penetrate the roof or side wall through only one hole and are
certified with mechanically fastened rain caps

• Screw/bolt assembly (included) for mechanically fastening the rain
cap can be easily removed for cleaning or maintenance

Wall Termination Kits

• For a traditional vent style, IPEX’s PVC Wall Termination Vent Kits
require only two small wall penetrations for intake and exhaust.

• Kits include a white finishing plate with a self sealing foam back
that can be screwed to the exterior wall.

Testing Plug & Bushing Kit

• Allows an inline access point for flue monitoring using fully certified
System 636 components. The kit consists of a 2" x 1/2" reducer
bushing (Spig x FPT) and a removable 1/2" MPT plug.

• May be installed in new installations or added to existing lines
when monitoring is required

• Bushing must be inserted in a 2" fitting socket

• May be used on vent lines in any diameter

• Certified for use only on IPEX System 636 flue gas vent lines.

Wall

Termination

Kit

Concentric Vent Kit

Testing Plug

& Bushing

Kit

NOTES:

1. Do Not

interchange pipe, fittings or chemicals from different BH vent manufactures. Doing so will

void System636™ product certification and warranty.

2. Contractors must check local codes for proper venting

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

14/12/12

Condensate Water Neutralizer Kit For High Efficient Gas Furnaces

• Inline cartridge that will raise or neutralize the pH level of the
condensate water

• Limestone neutralizer material should be changed yearly

Description Includes Part Number

2" Inline cartridge 1/2" ID vinyl tubing, hose clamps & mounting ties

J Hooks (Furnace Venting Accessory)

Description Part Number

2" x 7 1/2" DWV Swiveling J Hook (Plastic)

3" x 7 1/2" DWV Swiveling J Hook (Plastic)

A45-4

Furnaces

902377

515-J2000

515-J3000

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

11/06/10

Variable Speed Blower Kits for Frigidaire "G6 & L1" Gas Furnaces

• 904231 kit fits all G6/L1 series gas furnaces with an "A" width
cabinet. May be configured for air conditioning/heat pump airflows
from 1 1/2 to 3 tons nominal capacity.

• 904075 kit fits all G6 (RA,RC,RK&RL) series gas furnaces with "B"
& "C" width cabinets. May be field configured for air conditioning/
heat pump airflows from 2 to 5 tons nominal capacity.

• Designed to maximize system efficiencies, improve air quality and
reduce sound levels

• Air conditioning and heat pump efficiencies up to 16 SEER and 8.5
HSPF

• ECM (electronically commutated motor) variable speed DC motor
allows for 12 selected cooling airflows and 8 heating airflows to
match any applications

• Extra low speed for "fan only" operation

• Extra quiet and smooth blower on and off cycles

• Warranty: Carries the balance of original equipment warranty

Description Part Number

WARNING
Not for use with Model Numbers:
*G6RK096-12B & *GF1RK096-12B

Fits "A" Width Cabinets for G6 & L1 series

Fits "B" & "C" Width Cabinets for G6: RA,RC,RK,RL series

(not suitable for "B" cabinet 1200 CFM applications)

A45-5

Furnaces

904231

904075

904231 904075

Nominal Blower Size

Maximum Motor HP

Motor Type

Cooling CFM Range*

Heating Airflow Range*

* Airflow is held constant regardless of external static pressure within the HP and RPM
limits of the motor

Variable Speed Motor Tester - TECMate PRO™

• Designed to assist field service technicians by troubleshooting GE
ECM 2.3 motors independently of the HVAC system

TECMate Pro™ Variable Speed Motor Tester

Specifications

10" x 6" 11" x 10"

1/2 3/4

Programmable

Variable Speed

720 to 1240 720 to 1870

550 to 1215 720 to 1800

Description Part Number

Programmable

Variable Speed

904232

Twinning Kit For G7 Single Stage Gas Furnaces

• Provides the capability to combine the operation of two single stage
gas furnaces with PSC motors (not for use with 2 stage, modulating or
variable speed blower models)

• Twinning function not backwards compatible with furnaces manufac­tured prior to June 2009

G7 Twinning Kit For Single Stage Gas Furnaces Manufactured After

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

Description Part Number

June 2009

920919

06/09/13

A45-6

Furnaces

This Page Left

Intentionally

Blank

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]

18/02/11

A45-7

Furnaces

Oil-Fired Forced Air Furnaces With Burner

• 80+ AFUE

• Warranty: Limited lifetime on 14 gauge heat exchanger; 1 year parts

• LFR Models: Chamber-less unit is designed for compact installations requiring front or rear flue. The unit is approved

for chimney or balanced flue venting and is ideal for electric conversions. The large filter rack can be placed on either
side, bottom or rear

• LFR-VSM Models: With the Newmac Ultratech™ Motor Control. This system incorporates the furnace, control
board, motor & blower. The 24VAC powered board uses a standard external HVAC transformer, is air conditioning
ready and has LED indication and diagnostic output.

• NLF Model: For traditional replacement or new home construction requiring front flue

• NL2 Model: For traditional replacement or new home construction requiring rear flue

• NH3 Model: Vestibuled cabinet is approved for closet clearances

• All Pre & Post Purge Burners can be used with a Sealed Venting System (SVS). This system allows direct

venting without chimneys. Required for installation: Sealed Venting Unit, Oil Flex Vent & Air Duct.

Description Flue

Highboy Front / Rear 81,000 3 1/3 4 F3 Riello Newmac

Highboy Front / Rear 81,000 3 1/3 4 Beckett AFG Newmac

Highboy Front / Rear 81,000 3 1/3 4

Highboy Front / Rear 81,000 3 1/3

Highboy Front / Rear 81,000 3 1/3

Lowboy Front 118,000 3.5 1/2 4 Beckett AFG Newmac

Lowboy Rear 77,000 3.5 1/2 4 Beckett AFG Newmac

Highboy Top 101,000 3 1/2 4 Beckett AFG Newmac

Btuh

Output

AC Rating

(tons)

Direct Drive Blower Motor

HP Speed

Variable

Speed

Variable

Speed

Burner Brand

Beckett AFG

Pre & Post Purge

Beckett AFG Newmac

Beckett AFG

Pre & Post Purge

Newmac

Newmac

Part Number

(Model Number)

8010050-3*

(LFR)

8010050-3B*

(LFR80)

8010050-3BP*

(LFR)

8010081-3B*

(LFR-VSM)

8010081-3BP*

(LFR-VSM)

8010033DD-3B

(NLF118)

8010027DD-3B*

(NL2)

5010035

(NH3-101)

* Energy Star Rated

Davies also stocks a selection

of Beckett Burners.

Call Davies Pros On Controls

for proper application.

8010050-3B (LFR)

Replacement Parts For 8010050-3B (LFR80) Furnace With Beckett AFG Burner

Description Specifications Part Number

Hago Nozzles

Blower Unit (less Motor) Bore: 1/2" Fan: 10" dia. Rotation: CW

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

Davies Supply Group Ltd.

Capacity (USgal/hr): 0.50 Spray Angle: 45° - B

Capacity (USgal/hr): 0.55 Spray Angle: 45° - B

[phone] [phone] [phone]

21566108

21566109

2040116T

5010035 (NH3)

15/01/10

Combination Oil/Gas & Wood Furnace With Beckett AFG Burner

• Separate combustion chamber for oil/gas

• Extra large brick lined firebox

• Pre-heated combustion air is introduced by a thermostatically con-

trolled draft system

• Disposable air filters

• Warranty: 10 year limited on the heat exchanger

• CL85/95 Model: Automatic switching from wood to oil

• CL86/96C Model: Automatic switching from wood to oil, separate

thermostats & large fire door. Burns wood without grates for better
control and efficiency.

• CL86/96G Model (Wood/Oil/Coal): Where wood or coal is avail-
able, this model gives the ultimate conservation choice. Large firebox
and firedoor with shaker grates for coal.

CFM

900/1000 82,000/94,000 1/3 HP Newmac

1200/1200 86,000/ 96,000 1/3 HP Newmac

1200/1200 86,000/ 96,000 1/3 HP Newmac

Btuh

Output

Blower

Motor

Brand

A45-8

Furnaces

Part Number

(Model Number)

8010012-2B

(CL85/95)

8010015-2B
(CL86/96C)

8010014-2B
(CL86/96G)

Wood Only Furnaces

8010024G 8010001

• WA0 Model: Is a wood add-on furnace designed for operation in
conjunction with an existing residential oil furnace system with a fir­ing rate of .75 gph to 1.10 gph. 10 year limited warranty.

• WB100 Model: Can be used alone or in conjunction with an existing
residential system. 10 year limited warranty on the heat exchanger.

CFM

1200 100,000 - Newmac

1200 100,000 1/2 HP Newmac

Btuh

Output

Blower

Motor

Brand

Part Number

(Model Number)

8010024G

(WA0)

8010001

(WB100)

Davies Supply Group Ltd.

Calgary [phone] Lethbridge [phone] Saskatoon [phone]

[phone] [phone] [phone]