Frigidaire GRSS2352AF, GRSC2352AF Use & Care Manual

REFRIGERATOR
use
Introduction .......................................................2
Water Supply Connection .......................... 13
&
Automatic Ice and Water Dispenser ...... 19
Normal Operating Sounds ........................ 22
Care and Cleaning ....................................... 25
care
A19894604 (November 2020)
Frigidaire.com USA 1-800-374-4432 Frigidaire.ca Canada 1-800-265-8352
2

INTRODUCTION

Welcome to our
Thank you for bringing Frigidaire into your home! We see your purchase as the beginning of a long relationship together.
This manual is your resource for the use and care of your product. Please read it before using your appliance. Keep it handy for quick reference. If something doesn’t seem right, the troubleshooting section will help you with common issues.
FAQs, helpful tips and videos, cleaning products, and kitchen and home accesso­ries are available at Frigidaire.com.
We are here for you! Visit our website, chat with an agent, or call us if you need help. We may be able to help you avoid a service visit. If you do need service, we can get that started for you.
Let’s make it ocial! Be sure to register your product.
Keep your product info here so it’s easy to find.
Model Number ____________________
Serial Number ____________________
Purchase Date ____________________
family
Lorem ipsum Lorem ipsumLorem i psumLorem ipsumLorem ipsumLore m ipsumLorem ipsum
Lorem ipsum Lorem ipsumLorem i psumLorem ipsumLorem ipsumLore m ipsumLorem ipsum
Lorem ipsum Lorem ipsumLorem
Installation Checklist
Doors
 Handles are secure and tight  Door seals completely to cabinet on
all sides
 Doors are level with each other.
Leveling
 Appliance is level side-to-side and
tilted ¼" (6 mm) front-to-back  Toe grille is properly attached.  Cabinet is level on the floor.
Electrical Power
 House power turned on  Appliance is plugged in
Ice Maker
 House water supply connected
to appliance (Warning: Potable
water supply only.)  No water leaks present at all
connections - recheck in 24 hours  Ice maker is turned ON  Ice & water dispenser
operates correctly
Final Checks
 Shipping material removed  Refrigerator and freezer tempera-
tures set to recommended setting  Crisper humidity controls set
(some models)  Registration card sent in
Serial Number Location

IMPORTANT SAFETY INFORMATION

3
WARNING
Please read all instructions before using this appliance.
Safety Definitions
This is the safety alert symbol. It is used to alert of potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates an imminently haz­ardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially haz­ardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially haz­ardous situation which, if not avoided, may result in minor or moderate injury.
IMPORTANT
DANGER
DANGER Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical devices to defrost refrigera­tor. Do not puncture refrigerant tubing.
DANGER Risk of fire or explosion. Flammable refrigerant used. To be re­paired only by trained service person­nel. Use only manufacturer-authorized service parts. Any repair equipment used must be designed for flammable refrigerants. Follow all manufacturer repair instructions. Do not puncture refrigerant tubing.
CAUTION
CAUTION Risk of fire or explosion. Dispose of refrigerator properly in accordance with the applicable federal or local regulations. Flammable refrigerant used.
CAUTION Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used.
WARNING
CALIFORNIA RESIDENTS ONLY Cancer and Reproductive Harm
www.P65Warnings.ca.gov
IMPORTANT indicates installation, oper­ation or maintenance information which is important but not hazard-related.
4
IMPORTANT SAFETY INFORMATION
Child Safety
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the appliance is unpacked. Children should never use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suocation.
Safety Instructions
• DO NOT store or use gasoline, or other flammable liquids, or aerosols within or in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards.
• DO NOT operate the unit in the presence of explosive fumes.
• Avoid contact with any moving parts of automatic ice maker.
• Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.
Proper Disposal of your Appliance
Risk of child entrapment
Child entrapment and suocation are not problems of the past. Junked or abandoned appliances are still dangerous – even if they will sit for “just a few days”. If you are getting rid of your old unit, please follow the instructions below to help prevent accidents.
We strongly encourage responsible appli­ance recycling/disposal methods. Check with your utility company or visit
energystar.gov/recycle for more informa-
tion on recycling your old appliance.
Before you throw away your appliance:
• Remove doors.
• Leave shelves in place so children may not easily climb inside.
• Have refrigerant removed by a qualified service technician.
WARNING
These guidelines must be followed to ensure that safety mechanisms in this unit will operate properly.
Grounding type wall receptacle
Power cord with 3-prong grounded plug
Do not, under any circumstances, cut, remove, or bypass the grounding prong.
IMPORTANT SAFETY INFORMATION
5
Electrical information
• The appliance must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet.
The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded 3-prong recepta­cle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified elec­trician. Avoid connecting the unit to a Ground Fault Interrupter (GFI) circuit.
Do not use an extension cord or adapter plug.
• If the power cord is damaged, it should be replaced by an authorized service technician to prevent any risk.
• Never unplug the appliance by pull­ing on the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent dam­aging the power cord.
• Performance may be aected if the voltage varies by 10% or more. Oper­ating the appliance with insucient power can damage the compressor. Such damage is not covered under your warranty.
• Do not plug the unit into an electrical outlet controlled by a wall switch or pull cord to prevent the unit from being turned o accidentally.
IMPORTANT
Turn o power to your appliance you must unplug the power cord from the electrical outlet.
CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sud­den temperature change.
IMPORTANT
CFC/HCFC Disposal
Your old unit may have a cooling system that used CFCs or HCFCs (chlorofluoro­carbons or hydrochlorofluorocarbons). CFCs and HCFCs are believed to harm stratospheric ozone if released to the atmosphere. Other refrigerants may also cause harm to the environment if released to the atmosphere.
If you are throwing away your old ap­pliance, make sure the refrigerant is re­moved for proper disposal by a qualified technician. If you intentionally release refrigerant, you may be subject to fines and imprisonment under provisions of environmental legislation.
6

FEATURES

*Features may vary according to model
A
A Fixed Door Bins
B Ice Maker
C Ice Container
D Shelves
E Damper/Air Filter Housing
F LED Lights
G Water Filter
B
C
F
F
D
N
F G
E
I
F
K
F
L
M
H Dairy Compartment
I Temperature Sensor/Thermistor
J Adjustable Door Bins
K Deli Drawer (some models)
L Crisper Drawers
M Toe Grille
N Slide-Out Basket
H
J
IMPORTANT
Accessories are available for your appliance and may be purchased at Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or 1-800-265-8352 in Canada) or from an authorized seller.

INSTALLATION

Installing Toe Grille
Removing Toe Grille
7
This Use & Care Manual provides general operating instructions for your model. Use the unit only as instructed in this Use & Care Manual. Before starting the appli-
ance, follow these important first steps.
Location
• Choose a place that is near a ground­ed electrical outlet. Do Not use an extension cord or an adapter plug.
• If possible, place the unit out of direct sunlight and away from the range, dishwasher or other heat sources.
• Install the appliance on a floor that is level and strong enough to support a fully loaded unit.
• Consider water supply availability for models equipped with an automat­ic ice maker. If you do not hook up water to the appliance, remember to turn the ice maker o.
WARNING
This appliance is intended to be used in household and similar applications such as:
• sta kitchen areas in shops, oces
and other working environments;
• farm houses and by clients in hotels,
motels and other residential type environments;
• bed and breakfast type
environments;
• catering and similar non-retail
applications.
Installation
Installation clearances
• Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:
Sides & Top "
Back 1"
NOTE
If your unit is placed with the door hinge side against a wall, you may have to allow additional space for the handle so the door can be opened wider.
Toe Grille Installation and Removal
To install toe grille
1. Open both doors. Slide the left and right sides of the toe grille over the lower hinges of the appliance.
2. While pushing the toe grille firmly against cabinet, fasten the bottom clips of toe grille to the cabinet.
3. Fasten the top clips to the cabinet.
4. Close the doors. Fasten the right and left side clips into the groove of the bottom hinge.
3
1
4
2
3
4
2
1
CAUTION
Do Not install the unit where the tem-
perature will drop below 55°F (13°C) or rise above 110°F (43°C). The compres­sor will not be able to maintain proper temperatures inside the appliance.
Do Not block the toe grille on the lower front of your unit. Sucient air circula­tion is essential for the proper opera­tion of your appliance.
To remove the toe grille
1. With both doors closed, unfasten the right and left side clips of toe grille from the bottom hinge groove.
2. Open both doors. Press firmly on the top of the toe grille until the top of the toe grille pops o.
3. Pull the toe grille outward toward your body and o of the lower hinges.
2
1
3
2
1
3
8
INSTALLATION
Door Opening
NOTE
The doors are designed to shut by themselves within a 20 degree opening.
Position your unit to allow easy access to a counter or table when removing food. For the best use of drawers and freezer baskets, position the appliance where both doors can fully open.
Guidelines for final positioning of your unit:
• Rest all 4 corners of the cabinet firmly on the floor.
• Level the cabinet at the front and rear.
• Tilt the sides ¼" (6 mm) from front to back (to ensure the doors close and seal properly).
• Align the doors with each other and level.
Meet all of these conditions by raising or lowering the adjust­able front rollers.
To level the cabinet using the front rollers:
1. Open both doors and remove the toe grille (see “Toe Grille Installation and Removal” in INSTALLATION).
2. Close the doors and use a wrench to raise (clockwise) or lower (counterclockwise) the front rollers.
3. Ensure both doors are bind-free with their seals touching the cabinet on all 4 sides.
Open Door
INSTALLATION
9
To level the doors using the adjustable lower hinge:
NOTE
Some models will not have a set screw. For those models follow steps 2 through 4.
1. Before leveling either door, remove the set screw that locks the door height into position. (The door cannot be adjusted without the set screw removed).
2. If the refrigerator door is lower than the freezer door, raise the refrigera­tor door by turning the adjustment screw counterclockwise using a 7/16" wrench. (See illustration.)
3. If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw counterclockwise using a 7/16" wrench. (See illustration.)
4. After leveling, verify the door stop contacts the lower hinge and the top of the door does not contact the upper hinge through full movement of the door (from fully closed to fully open).
Door Stop Flange
7/16" Wrench and 3/32" Hex Key (some models)
5. Reinstall the set screw, locking the door height.
6. Replace the toe grille by fitting it into place (see “Toe Grille Installation and Removal” in INSTALLATION).
Hinge Flange
Set Screw (some models)
Hinge
10
Wrench Set
Adjustable
Tools Necessary:

DOOR REMOVAL

Phillips™
Head
&
Flathead
Screwdriver
To remove the refrigerator door:
1. Remove the 3 screws from the cover over the door hinge.
2. Lift hinge cover straight up and o.
3. Trace lightly around the door’s top hinge with a pencil. This makes reinstallation easier. Remove the 2 screws from the top hinge. Lift the door o of the bottom hinge and set it aside.
Socket
or
Top Hinge Cover Front Screw
⅜" Fixed
Wrench
Top
Hinge
Screw
or
Bottom Hinge Screw
Wrench
Top Hinge
Cover Rear
Screw
Rear Cover Screw
4. Remove the 2 bottom hinge screws and hinge if necessary.
Screws
Adjustable Hinge (some models)
Door
Hinge Assembly
Front Cover Screws
Closer
Hinge
Top Hinge Cover
Hinge Screws
Top Hinge
Pin
To prepare for removing the doors:
1. Make sure the electrical power cord is unplugged from the wall outlet.
2. Open both doors and remove the toe grille (as explained in the Instal­lation Instructions that came with your appliance).
3. Remove any food from the door shelves.
4. Close the doors.
To reinstall the refrigerator door, reverse the above steps.
DOOR REMOVAL
Door
Assembly
Screws
Tubing
Closer
Pin
Hinge
Door
Water Line Tubing
Screws
Hinge Assembly
To Disconnect
touches face of fitting
11
To remove the freezer door:
1. Remove the 3 screws from the cover over the top door hinge.
2. Lift hinge cover straight up and o.
3. Release the wires from the routing clip.
IMPORTANT
To prevent wire damage, ensure the wires are rerouted through the routing clip when reassembling the hinge cover.
1. Press outer ring against face of fitting
2. Pull to remove tube
To Connect
Insert tube and push until mark
Adjustable Hinge (some models)
Water Line
Disconnect the multi-wire cable connector located above the top hinge. Press the cable and lock and separate the 2 cables.
4. Trace lightly around the hinge with a pencil. This makes reinstallation easier.
5. Detach the water tube from the connector located below the freezer door. The connector releases when you press its outer sleeve inward.
6. Remove the 2 screws from the top hinge. Remove the hinge pulling the multi-wire cable through it. Lift the door o the bottom hinge.
7. Remove the 2 bottom hinge screws and hinge if necessary.
Hinge
Non-Adjusting Hinge (some models)
8. Lay the door on its side to avoid damage to the water tube extending from the bottom hinge.
To reinstall the freezer door, reverse the above steps.
CAUTION
Be sure doors are set aside in a secure position where they cannot fall and cause personal injury.
Loading...
+ 23 hidden pages