Frigidaire GLTF1670AS0 Owner’s Manual

WASH/RINSE TEMPERATURE

WARM UA%M_

COLD COLD COLD COLD

WARM WARM /

COLD COLD

HOT WARMCOLD _/

WARM T_MPERATUP,_

EXTRA RINSE

YES NO

OPERATINGINSTRUCTIONS

FINAL SPIN SPEED

SLOW NORMAL FAST

W_HQ

RINSE O

FINAL SPIN O

ON OFF

DOOR LOCK O

CYCLE SIGNAL

FULL TQ_T,_T/

DELICATES

r_t,At

SM_,

EXTRACARE

COLORS/

PERM PRESS

WA5H

WASH

RNAL

SPIN

WHITES/

REGULAR

HEAVY WASH

WASH

UGHT

WASH

F_:AL

5PIN

SHORT WASH

Before Operating Your Washer

Read your washer Use and Care Guide. It has important safety and warranty information. It also

has many suggestions for best washing results.

To reduce the risk of fire, electric shock,

or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your washer Use and Care Guide

before operating this appliance.

........ lit ii r_l

Operating Steps

Read and follow Washing Procedures in your Use and Care Guide. It provides detailed information for preparing the wash load and choosing control

settings to ensure best washing results.

1. Sort laundry into loads that can be washed together.

2. Prepare items for washing.

Printedin U. S. A.

3. Pretreat stains and heavy soil.

4. Add laundry load to the wash drum.

Open the dispenser drawer and add the measured amount of detergent to the

detergent compartment. If desired, add liquid bleach and fabric softener to the appropriate

compartments. Slowly close dispenser drawer. The washer will not operate with the drawer

open.

Set Temperatures switch according to fabric type and soil level of each load.

If desired, select Extra Rinse in Whites/Regular, Colors/Perm Press, or Delieates cycle.

Select Final Spin Speed as desired.

Push in the cycle selector knob and turn it clockwise to the desired wash cycle and

setting.

10. Start the washer by closing the door and pulling out the cycle selector knob. The

washer will not operate with the door open. As a safety measure, the door will automatically lock during the entire wash

cycle. When the door is closed, the Door Lock Indicator lights up when the washer starts, and

turns off at the end of the cycle.

To stop the washer, push in the cycle selector knob.

To change a cycle, push in the cycle selector knob and turn it clockwise to the

desired setting.

Pull out the knob to restart the washer.

11. Remove items when cycle ends. A signal will sound at the end of the cycle when the

Cycle Signal ON is selected.

Note: From time to time you may see water in the bleach andfabric softener compartments.

This is a result of the siphoning action and is part of the normal operation of the washer.

p/N 134072300(0107)

t',,

Cycle Selection

For best results, follow the fabric care label directions on items to be washed.

Whites/Regular Cycle

up to 18 minutes of reversing tumble action for most fabrics. Three rinses, two spins, a pause and a brief

tumble complete the cycle. Select SLOW, NORMAL orFAST Final Spin asdesired.

Heavy Wash provides up to 18 minutes of

reversing tumble action for heavily soiled fabrics. Wash provides up to 13 minutes of reversing

tumble action for normally soiled fabrics. Light Wash provides up to 6 minutes of reversing

tumble action for lightly soiled fabrics.

Short Wash Cycle

Saves time and water. Up to 6 minutes of reversing

tumble action for very lightly soiled fabrics. Two rinses, two spins, a pause and a brief tumble

complete the cycle. Extra Rinse is not an option with

this water conserving cycle. Select SLOW, NORMAL or FAST Final Spin as desired for this cycle.

Colors/Perm Press Cycle

Up to 13 minutes of reversing tumble action for cottons and blends with a no-iron finish. Three rinses,

two spins, a pause and a brief tumble complete the

cycle. Select SLOW, NORMAL orFAST Final Spinas desired for this cycle.

Wash provides up to 13 minutes of reversing tumble action for heavily soiled fabrics.

Extra Care provides up to 6 minutes of reversing tumble action for lightly soiled fabrics.

Knits and Delicates Cycle Up to 10 minutes of gentle tumble action for the

gentle care of knit, delicate and hand washable

items. Two rinses and two spins complete the cycle. Select SLOW, NORMAL or FAST Final Spinas desired

for this cycle.

Controls

Always follow instructions on fabric care labels.

Note: There is no need to select a water level

because the washer automatically adjusts the water level to the type and size of wash load.

TEMPERATURES - This determines water temperatures for washing and rinsing. For example, the Warm/Cold

setting provides a warm water wash and a cold water final rinse.

Note: Detergents are not as effective at wash water

temperatures below 65°F (18.3°C).

The following chart suggests wash/rinse temperatures for basic fabric types.

Wash/Rinse

Fabric T_y.p_e Temnerature

Heavily soiled white/colorfast cotton, perm press

Normally soiled white/colorfast

coRon, penn press

Lightly soiled/noncolorfast fabrics, knits, delicates, hand washables

Washable woolens Warm/Cold* unregulated or Automatic Wash Temperature

CYCLE SIGNAL - A signal will sound at the end of the cycle when the Cycle Signal is set to ON. This can be

turned offby selecting OFF on the Cycle Signal switch.

INDICATOR LIGHTS will turn on during the appropriate portions of each cycle: WASH, RINSE,

and FINAL SPIN. When the door is closed, the Door Lock Indicator lights up when the cycle selector

knob is pulled out, and turns off at the end of the cycle.

Hot/Cold

Warm/Cold*

Cold/Cold*

Auto Temp Control The normal temperature of warm and cold wash water

can be affected by the hot water heater setting and seasonally low ground water temperatures in some

geographic areas. Since detergents work best in wash water at a minimum of 65° F, select an Auto Temp

Control to regulate the temperature of the warm and cold wash water in any cycle.

Wash water in the Auto Temp Warm/Cold and Auto Temp Warm/Warm settings is regulated to

approximately 100 ° F. and the wash water in the Auto Temp Cold/Cold setting is regulated to approximately

70 ° F. Rinse water temperatures are not regulated.

EXTRA RINSE - Use Extra Rinse when additional rinsing is desired to remove excess dirt and detergent

from heavily soiled loads.

Select Extra Rinse YES to automatically include

an extra rinse in Whites/Regular, Colors/Perm Press, or Delicates cycle.

Select Extra Rinse NO to conserve water when an extra rinse is not desired.

FINAL SPIN - There are three final spin speed options available for each cycle. Note: The speeds

will vary from cycle to cycle. For example, Regular Fast spin speed is much faster than Delicate Fast spin speed.

SLOW is recommended for hand washables and

items which may wrinkle easily.

• NORMAL is recommended for most loads.

• FAST provides a faster spin speed to increase

water extraction and decrease drying time.

P/N 134072300 (0107)