ELECTRONIC OVEN CONTROL
Control Pad Functions
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those
shown. This doesn't change the way it operates. Also Push buttons or pads may be shaped differently.
Even-Cook
Convection Oven
Pre
Conv
bake
Conv
convert
Conv
roast
heat
Bake
Broil
Speed
clean
Clean
Maxx
clean
Conv Bake —
Used to select
the convection
bake feature.
Conv Convert—
Use to select the
Convection
Convert feature.
Bake—Use to
select the normal
baking feature.
Broil— Use to
select variable Broil
feature.
Conv Roast—
Use to select
the Convection
Roast feature.
Maxx Clean—
Use to select a
4 hour SelfCleaning cycle.
DELAY
TIMED
TIMER
LOCKED
DOOR
CLEAN
Oven
Clock
light
Bake
Start
time
time
Preheat—
Use to precondition the
oven
temperature.
CONV
BAKE
BROIL
ROAST
WARM
PROBE
Timer
On/Off
Keep
warm
Speed Clean —
Use to select a 2
hour SelfCleaning cycle.
Even-Cook
Convection Oven
Conv
bake
Conv
convert
Conv
roast
Pre
heat
Bake
Broil
Bake Time— Use
to enter the length
of the baking time.
123
6
5
4
7
Clear
/Off
Controls
98
0
START
Clean— Use to
select a 3 hour
Self-Cleaning
cycle.
Speed
clean
Clean
Maxx
clean
Conv
Pre
Heat
Bake
Broil
Speed
clean
Cle an
Maxx
clean
bake
Conv
convert
Conv
roast
Oven
Light— Use
to turn the
oven light ON
and OFF.
DELAY
TIMED
DOOR
LOCKED
Oven
light
Bake
time
TIMER
CLEAN
Clock
Start
time
CONV
ROAST
Start Time— Use with
Bake, Bake Time and
Clean Pads to program a
Delayed Timed Bake or
Delay Self-Cleaning cycle.
Bake
time
Start
time
Keep
Warm
TIMED
DOOR
Clock— Use
to set the
time of day.
BAKE
BROIL
WARM
PROBE
Timer
On/Of f
Keep
warm
Keep Warm
— Use to
select the
Keep Warm
feature.
Even-Cook Convection Oven
DELAY
TIMER
CONV
LOCKED
CLEAN
ROAST
BAKE
WARM
BROIL
PROBE
1 2 3
4 5 6
7 8 9
Oven
light
Timer
Clock
On/Off
Timer ON/
OFF— Use
to set or
cancel the
minute timer.
Clear
/Off
Controls
0 Thru 9
number pads—
Use to enter
temperature and
times.
123
4
5
7
Clear
/Off
Controls
Clear/Off or Lock Controls - Use to
cancel any oven mode previously
entered except the Time of Day &
Minute Timer. Push Clear/Off to stop
cooking. Also used to control the Oven
Lockout feature.
0
6
98
START
START
0
Start—
Use to
start all
oven
features
(not used
with
Oven
Light).
Minimum & Maximum Control Pad Settings
All the features listed have minimum and maximum time or temperature settings that may be entered into the control. An
ENTRY acceptance beep will sound each time a control pad is touched (the Oven Lockout pad is delayed by 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
FEATURE MIN. TEMP./TIME MAX. TEMP./TIME
PREHEAT TEMP. 170°F/ 77°C 550°F/ 288°C
BAKE TEMP. 170°F/ 77°C 550°F/ 288°C
BROIL TEMP. 400°F/ 205°C 550°F/ 288°C
MINUTE TIMER 12 Hr. 0:01 Min. 11:59 Hr./ Min.
24 Hr. 0:01 Min. 11:59 Hr./ Min.
CLOCK TIME 12 Hr. 1:00 Hr./ Min. 12:59 Hr./ Min.
24 Hr. 0:00 Hr./ Min. 23:59 Hr./ Min.
COOK TIME 12 Hr. 0:01 Min. 11:59 Hr./ Min.
24 Hr. 0:01 Min. 11:59 Hr./ Min.
START TIME 12 Hr. 1:00 Hr./ Min. 12:59 Hr./ Min.
24 Hr. 0:00 Hr./ Min. 23:59 Hr./ Min.
CONVECTION BAKE 170°F/ 77°C 550°F/ 288°C
CONVECTION ROAST 170°F/ 77°C 550°F/ 288°C
Printed in United States
Versión en español
Si desea obtener una copia
en español de este Manual
del Usuario, sírvase escribir
a la dirección que se incluye
a continuación. Solicite la P/
N 318204125E.
Spanish Owner's Guides
Frigidaire Company
P. O. Box 9061
Dublin, Ohio 43017-0961
1
318204125 (0707) Rev. B
Setting the Clock
0
START
Clock
START
Clear
/Off
Clock
Clock
START
Clock
Clean
START
Clear
/Off
Clean
Clock
The
pad is used to set the clock. The clock may be set for 12 or 24 hour time of day
operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the
time in the display will flash (See Figure 1).
INSTRUCTIONS PRESS DISPLAY
To set the clock (example below for 1:30)
1. Press
2. Press 1 3 0 pads to set the time of day to 1:30 (Figure 3).
"CLO" will stay in the display. Press
and the clock will start (Figure 4).
. "CLO" will appear in the display (Figure 2).
1 3
. "CLO" will disappear
Changing between 12 or 24 hour time of day display
1. Press and hold
"12h" (Figure 5) or "24h" (Figure 6) will appear in the display and
the control will beep once.
2. Press
to switch between the 12 and 24 hour time of day
for 7 seconds (Figure 3). After 7 seconds,
for 7 seconds
TIMED
DOOR
TIMED
DOOR
TIMED
DOOR
TIMED
DOOR
DELAY
LOCKED
DELAY
LOCKED
DELAY
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 1
TIMER
CLEAN
Figure 2
TIMER
CLEAN
Figure 3
TIMER
CLEAN
Figure 4
CONV
ROAST
CONV
ROAST
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BAKE
WARM
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
display. The display will show either "12h" (Figure 5) or "24h"
(Figure 6).
3. Press
to accept the change or press
Clear
to reject the
/Off
change.
4. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen, the
clock will now display time from 0:00 through 23:59 hours.
or
Clear
/Off
Figure 5
Figure 6
2
Timer
On/OOff
Timer
On/OOff
Timer
On/OOff
START
START
Timer
On/OOff
Timer
On/OOff
Setting the Clock (continued)
Timer
On/OOff
Clean
Timer
On/OOff
Clean
START
Clear
/Off
Clean
START
Timer
On/OOff
5
START
Timer
On/OOff
Timer
On/OOff
Clear
/Off
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER ON/OFF
and CLEAN
pads control the Continuous Bake or 12 Hour Energy Saving features.
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven
control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for
Continuous Baking.
INSTRUCTIONS PRESS DISPLAY
To set the control for Continuous Bake or 12 Hour
Energy Saving features
1. Press and hold
"12h" or "- -h" will appear in the display and the control will
beep once.
2. Press
to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12h" (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving
mode and "- -h" indicates the control is set for the Continuous
Bake feature (Figure 3).
3. Press
to accept the change (Figure 4; display will return
to time of day) or press
for 7 seconds (Figure1). After 7 seconds
Clear
to reject the change.
/Off
for 7
seconds
Clear
/Off
TIMED
DOOR
TIMED
DOOR
TIMED
DOOR
TIMED
DOOR
DELAY
LOCKED
DELAY
LOCKED
DELAY
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 1
TIMER
CLEAN
Figure 2
TIMER
CLEAN
Figure 3
TIMER
CLEAN
Figure 4
CONV
ROAST
CONV
ROAST
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BAKE
WARM
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
Setting Timer
The TIMER ON/OFF
beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the
other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.
pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will
INSTRUCTIONS PRESS DISPLAY
To set the Timer (example for 5 minutes)
1. Press
display (Figure 5).
2. Press the number pads to set the desired time in the display
(example 5). Press
down with "5:00" and "TIMER" will stay in the display (Figure
6). Note: If
time of day after 25 seconds.
3. When the set time has run out, "End" and "TIMER" will show in
the display (Figure 7). The clock will sound with 3 beeps every
5 seconds until
. "- - - -" will appear and "TIMER" will flash in the
. The time will begin to count
is not pressed the timer will return to the
is pressed.
TIMED
DOOR
TIMED
DOOR
TIMED
DOOR
DELAY
LOCKED
DELAY
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 5
TIMER
CLEAN
Figure 6
TIMER
CLEAN
Figure 7
CONV
ROAST
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
To cancel the Kitchen Timer before the set time has
run out
Press
. The display will return to the time of day.
3
Clear
/Off
Clear
/Off
Clear
/Off
Consumer Defined Controls
Clear
/Off
Clear
/Off
Clear
/Off
Start
time
Clean
Start
time
Clean
START
Clear
/Off
Clean
START
Clear
/Off
Start
time
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.
Setting Oven Lockout Feature
Clear
The
prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
To activate the Oven Lockout feature
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
/Off
INSTRUCTIONS PRESS DISPLAY
1. Press and hold
2. After 3 seconds a beep will sound, "LOC" will appear and
Clear
for 3 seconds.
/Off
for 3 seconds
TIMED
DOOR
DELAY
TIMER
LOCKED
CLEAN
Figure 1-A
CONV
ROAST
BAKE
WARM
"DOOR LOCKED" will flash in the display (If you have a range
see figure 1-A; if it's a wall oven see figure 1-B). Once the oven
door is locked the "DOOR LOCKED" indicator will stop
flashing.
To reactivate normal oven operation:
1. Press and hold
Clear
for 3 seconds. A beep will sound. "LOC"
/Off
Clear
for 3 seconds
/Off
TIMED
DOOR
TIMED
DOOR
DELAY
TIMER
LOCKED
CLEAN
Figure 1-B
DELAY
TIMER
LOCKED
CLEAN
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
will disappear. The "DOOR LOCKED" will flash in the display
until the oven door has completely unlocked (Figure 2).
Figure 2
2. The oven is again fully operational.
Setting Silent Control Operation
The START TIME
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can
be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
and CLEAN
pads control the Silent Control operation feature. The Silent Control operation
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation
DELAY
1. To tell if your range is set for normal or silent operation press
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
BROIL
PROBE
and hold
for 7 seconds. "- - - -" will appear and "DELAY"
will flash in the display (Figure 3). After 7 seconds "SP" will
appear in the display (Figure 4).
2. Press
to switch between normal sound operation and
silent operation mode. The display will show either "SP"
(Figure 4) or "--" (Figure 5).
If "SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If "- -" appears (Figure 5), the control is in
the silent operation mode.
3. Press
to accept the change or press
change.
Note: The control will always beep at the end of a kitchen timer
and will beep when a set temperature has been reached, even if
the control is set to silent operation.
Clear
to reject the
/Off
DELAY
LOCKED
Figure 3
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
for 7 seconds
TIMED
DOOR
Figure 4
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 5
Clear
or
/Off
4
Clean
START
Clear
/Off
Consumer Defined Controls (continued)
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Clean
START
Clear
/Off
Clean
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL
Broil
and CLEAN
pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory
to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press
to accept the change or press
Clear
to reject the
/Off
change.
Broil
Broil
for 7 seconds
Clear
or
/Off
TIMED
TIMED
DOOR
DOOR
TIMED
DOOR
DELAY
DELAY
LOCKED
LOCKED
DELAY
LOCKED
TIMER
TIMER
CLEAN
CLEAN
Figure 1
TIMER
CLEAN
Figure 2
Figure 3
CONV
CONV
ROAST
ROAST
CONV
ROAST
BAKE
BAKE
WARM
WARM
BAKE
WARM
BROIL
BROIL
PROBE
PROBE
BROIL
PROBE
5
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
START
Clear
/Off
START
Clear
/Off
Setting Oven Controls
START
START
Clear
/Off
START
Clear
/Off
3
5
4
5
Setting Preheat
The PREHEAT
then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not
necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between
170°F to 550°F.
To set the Preheat temperature for 375°F
1. Arrange the interior oven racks.
2. Press
Pre
pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and
Heat
INSTRUCTIONS PRESS DISPLAY
Pre
. "350°" and "BAKE" will appear in the display
Heat
Pre
Heat
Figure 1
(Figure 1). Note that if a preheat of 350°F is needed, press
.
3. Press 3 7 5. "375°" and "BAKE" will appear in the
display (Figure 2).
4. Press
. "PRE" and "BAKE" will appear in the display as
the oven heats and reaches 375°F (Figure 3).
Note: After the oven has reached the desired temperature (this
example, 375°F) the control will beep and the "PRE" light will turn
off and oven temperature will be displayed (Figure 4). If you
missed hearing the beep, you can tell that the oven has reached
preheat temperature if you see the oven temperature showing in
the oven display. Once the oven has preheated, PLACE FOOD IN
THE OVEN. The "BAKE" light will stay on.
Press
Clear
when baking is complete or to cancel the preheat
/Off
feature.
To change Preheat temperature while oven is
preheating (example: changing from 375°F to 425°F)
If it is necessary to change the preheat temperature while the oven
is preheating to the original temperature:
1. While preheating, press
the display (Figure 5)
Pre
. "375" and "BAKE" will appear in
Heat
7
Clear
/Off
Pre
Heat
Figure 2
Figure 3
TIMER
Figure 4
Figure 5
Figure 6
BAKE
2. Enter the new preheat temperature. Press 4 2 5.
"425°" and "BAKE" will appear in the display (Figure 6).
3. Press
. "PRE" and "BAKE" will appear in the display as
the oven heats to 425°F (Figure 7). A beep will sound once the
oven temperature reaches 425°F and the display will show
"425°" and "BAKE" (Figure 8).
4. When baking is complete press
Clear
/Off
Note: Electric models only, while in preheat mode, the
convection fan and convection element will be activated during the
first rise of temperature to allow the oven to reach its target
temperature faster. The bake and broil elements will also cycle for
better heat distribution.
2
Figure 7
.
Clear
/Off
Figure 8
6
Setting Oven Controls (continued)
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
4
5
START
START
Clear
/Off
START
3
5
START
START
Clear
/Off
Setting Bake
The BAKE
Bake
pad controls normal baking. The oven can be programmed to bake at any temperature from 170° F to
550° F (The sample shown below is for 375°F).
INSTRUCTIONS PRESS DISPLAY
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
Bake
2. Press
display (Figure 1). If a bake of 350°F is needed, press
, "350°" will appear and "BAKE" will flash in the
.
3. Press 3 7 5 (Figure 2). "BAKE" will continue to flash and
"375°" will appear in the display.
4. Press
. The display will show "375°" and "BAKE" (Figure 3).
A beep will sound once the oven temperature reaches 375° F.
Pressing
Clear
will cancel the Bake feature at any time.
/Off
To change the Bake Temperature (example: changing
from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F and the
Bake
7
Clear
/Off
TIMED
DOOR
DELAY
LOCKED
Figure 1
Figure 2
Figure 3
TIMER
CLEAN
Figure 4
CONV
ROAST
BAKE
BAKE
WARM
PROBE
BROIL
PROBE
oven temperature needs to be changed to 425°F, press
Bake
(Figure 4). "375°" will appear and "BAKE" will flash in the
display.
2. Press 4 2 5 (Figure 5). "BAKE" will continue to flash and
"425°" will appear in the display.
3. Press
. "BAKE" and "425°" will stay in the display (Figure 6).
Note: If the oven was recently heated from prior cooking and has
remained heated, the bake element symbol may not show in the
display immediately.
Note: Electric models only, during the first rise of temperature, the
convection fan and convection element will be activated to allow the
oven to reach its target temperature faster. The Bake and Broil
elements will also cycle for a better heat distribution.
Bake
2
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
Figure 5
Figure 6
CONV
ROAST
BAKE
WARM
BAKE
BROIL
PROBE
7
Setting Oven Controls (continued)
Setting Convection Bake
The CONV BAKE
can be programmed for Convection baking at any temperature between 170°
F (77°C) to 550° F (288° C).
Convection baking uses a fan to circulate the oven's heat evenly and
continuously within the oven (Figure 1). This improved heat distribution
allows for even cooking and excellent results using multiple racks at the
same time. Foods cooked on a single oven rack will generally cook faster
and more evenly with Convection Bake. Multiple oven rack cooking may
slightly increase cook times for some foods, but the overall result is time
saved. Breads and pastries brown more evenly.
General Convection Bake Instructions
1. When using Convection Bake, adjust the cook time for desired doneness
as needed. Time reductions will vary depending on the amount and type
of food to be cooked. Cookies and biscuits should be baked on pans
with no sides or very low sides to allow heated air to circulate around the
food. Food baked on pans with a dark finish will cook faster.
2. Preheating is not necessary when cooking casseroles with Convection
Bake.
3. When using Convection Bake with a single rack, place oven rack in
position 2 or 3. If cooking on multiple racks, place the oven racks in
positions 2 and 4.
Conv
pad controls the Convection Bake feature. The oven
bake
circulation
during
Convection
Bake
Figure 1
4th Rack
position
3rd Rack
position
2nd Rack
position
1st Rack
position
Figure 2
Benefits of Convection Bake:
—Multiple rack baking.
—Some foods cook up to 30%
faster, saving time and energy.
—No special pans or bakeware
needed.
Air
INSTRUCTIONS PRESS DISPLAY
To set the oven for Convection Bake and
temperature to 375°F
1. Arrange interior oven racks and place food in oven.
2. Press
the display (Figure 3). If a Convection bake of 350°F is
needed, press
3. Press 3 7 5. "CONV BAKE" will keep flashing and
"375°" will appear in the display (Figure 4).
4. Press
will appear in the display (Figure 5).
Note: The display will show an icon of rotating fan within a square.
This rotating fan icon indicates when the Convection Fan is
operating. Electric Models: The convection fan and convection
element will start AS SOON AS the oven is set for Convection
Bake. Gas Models: Please allow up to 6 minutes for the
convection fan and convection element to activate.
Press
any time.
Conv
. "CONV BAKE" will flash and "350°" will appear in
bake
START
.
START
. "CONV BAKE" will stop flashing and the fan icon
Clear
Clear
to stop Convection Bake or cancel Convection Bake at
/Off
/Off
3
Conv
bake
7
START
Clear
Clear
/Off
/Off
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 3
DELAY
TIMED
5
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 4
DELAYDELAY
TIMED
DOOR
LOCKED
TIMER
CLEANCLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 5
8
Clear
/Off
Setting Oven Controls (continued)
3
START
Clear
/Off
3
5
START
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKEBAKE
WARMWARM
BROILBROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Setting Convection Roast
The CONV ROAST
pad combines a cook cycle with the convection fan and element to roast meats and poultry. Preheating is not
necessary for meats and poultry. Heated air circulates around the food from all sides, sealing in juices and flavors.
Foods are crispy brown on the outside while staying moist on the inside.
To set the Convection Roast feature (example: Meats to
cook at 375°F)
1. Arrange interior oven racks and place food in oven.
2. Press
(Figure 1).
3. Press
appear in the display (Figure 2).
Conv
roast
Conv
pad is designed to give optimum cooking performance for this feature. The Convection Roast
roast
INSTRUCTIONS PRESS DISPLAY
. "CONV ROAST" will flash and "350°" will be displayed
7 5. "CONV ROAST" will flash and "375°" will
Conv
roast
7
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
Figure 1
CONV
ROAST
BAKE
WARM
BROIL
PROBE
4. Press
. "CONV ROAST" and "375°" will appear in the display
(Figure 3). The convection fan icon will come on.
Press
Clear
to stop Convection Roast at any time.
/Off
Clear
/Off
Note: The display will show an icon of rotating fan within a square. This rotating fan icon
indicates when the Convection Fan is operating. Electric Models: The convection fan and
convection element will start AS SOON AS the oven is set for Convection Bake. Gas
Models: Please allow up to 6 minutes for the convection fan and convection element to
activate.
Roasting Rack Instructions (some models)
When preparing meats for convection roasting, use the broiler pan and insert along
with the roasting rack (if equipped). The broiler pan will catch grease spills and the
insert will help prevent grease splatters. The roasting rack will allow the heat to
circulate around the meat.
To prevent food from contacting the broil element and to prevent
grease splattering, DO NOT use the roasting rack when broiling.
1. Place oven rack on bottom or next to the bottom rack position. See Arranging
Oven Racks in the Before Setting Oven Controls section.
2. Place the insert in the broiler pan. The roasting rack fits on the insert allowing the
heated air to circulate under the food for even cooking and helps to increase
browning on the underside. Make sure the roasting rack is securely seated on
the insert in the broiler pan. DO NOT use the broiler pan without the insert. DO
NOT cover the insert with aluminum foil.
3. Position food (fat side up) on the roasting rack (See Figure 4).
4. Place the broiler pan on the oven rack.
Figure 2
Figure 3
Figure 4
9
Setting Oven Controls (continued)
Setting Convection Convert feature
Conv
The
set properly, this feature is designed to display the actual converted (reduced) temperature in display.
Convection Convert may ONLY be used with a Conv Bake, Timed Bake or a Delay Start (Delayed Timed Bake) setting.
When used with a Timed Bake or a Delayed Timed Bake setting, the Convection Convert feature will display a "CF" for
check food when the bake time is 75% complete (See Figure 3). At this time the oven control will sound 3 long beeps at
regular intervals until baking has finished. When the bake time has completely finished the control will display "End" and
will sound 3 long beeps every 30 seconds until the
To change from a normal bake recipe to a convection
bake recipe (example: changing a 400°F (204°C) normal
bake recipe to a convection bake recipe:
When the CONV BAKE mode is on at 400°F (204°C) (Figure 1), press
Conv
convert
in the display (for this example it is 375°F). A beep will sound once the
adjusted oven temperature is reached. The display will show "375°",
"CONV BAKE" and the fan icon (Figure 2).
CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When
convert
Clear
Clear
pad is pressed.
/Off
/Off
INSTRUCTIONS PRESS DISPLAY
DELAY
. "CONV BAKE" and the oven temperature adjustment will appear
Conv
convert
TIMED
DOOR
TIMED
DOOR
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 1
TIMER
CLEAN
Figure 2
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BROILBROIL
PROBE
BROIL
PROBEPROBE
Note: When using a Cook Time, the convection convert will not operate if
you have a timed bake under is 20 minutes.
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
Figure 3
CONV
ROAST
BAKE
WARMWARM
BROILBROIL
PROBEPROBE
10
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
WARM
BROIL
PROBE
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
WARM
BROIL
PROBE
Bake
time
Setting Oven Controls (continued)
START
Bake
time
START
Bake
time
Clear
/Off
Clear
/Off
START
Bake
time
3
0
START
Clear
/Off
Clear
/Off
Setting Timed Bake, Timed Convection Bake or Timed Convection Roast
The BAKE
Bake
or CONVECTION BAKE
Conv
or CONVECTION ROAST
bake
Timed Bake feature. The automatic timer of the Timed Bake feature will turn the oven OFF after cooking for the desired
amount of time you selected.
INSTRUCTIONS PRESS DISPLAY
To program the oven to begin baking immediately and to shut off
automatically (example: BAKE at 350°F for 30 minutes)
1. Be sure the clock is set for the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
Bake
3. Press
, "350°" will appear and "BAKE" will flash in the
Conv
and BAKE TIME
roast
Bake
pads control the
Figure 1
display (Figure 1).
4. Press
5. Press
. "BAKE" and "350°" will appear in the display (Figure 2).
. "TIMED" will flash; "BAKE", "- - - -" and "350°" will
appear in the display (Figure 3).
6. Enter the desired baking time by pressing 3 0 (Figure 4).
Note: Baking time can be set for any amount of time between 1
minute to 11 hours and 59 minutes.
7. Press
. Both the "TIMED" and "BAKE" icons will remain on
in the display (Figure 5). Once the Timed Bake feature has
started, the current time of day will appear in the display.
Note: After the Timed Bake feature has activated, press
to
display the bake time remaining in the Timed Bake mode. Once
Timed Bake has started baking, a beep will sound when the oven
temperature reaches the set temperature.
Press
Clear
when baking has finished or at any time to cancel the
/Off
Timed Bake feature.
Clear
/Off
CONV
BAKE
Figure 2
TIMED
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
Figure 3
CONV
ROAST
BAKE
BAKE
WARM
BROIL
PROBE
Figure 4
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 5
DELAY
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Figure 6
When the timed bake finishes:
1. "End" and the time of day will show in display. The oven will shut
off automatically (Figure 6).
2. The control will beep 3 times. The control will continue to beep 3
times every 30 seconds until
Clear
/Off
Use caution with the DELAYED TIME BAKE features. Use the automatic timer when cooking cured or
frozen meats and most fruits and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat or poultry,
should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour
before cooking begins, and should be removed promptly when cooking is completed. Eating spoiled food can result in
sickness from food poisoning.
is pressed.
11
Clear
/Off
Conv
bake
Bake
time
Start
time
START
Bake
time
3
START
Start
time
START
Bake
time
Clear
/Off
Clear
/Off
Setting Oven Controls (continued)
START
Bake
time
3
0
START
Start
time
5
0
START
Bake
time
Clear
/Off
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
WARM
BROIL
PROBE
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
WARM
BROIL
PROBE
DOOR
LOCKED
CLEAN
ROAST
WARM
PROBE
Setting Delayed Timed Bake, Delayed Timed Convection Bake or Convection Roast
The BAKE
Bake
or CONVECTION BAKE
,or CONVECTION ROAST
Conv
, BAKE TIME
roast
and START TIME
pads control the Delayed Time Bake feature. The automatic timer of the Delayed Time Bake will turn the oven on
and off at the time you select in advance. Note: If your clock is set for normal 12 hour display mode the Delayed Timed
Bake or Delayed Timed Convection Bake cycle can never be set to start more than 12 hours in advance. To set for
Delayed Timed Bake or Delayed Timed Convection Bake 12-24 hours in advance set the control for the 24 hour time of
day display mode.
INSTRUCTIONS PRESS DISPLAY
To program the oven for a delayed BAKE start time and to shut off automatically
(example: baking at 350°F, starting at 5:30 and baking for 30 minutes)
1. Be sure that the clock is set with the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
Bake
3. Press
. "350°" will appear and "BAKE" will flash in the display
(Figure 1).
4. Press
5. Press
. "BAKE" and "350°" will stay in the display (Figure 2).
. "TIMED" will flash, "- - - -" will appear and "BAKE" and
"350°" will remain in the display (Figure 3).
6. Enter the desired baking time using the number pads by pressing
Bake
Figure 1
Figure 2
0. "TIMED" will flash; "BAKE", "- - 30" and "350°" will appear
in the display (Figure 4). Note: Baking time can be set for any
amount of time from 1 minute to 11 hours and 59 minutes.
7. Press
. "TIMED", "BAKE" and "350°" will remain in the display
(Figure 5).
8. Press
. "DELAY" will flash in the display. Enter the desired start
time using the number pads 5 3 0 (Figure 6).
9. Press
. When Delayed Time Bake starts, "DELAY", "BAKE"
and the current time of day will appear in the display (Figure 7).
10. When the desired start time is reached, the fan icon appears in
display and "DELAY" disappears. Oven starts to bake at the
previously selected temperature (Figure 8).
Note: Once Delayed Time Bake has started, press
time remaining . Once the Delayed Timed Bake has started baking, a beep
will sound when the oven temperature reaches the set temperature.
Press
Clear
when baking has completed or at any time to cancel the
/Off
Delayed Time Bake feature.
When the set bake time runs out:
1. "End" will appear in the display and the oven will shut off
automatically (Figure 9).
2. The control will beep 3 times. The control will continue to beep 3
times every 30 seconds until
Clear
/Off
is pressed.
to display the bake
12
3
Clear
/Off
TIMED
TIMED
TIMED
TIMED
TIMED
TIMED
DOOR
TIMED
DOOR
DELAY
DELAY
DELAY
DELAY
LOCKED
DELAY
LOCKED
Figure 3
Figure 4
TIMER
Figure 5
Figure 6
Figure 7
TIMER
CLEAN
Figure 8
TIMER
CLEAN
Figure 9
CONV
CONV
ROAST
CONV
ROAST
BAKE
BAKE
BAKE
BAKE
BAKE
BAKE
WARM
BAKE
WARM
BROIL
BROIL
PROBE
BROIL
PROBE
START
Clear
/Off
START
Clear
/Off
Setting Oven Controls (continued)
Setting Broil
Broil
The
coverage. The Broil feature is preset to start broiling at 550°F; however, the Broil feature temperature may be set
between 400°F and 550°F. The broil pan and broil pan insert used together allow dripping grease to drain and be kept
away from the high heat of the oven broiler. DO NOT use the broil pan without the insert (See Figure 5). DO NOT
cover the broil pan insert with foil. The exposed grease could catch fire.
baking soda on the fire or use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and
water can cause a grease fire to spread and cause personal injury.
To set the oven to broil at the default setting (550°F):
1. Place the broiler pan insert on the broiler pan. Then place the food on
2. Arrange the interior oven rack and place the broiler pan on the rack.
pad controls the Broil feature. When broiling, heat radiates downward from the oven broiler for even
Should an oven fire occur, leave the oven door closed and turn off the oven. If the fire continues, throw
INSTRUCTIONS PRESS DISPLAY
TIMED
TIMED
DOOR
the broiler pan insert. DO NOT use the broiler pan without the insert.
DO NOT cover the broiler insert with foil. The exposed grease could
ignite.
Be sure to center the broiler pan directly under the broiler element.
Electric Oven Only: Make sure the oven door is in the broil stop
position (see Figure 4). Gas Oven Only: Close the oven door. For
optimum browning, preheat broil burner for 3-4 minutes before
adding food.
DOOR
TIMED
DOOR
DELAY
DELAY
LOCKED
LOCKED
DELAY
LOCKED
TIMER
TIMER
CLEAN
CLEAN
Figure 1
TIMER
CLEAN
Figure 2
CONV
CONV
ROAST
ROAST
CONV
ROAST
BAKE
BAKE
WARM
WARM
BAKE
WARM
BROIL
BROIL
PROBE
PROBE
BROIL
PROBE
3. Press
Broil
. "BROIL" will flash and "550°" will appear (Figure 1).
4. If a lower broil temperature is desired (minimum broil temperature
setting is 400°F), press the desired temperature before continuing to
step 5.
5. Press
. The oven will begin to broil. "BROIL" and "550°" will
appear in the display (Figure 2).
6. Broil on one side until food is browned; turn and cook on the second
side. Season and serve. Note: Always pull the rack out to the stop
position before turning or removing food.
7. To cancel broiling or if finished broiling press
Broiling Times
Use the following table for approximate broiling times. Increase or decrease broiling
times, or move the broiling pan to a different rack position to suit for doneness. If the
food you are broiling is not listed in the table, follow the instructions provided in your
cookbook and watch the item closely.
Electric and Gas Oven Broiling Table Recommendations
Food Rack Position Temp Cook Time Cook Time
Item from bottom Setting for ELECTRIC Oven Models For GAS Oven Models Doneness
Steak 1" thick 3rd or 4th 550° F 6:00 4:00 8:00 6:00 Rare
3rd or 4th 550° F 7:00 5:00 10:00 8:00 Medium
Pork Chops 3/4" thick 3rd 550° F 8:00 6:00 12:00 8:00 Well
Chicken - Bone In 2nd 450° F 20:00 10:00 25:00 15:00 Well
Chicken - Boneless 3rd 450° F 8:00 6:00 10:00 8:00 Well
Fish 3rd 500° F 13:00 n/a as directed as directed Well
Shrimp 2nd 550° F 5:00 n/a as directed as directed Well
Hamburger 1" thick 4th 550° F 9:00 7:00 12:00 10:00 Medium
3rd 550° F 10:00 8:00 14:00 12:00 Well
Clear
(Figure 3).
/Off
Broil
Clear
/Off
TIMED
DOOR
1st side 2nd side 1st side 2nd side
13
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
Figure 3
Electric Oven Only
Broil Stop Position
Figure 4
Figure 5
BAKE
WARM
BROIL
PROBE
Setting Oven Controls (continued)
Bake
time
Start
time
Oven
light
START
Clear
/Off
START
Bake
time
Start
time
START
Bake
time
Start
time
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOORDOOR
DELAY
LOCKEDLOCKED
TIMER
CLEAN
CONVCONV
ROASTROAST
BAKE
WARM
BROILBROIL
PROBEPROBE
To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays)
The BAKE TIME
only be used with the
and START TIME
Bake
pad. The oven temperature may be set higher or lower after setting the Sabbath feature
pads are used to set the Sabbath feature. The Sabbath feature may
(the oven temperature adjustment feature should be used only during Jewish Holidays), however the display will not
visibly show or provide any audible tones indicating whether the change occurred correctly. Once the oven is properly
set using Bake with the Sabbath feature active, the oven will remain continuously ON until cancelled. This will override
the factory preset 12-Hour Energy Saving feature.
If the oven light will be needed during the Sabbath, press
before activating the Sabbath feature. Once the oven
light is turned ON and the Sabbath feature is active, the oven light will remain ON until the Sabbath feature is turned
OFF. If the oven light needs to be OFF, be sure to turn the oven light OFF before activating the Sabbath feature.
IMPORTANT NOTES: It is not advised to attempt to activate any other program feature other than BAKE while the
Sabbath feature is active. ONLY the following key pads will function after setting the Sabbath feature; 0 to 9,
Bake
,
&
. ALL OTHER KEYPADS will not function once the Sabbath feature is properly activated.
INSTRUCTIONS PRESS DISPLAY
To Program the Oven to Begin Baking Immediately &
activate the Sabbath feature (example: baking at
350°F)
1. Be sure that the clock is set with the correct time of day.
2. Arrange the oven racks and place the food in the oven.
3. Press
4. Press
Bake
, "350°" appears in the display.
(Figure 1).
5. If a Timed Bake or Delayed Timed Bake is needed then enter
the time in this step. If not, skip this step and continue to step 7.
Refer to the Timed Bake / Delayed Timed Bake section for
complete instructions. Remember the oven will shut down after
completing a Timed Bake or Delayed Timed Bake and therefore
may only be used once during the Sabbath/Jewish Holidays. The
maximum delay time is 11 hours & 59 minutes.
6. The oven will turn ON and begin heating.
7. At the same time press and hold both the
and
pads for
at least 3 seconds. SAb will appear in the display (Figure 2). Once
SAb appears in the display the oven control will no longer beep or
display any further changes and the oven is properly set for the
Sabbath feature.
Bake
Figure 1
Figure 2
and
14
Setting Oven Controls (continued)
START
Clear
/Off
Bake
time
Start
time
Bake
time
Start
time
Clear
/Off
Bake
time
Start
time
To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays)
INSTRUCTIONS PRESS DISPLAY
Note: You may change the oven temperature once baking has
started by pressing
Bake
, the numeric key pads for the
temperature you want (example for 425°F press 4, 2, 5)
and then pressing
TWICE (for Jewish Holidays only).
Remember that the oven control will no longer beep when a
keypad is pressed or display any further changes once the
oven is set for the Sabbath feature.
8. The oven may be turned OFF at any time by first pressing
pad (this will turn the oven OFF only). To turn OFF the Sabbath
feature press and hold both the
and
pads for at least 3
and
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
Figure 1
CONV
ROAST
BAKE
WARM
BROIL
PROBE
seconds. This also turns off the oven. SAb will disappear from the
display (figure 1).
It is recommended that at any oven temperature change with the Sabbath feature activated be followed with 2 presses
of the START pad. This will insure the oven remains ON even if the attempt to set the oven temperature was lower or
higher than the oven control can accept. If the oven temperature is set incorrectly, the oven temperature will default to
170°F or 550°F. Try to set the desired oven temperature again.
Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not
turn back on automatically. The oven will remember that it is set for the Sabbath and the food may be safely removed
from the oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath.
After the
Sabbath observance turn OFF the Sabbath feature. Press and hold both the
seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further
assistance, guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at
http:\\www.star-k.org.
15
and
pads for at least 3
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Setting Oven Controls (continued)
Keep
Warm
Keep
Warm
START
Clear
/Off
Keep
Warm
START
Clear
/Off
Clear
/Off
Keep
Warm
START
Clear
/Off
Keep
Warm
START
Clear
/Off
Clear
/Off
Oven
light
Setting the Keep Warm Feature
The Keep Warm
pad turns ON the Keep Warm feature and will maintain an oven temperature of 170°F (77°C).
The Keep Warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3
hours the Keep Warm feature will shut the oven OFF. The Keep Warm feature may be used without any other cooking
operations or can be used after cooking has finished using BAKE, CONVECTION BAKE or CONVECTION ROAST.
The Keep Warm feature may be used with TIMED BAKE if you wish to have the Keep Warm feature turn ON
automatically when cooking has finished. The Timed Bake features require you to set start time and the amount of
cooking time. With this information the control can calculate the time when cooking will complete and can then start the
Keep Warm feature automatically.
INSTRUCTIONS PRESS DISPLAY
To set Keep Warm
1. Arrange interior oven racks and place food in oven.
2. Press
. "HLd" and "WARM" will appear in the display (Figure
1). Note: If no pad is touched within 25 seconds the request to turn
ON Keep Warm feature will be cancelled.
3. Press
4. To turn the Keep Warm OFF at any time press
. The oven icon will appear in the display (Figure 2).
.
Note: The Keep Warm feature will automatically turn OFF after 3
hours.
TIMED
DOOR
TIMED
DOOR
DELAY
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 1
TIMER
CLEAN
Figure 2
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
To set Keep Warm to turn ON automatically
1. Arrange interior oven racks and place food in oven. Set the oven
properly for Timed Bake or Delayed Timed Bake.
2. Press
Note: If no pad is touched within 25 seconds the request to turn
ON the Keep Warm feature and all functions previously
. (Figure 3)
Figure 3
programmed will be cleared.
3. Press
displayed (Figure 4). The Keep Warm mode is set to turn ON
. "HLd" will disappear and the temperature will be
Figure 4
automatically after Timed Bake has finished (See Figure 2).
4. To turn the Keep Warm feature OFF at any time press
.
Note: The Keep Warm feature will automatically turn OFF after 3
hours.
Pressing
at any time will stop all oven baking operations.
To turn ON/OFF the Oven Light
The oven light automatically turns ON when the oven door is opened. The oven light may also be manually turned ON
or OFF by pressing the
pad.
16
Oven Cleaning
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DELAY
TIMER
CONV
ROAST
BAKE
WARM
BROIL
PROBE
Speed
clean
Clean
Maxx
clean
Speed
clean
Clean
Maxx
clean
Clean
Speed
clean
Maxx
clean
START
Start
time
4
0
START
Clean
Speed
clean
Maxx
clean
START
Start
time
4
3
START
Self-Clean Cycle Time Length
The SPEED CLEAN
, CLEAN
and MAXX CLEAN
pads control the Self-Cleaning feature. If you are
planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven
door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to
complete. *It is recommend to use a
cycle (2 hour) for light soils, a
cycle (3 hour) for average soils, and a
cycle (4 hour) for heavy soils (to assure satisfactory results).
During the Self-Cleaning cycle, the outside of the range can become very hot to touch. DO NOT leave small
children unattended near the appliance.
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the
side of the oven when opening the door to allow hot air or steam to escape.
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and
avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
INSTRUCTIONS PRESS DISPLAY
To start an immediate Self-Cleaning cycle or to set a delay start time of 4:30 o'clock and shut
of automatically (example provided is a default 3 hour Self-Clean cycle):
1. Be sure the clock is set with the correct time of day, the oven is empty
and the oven door is closed.
2. Press
. "CLEAN" will flash and "3:00" HR will show in the display
(Figure 1). The control will automatically clean for a 3 hour period (default
self-cleaning cycle time). Note: If a 2 or 4 hour clean time is desired,
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
Figure 1
CONV
ROAST
BAKE
WARM
BROIL
PROBE
press
cleaning time based on the amount of soil: light, medium or heavy (* See
for 2 hour or press
for a 4 hour clean time. Set the
or
Figure 2
above).
3. Press
and the letters "CLn" will remain on in the display (Figure 2).
.The "DOOR LOCKED" icon will flash; "CLEAN" icon
DOOR
LOCKED
CLEAN
Figure 3
4. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will stop flashing and remain on.
Also, the oven icon will appear in the display (Figure 3).
Note: Allow about 15 seconds for the oven door lock to close.
NOTE: If the optional delay Self-Clean feature is needed, finish steps 5-7. If Self-Clean is started immediately
skip the remaining steps and continue with "When the Self-Clean
cycle is done" on the following page.
5. Press
. Enter the desired start time using the number pads
0 (Figure 4).
6. Press
. "CLn", "DELAY", "DOOR LOCKED" and "CLEAN" icons
3
TIMED
DOOR
TIMED
DOOR
DELAY
LOCKED
DELAY
LOCKED
TIMER
CLEAN
Figure 4
TIMER
CLEAN
Figure 5
CONV
ROAST
CONV
ROAST
BAKE
WARM
BAKE
WARM
BROIL
PROBE
BROIL
PROBE
will remain on (Figure 5).
7. The control will start the self-cleaning at the set start time, for the period
of time previously selected. At that time, the icon "DELAY" will go out;
TIMED
DOOR
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
DELAY
"CLn" and oven icon will appear in the display (Figure 6).
Figure 6
17
Oven Cleaning (continued)
Clear
/Off
Clear
/Off
TIMED
DELAY
TIMER
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
CONV
ROAST
BAKE
WARM
BROIL
PROBE
INSTRUCTIONS PRESS DISPLAY
When the Self-Clean Cycle is Completed
1. "Hot" will appear in the display with the time of day to indicate the
oven must cooled down before it can be used normally (Figure 1; or
Figure 2 if the clean cycle is used with the delay feature).
2. Once the oven has cooled down enough "Hot" message will
disappear, the oven door will unlock and "DOOR LOCKED" will
disappear from the display. The oven door can then be opened
(Figure 3).
DOOR
LOCKED
TIMER
CLEAN
Figure 1
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to
excessive smoke or fire in the oven:
1. Press
Clear
/Off
.
2. The oven door can only be opened after the oven has cooled down
for approximately 1 HOUR and "Hot" and "DOOR LOCKED" is no
longer displayed (Figure 3).
IMPORTANT NOTES when using the Self-Clean feature:
1. On some models, the Self-Clean feature will not operate whenever a radiant surface
remains ON.
2. On some models, starting a self-clean cycle will turn ON the Cooktop Lockout feature.
If it is the case the symbol will appear in the display (Figure 4) which will indicate
that the Cooktop Lockout feature is ON. The cooktop will remain locked until the Self-
Clean cycle has completed and the oven door has unlocked.
3. A Self-Clean cycle cannot be started if Oven Lockout feature is active.
4. If a Self-Cleaning Cycle has started but not finished and a power failure occurs, the
appliance may not have thoroughly cleaned. Once power is restored, the oven door
and the cooktop are unlocked. Then set for another Self-Clean cycle to finish.
5. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can
never be set to start more than 12 hours in advance. To set for a delayed SelfCleaning cycle 12-24 hours in advance set the control for the 24 hour time of day
display mode.
Clear
/Off
TIMED
DOOR
DOOR
DELAY
LOCKED
LOCKED
Figure 2
TIMER
CLEAN
Figure 3
CLEAN
Figure 4
CONV
ROAST
BAKE
WARM
BROIL
PROBE
18
TIMED
DOORDOOR
DELAY
LOCKEDLOCKED
TIMER
CLEAN
CONVCONV
ROASTROAST
BAKE
WARM
BROILBROIL
PROBEPROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOOR
DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST
BAKE
WARM
BROIL
PROBE
TIMED
DOORDOOR
DELAY
LOCKEDLOCKED
TIMER
CLEAN
CONVCONV
ROASTROAST
BAKE
WARM
BROILBROIL
PROBEPROBE
3
START
Clear
/Off
Clean
START
Clear
/Off
Adjusting Oven Temperature
3
0
START
Clear
/Off
3
0
Clean
START
Clear
/Off
START
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is cooking too hot or
too cool for the temperature you select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting, test a recipe by using a temperature
setting that is higher or lower than the recommended temperature. The baking results
should help you to decide how much of an adjustment is needed.
INSTRUCTIONS PRESS DISPLAY
To adjust the oven temperature higher
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broil temperature .
1. Press
Bake
for 6 seconds. 0° will appear in the display (Figure 1).
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F)
0 (Figure 2). The
temperature may be increased by as much as 35°F (19°C).
3. Press
will return to the time of day (Figure 3). Press
to accept the temperature change and the display
to reject the
change if necessary.
To adjust the oven temperature lower
1. Press
2. To decrease the temperature use the number pads to enter the
desired change. (Example -30°F) 3 0 and then press
much as 35°F (19°C).
3. Press
Bake
for 6 seconds. 0° will appear in the display (Figure 4).
(Figure 5). The temperature may be decreased by as
to accept the temperature change and the display
Bake
Bake
Figure 1
or
Figure 2
Figure 3
Figure 4
or
will return to the time of day (Figure 6). Press
change if necessary.
To Set the Oven Control Back To The Factory Default Settings
This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour
Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or
Normal Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0).
1. Press and hold 7 until the first single beep sounds (about 6 seconds)
2. After the first beep, press
pad once. All the setting are now set to the original factory default.
Clear
to reject the
/Off
19
Clear
/Off
Figure 5
Figure 6
Notes
20
Loading...