OPERAOPERA
OPERAOPERA
OPERA
TING INSTRUCTIONSTING INSTRUCTIONS
TING INSTRUCTIONSTING INSTRUCTIONS
TING INSTRUCTIONS
P/N 134752900A (0610)
Printed in U.S.A.
Before Operating Your
Washer
Read your Washer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best washing results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your Washer Owner's
Guide before operating this appliance.
Operating Steps
Read Washing Procedures in your Owner's Guide.
It explains these operating steps in detail.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Add the measured amount of detergent to
wash tub before adding the laundry load.
5. If desired, add liquid bleach to bleach
dispenser. DO NOT pour bleach directly onto
the load.
6. If desired, add liquid fabric softener to fabric
softener dispenser. DO NOT pour fabric
softener directly onto wash load.
7. Add laundry load loosely to wash tub. Dry
load should not be higher than top of agitator
vanes. For best results, DO NOT overload.
8. Select the wash cycle and settings according
to type, size and soil level of each load.
9. Close lid and pull out Cycle Selector knob to
start washer.
The washer will fill with water but
will not agitate or spin with the lid open.
To stop the washer, push in the Cycle Selector
knob. To change a cycle, push in the Cycle
Selector knob and turn it clockwise to the desired
setting. Pull out the knob to restart the washer.
10. Remove items at end of cycle. Wait about 2-3
minutes for safety lid lock to release.
.
Cycle Selection
Push in and turn the Cycle Selector knob
clockwise to the desired cycle. For best
results, follow the washing instructions on
the fabric care labels
The Whites, Colors and Knits/Delicates cycles
progress through wash agitation, drain and spin
with a spray rinse, rinse agitation, and a final
spin.
Whites Cycle
This cycle provides up to 15 minutes of normal
agitation and a fast spin for most fabrics.
Power Spin provides12 minutes of spin for maximum
removal of water. This conserves energy by reducing
drying time.
Colors Cycle
This cycle provides up to 12 minutes of normal
agitation and a fast spin for cottons and blends
with a no-iron finish. A cool down spray rinse
helps reduce wrinkling.
Select the Perm Press Prewash setting to help
loosen soil and remove stains before washing. Add
recommended amount of detergent and other laundry
products desired to tub. Add load.
Select a cold
water rinse and appropriate load size.
Load will
agitate 4 minutes, drain and spin.
Follow Perm Press
Prewash with a complete Colors cycle and a half
dose of detergent.
SMALL
(LOW)
LARGE (FULL)
12
8
REGULAR/WHITES
LOAD SIZE (WATER LEVEL)
HOT
COLD
WARM
WARM
COLD
COLD
WARM
COLD
WASH/RINSE TEMPERATURE
SOAK/
PREWASH
PERM
PRESS/COLORS
12
8
4
RESET
MEDIUM
RINSE
FINAL SPIN
*
*
SOAK
PREWASH
POWER SPIN
6
KNITS/
DELICATES
PERM PRESS PREWASH
*
SOME MODELS
15
4
COLORS
WHITES
SUPER
•
•
•
WARM
COLD
COLD
COLD
HOT
COLD