Frigidaire FSE-FSG748GF, FSEC-FSGC748GF User Manual

OPERATING INSTRUCTIONS

FSEC/FSGC748GF

FSE/FSG748GF

MOISTURE SENSOR

INTERIOR DRUM LIGHT

Before Operating Your Dryer

Read your dryer Owner's Guide. It has important

safety and warranty information. It also has many

AUTOMATIC

PERM PRESS

NORMAL DRY

TIMED DRY

REGULAR

TIMED DRY

REGULAR

TIMED DRY

REGULAR

6. Turn cycle selector clockwise to desired setting.

7. Start dryer. Turn the Turn to Start control clockwise
to ON. Hold for 1-2 seconds and release.

NORMAL

DRY

AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or blankets,
or to dust draperies.

AUTOMATIC

REGULAR

NORMAL

DRY

AUTOMATIC

AUTOMATIC

DELICATE

DELICATE

suggestions for best drying results.

8. When Cycle Signal control is on, a signal will

To reduce the risk of fire, electric shock,
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your dryer Owner's Guide before
operating this appliance.

sound at the end of the cycle.

9. Remove items immediately and hang or fold.

10. Clean lint screen after every load.

Cycle Selection

Turn cycle selector clockwise to desired cycle and
setting.

Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble

Operating Steps

Read Drying Procedures in your Owner's Guide. It
explains these operating steps in detail.

1. Prepare items for drying.

2. Check that lint screen is clean and in place.

3. Load the dryer. If desired, add a dryer fabric

Temperature Selection

Always follow directions on fabric care labels.

To avoid fire hazard, do not use heat to

dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
Air Fluff-No Heat setting only.

during the cool down period. This reduces wrinkling and
makes items easier to handle during unloading.

Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or gas
pressure can also affect drying time.

softener sheet.

4. Close the dryer door.

5. Set Dry Temperature and Cycle Signal controls.

The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT, and KNITS/DELICATES-LOW HEAT temp-erature
settings may be used with any cycle setting. The AIR
FLUFF-NO HEAT setting can be used only in the Timed

Dry cycle.

Printed in U.S.A. P/N 131713000 (9803)

" Cut along this edge to separate English from other languages. "

(continued, reverse side)

AUTOMATIC

PERM PRESS

NORMAL DRY

NORMAL

DRY

AUTOMATIC

REGULAR

NORMAL

DRY

MOISTURE SENSOR

INTERIOR DRUM LIGHT

Cycle Selection (continued)

Automatic Regular Cycle

This cycle is best for cotton items that can be tumble
dried. Drying time is determined automatically at the
temperature selection of your choice.

• Set cycle selector on NORMAL DRY.

• For items requiring more drying time, set cycle selector
on MORE.

• For items requiring less drying time, set cycle selector
on LESS.

Automatic Delicate Cycle

This cycle is best for knit and delicate items. Drying time
is determined automatically at the temperature selection
of your choice.

• Low heat is suggested for knit and delicate items.

• Set cycle selector on NORMAL DRY.

• For items requiring more drying time, set cycle selector
on MORE.

• For items requiring less drying time, set cycle selector
on LESS.

• If the dried load cannot be removed promptly, the
cycle selector will advance to the Press Saver setting.

TIMED DRY

REGULAR

TIMED DRY

REGULAR

• Unheated tumbling continues during the Press Saver
for 22 minutes to help reduce wrinkling.

• When the Cycle Signal is on, it will sound briefly
every 5 minutes as a reminder to remove the load.

Timed Dry Regular Cycle

This cycle provides up to 65 minutes of drying time at the
temperature selection of your choice.

Automatic Perm Press Cycle

This cycle is best for permanent press items. Drying time
is determined automatically at the temperature selection
of your choice.

• Medium heat is suggested for permanent press items.

• Set cycle selector on NORMAL DRY.

• For items requiring more drying time, set cycle selector
on MORE.

• For items requiring less drying time, set cycle selector
on LESS.

• If the dried load cannot be removed promptly, the
cycle selector will advance to the Press Saver setting.

• Unheated tumbling continues during the Press Saver
for 22 minutes to help reduce wrinkling.

AUTOMATIC

AUTOMATIC

DELICATE

DELICATE

• When the Cycle Signal is on, it will sound briefly
every 5 minutes as a reminder to remove the load.

Energy Saving Tips

• Keep the lint screen clean and exhaust the dryer
correctly.

• Sort laundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.

• Dry only full loads. Single items and small loads usually
take longer to dry.

• Avoid overloading, adding wet items to a partially dry
load, and overdrying.

• Dry one load after another to take advantage of a
warm dryer.

• Opening the door needlessly causes warm air to
escape, which prolongs drying time.

• If possible, use the dryer on low humidity days.

• Install the dryer in an area where the room temperature
is at least 45°F (7°C).

P/N 131713000 (9803)