Frigidaire FRT22INLHC2 User Manual

Product Registration ....................... 2

Versión en español.......................... 2

Important Safety Instructions ......... 2

First Steps....................................... 3

Energy Saving Ideas....................... 4

Setting the Controls ........................ 4

Temperatures ............................. 4

Moisture Reduction Switch ........ 4

Fresh Food Storage......................5-6

Care and Cleaning ....................... 6-7

Automatic Ice Maker.................... 7-8

Removing Handles & Doors............ 8

Handle, Door T rim & Door Removal

Instructions ................................ 9-10

Avoid Service Checklist .......... 11-13

Normal Operating Sounds............. 13

Warranty........................................ 14

Service Information in Canada ..... 1 5

P/N 218992002 (0101)

Product Registration

Versión en español

Si desea obtener una copia en español de
este Manual del Usuario, sírvase escribir a
la dirección que se incluye a continuación.
Solicite la P/N 218992001.

Spanish Owner's Guides
Electrolux Home Products
P.O. Box 212378

Augusta, GA 30917

Record the Model Number and Serial Number of this refrigerator in the space
provided below. These numbers are found on the serial plate located on the top left
wall of the refrigerator compartment.

Model Number:
Serial Number:

Register Your Product

The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,
signed and returned to Electrolux Home Products.

Important Safety
Instructions

Proper Disposal of

Your Refrigerator/Freezer

DANGER

Child entrapment and suffocation are
not problems of the past. Junked or
abandoned refrigerators or freezers are
still dangerous — even if they will sit for
"just a few days." If you are getting rid of
your old refrigerator or freezer, please
follow instructions below to help prevent
accidents.
BEFORE YOU THROW AWAY YOUR
OLD REFRIGERATOR/FREEZER:

* Take off

doors.

* Leave

shelves
in place,
so
children
may not
easily
climb
inside.

Avoid fire hazard or
electric shock. Do not use an extension
cord or an adapter plug. Do not remove
any prong from the power cord.

Risk of child entrapment.

Read all instructions before using this refrigerator.

For Your Safety

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. Read product labels for flammability and other warnings.

Child Safety

• Destroy carton, plastic bags, and any exterior wrapping material immediately
after the refrigerator is unpacked. Children should never use these items for play.
Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may
become airtight chambers and can quickly cause suffocation.

• Remove all staples from the carton. Staples can cause severe cuts and destroy
finishes if they come in contact with other appliances or furniture.

• An empty, discarded ice box, refrigerator or freezer is a very dangerous attraction
to children. Remove the door of any appliance that is not in use, even if

it is being discarded.

Electrical Information

These guidelines must be followed to ensure that safety mechanisms in the
design of this refrigerator will operate properly.

• The refrigerator must be plugged into its own 115 Volt, 60 Hz, AC only
electrical outlet. The power cord of the appliance is equipped with a 3-prong

grounding plug for your protection against shock hazards. It must be plugged
directly into a properly grounded 3-prong receptacle. The receptacle must be
installed in accordance with local codes and ordinances. Consult a qualified
electrician. Do Not Use An Extension Cord Or An Adapter Plug.

• If voltage varies by 10 percent or more, performance of your refrigerator may be
affected. Operating the refrigerator with insufficient power can damage the
compressor. Such damage is not covered under your warranty. If you suspect your
voltage is high or low, consult your power company for testing.

• To prevent the refrigerator from being turned off accidentally, do not plug the unit
into an outlet controlled by a wall switch or pull cord.

• Do not pinch, knot, or bend the power cord in any manner.

© 2001 White Consolidated Industries, Inc.

All rights reserved.

Other Precautions

• Never unplug the refrigerator by pulling on the power cord. Always grip the plug
firmly and pull straight out from the receptacle.

• To avoid electrical shock, unplug the refrigerator before cleaning and before
replacing a light bulb. Note: Turning the control to OFF turns off the compressor, but
does not disconnect power to the light bulb or other electrical components.

• Do not operate the refrigerator in the presence of explosive fumes.

• If the refrigerator has an automatic ice maker, avoid contact with any moving parts.

2

First Steps

(Figure 1)

This Owner’s Guide provides specific operating instructions for your model. Use the
refrigerator only as instructed in this Owner’s Guide. Before starting the refrigerator,

follow these important first steps.
Location

• Choose a place that is near a grounded electrical outlet. Do Not use an
extension cord or an adapter plug.

• If possible, place the refrigerator out of direct sunlight and away from the
range, dishwasher or other heat sources.

• The refrigerator must be installed on a floor that is level and strong enough to
support a fully loaded refrigerator .

• Consider water supply availability for models equipped with an automatic ice
maker.

Installation

• Do not install the refrigerator where temperature will drop below 60°F (15°C)
or rise above 110°F (43°C).The compressor will not be able to maintain proper
temperatures.

• Allow space around the unit for good air circulation. Leave a 1 inch (25 mm)
space behind and a 3 inch (75 mm) space above the refrigerator for adequate
circulation.

• In a recessed installation, allow an extra 1/2 inch (10-15 mm) on each side, for
ease of installation.

• For best circulation, elevate the unit 1 inch (25 mm) from the floor, especially
if the floor is carpeted.

Replacing Toe Grille

T o Remove Toe grille: Grip sides of T oe
Grille and pull straight off.
T o Replace T oe Grille: Line up clips with
holes and push straight on.

(Figure 2)

Door Opening

The doors should open to allow easy access to a counter when removing food.

• Do not position the refrigerator so you have to walk around the refrigerator
doors.

• Reverse the doors, if necessary . See Door Reversal Instructions.

Leveling

All four corners of refrigerator must rest firmly on a solid floor .

To adjust front rollers:

1. Open refrigerator door and r emove Toe Grille. (Figure 1)

2. Use an adjustable wrench to adjust rollers. (Figure 2)

3. Turn Roller Adjusting Bolt clockwise to raise and counter-clockwise to lower.
Raise the front of cabinet enough so doors will close freely when opened
halfway.

4. Level cabinet side to side.

5. Replace Toe Grille. (Figure 1)

Cleaning

• Wash the inside, all removable parts, and the outside with mild detergent and
warm water. Wipe dry. Do Not use harsh cleaners on these surfaces.

• Do not use razor blades or other sharp instruments that can scratch appliance
surface, when removing adhesive labels. Any glue left from tape or energy
label can be removed with a mixture of warm water and mild detergent, or
touch residue with sticky side of tape already removed.

• Do not remove the Serial Plate.

3

Energy Saving Ideas

• Install the refrigerator in the coolest part of the room, out of direct sunlight and
away from heating ducts or registers. Do not place the refrigerator next to
heat-producing appliances such as a range, oven or dishwasher. If this is not
possible, a section of cabinetry or an added layer of insulation between the
two appliances will help the refrigerator operate more ef ficiently.

• Level the refrigerator so the doors close tightly.

• Refer to this Owner's Guide for the suggested refrigerator settings.

• Periodic cleaning of the condenser will help the refrigerator run more
efficiently. See “Outside” in the Care and Cleaning section.

• Do not overcrowd the refrigerator or block cold air vents. Doing so causes the
refrigerator to run longer and use more energy. Shelves should not be lined
with aluminum foil, wax paper or paper toweling. Liners interfere with cold air
circulation, making the refrigerator less efficient, which could cause food
spoilage.

• Cover foods and wipe containers dry before placing them in the refrigerator.
This cuts down on moisture build-up inside the unit.

• Organize the refrigerator to reduce door openings. Remove as many items as
needed at one time and close the door as soon as possible.

Setting the Controls

G05C0086

Refrigerator Control

Freezer Control

Cool Down Period

To ensure safe food storage, allow the refrigerator to operate with the
doors closed for a least 8 to 12 hours before loading with food.

Refrigerator & freezer controls

Note: When first setting the controls or when changing a setting, wait 24

hours for the temperature to stabilize before making additional changes.

Temperatures

• After 24 hours, adjust the controls as needed. Adjusttemperatures one
increment at a time.

• For colder temperatures, turn the dial a notch towards COLDER.

• For warmer temperatures, turn the dial a notch towards WARMER. The
temperature will increase, but not necessarily by 1,2, or 3°.

Turning the refrigerator control may change temperatures in both compartments. For
example, if the refrigerator control is turned to a colder setting, the freezer control
may have to be adjusted to a warmer one. Turning the freezer control will change
only the freezer temperature.

To maintain temperatures, a fan circulates air in the refrigerator and freezer
compartments. For good circulation, do not block cold air vents with food items.

IMPORTANT: If the refrigerator control is turned to OFF, cooling stops in both
compartments.

Moisture Reduction Switch

Moisture Reduction Switch (some models)

If moisture forms on the metal between the two doors, set the Moisture Reduction
Switch (located on the control box in the refrigerator compartment) to the “ON”
position. A heater will warm the surface and allow moisture to evaporate.

4

Fresh Food Storage

Cantilever Shelf

Tall Bottle Retainer

Bin Snugger

Shelf Adjustment

Refrigerator shelves are easily adjusted to suit individual needs.
Some models have sliding shelves, others have cantilever
shelves. Before adjusting shelves, remove all food. The shipping
clips that stabilize the shelves for shipping may be removed and
discarded.
To adjust cantilever shelves (shelves supported at the rear of the
refrigerator), lift the back of the shelf up and out. Replace shelf
by inserting hooks at rear into slots. Lower and lock into position.

SpillSafe

TM

glass shelves (some models) catch and hold accidental
spills. In some models, the SpillSafeTM shelves slide out for easy
access to food and fast cleaning. The shelves slide out
independently of the cantilever brackets. Just pull front of shelf
forward. Shelf can be extended as far as stopper will allow.

Door Storage

Door bins and shelves provide convenient storage of jars, bottles, and cans. Items
used often are available for quick selection.

The door bins can be moved to suit individual needs. Remove bins by lifting straight
up. Place bins in the desired position and lower over the supports.

The Dairy Compartment(s) is warmer than the general food storage section and is
intended for short term storage of cheese, spreads, or butter.

T all Bottle Retainer (some models)

The Tall Bottle Retainer keeps tall containers in the bin from falling forward when
opening or closing the refrigerator door. To install, hold the retainer at the top, and
slide it over the outside wall of the bin, as shown. Note that the retainer works best
with the use of a bin snugger.

Micro-Serve Dish Tray

HIGHER

N

O

C

Y

IT

ID

M

U

H

S

E

L

B

A

T

E

G

E

V

FRESH FRUITS & VEGETABLES

Humidity Control

Micro-Serve Dishes

R

E

LOW

ITS

U

R

F

L

O

R

T

Micro-Serve Dishes (some models)

Food can be stored, cooked*, and served in Micro-Serve Dishes provided in some
models. These dishes slide easily into their own tray, which hangs below a door gallon
bin as shown below, conveniently freeing shelf space for other items. Note: Do not
hang tray below the bin in front of the ice maker.

* Remove plastic lid before cooking. Lid is intended for storage only.

Crispers

The Crispers, located under the bottom refrigerator shelf, are designed for storing
fruits, vegetables, and other fresh produce. Wash items in clear water and remove
excess water before placing in the Crispers. Items with strong odors or high moisture
should be wrapped before storing.

The Humidity Controls allow you to adjust the humidity within the Crisper. This can
extend the life of fresh vegetables which keep best in high humidity. Leafy
vegetables, however, keep best when stored with the Humidity Control set on high
moisture, or in a drawer without a Humidity Control. This keeps incoming air to a
minimum and maintains maximum moisture content.

Wine Rack (some models)

The Wine Rack stores bottles of wine, or 2-liter plastic bottles of juice or
soda pop. To install, slide the wine rack onto the shelf with the curve facing
in. To remove, slide the wine rack out.

Wine Rack

5

Fresh Food Storage

(continued)

Chilled Air Control

Air Outlet Box

Hole Cover

Hole cover and air duct
slide into grooves on
bottom of air outlet box.

Air Duct

Lower portion of
air duct slides up
or down.

Adjusting the Chilled Air Duct

Meat Keeper (some models)

The temperature in the Meat Keeper drawer can be made colder than the rest of the
refrigerator compartment by adjusting the Chilled Air Control. Meat will be partially
frozen and may be kept fresh longer than if stored on a refrigerator shelf.

Before placing items in the Meat Keeper, follow these steps to keep the meat fresh:

1. Carefully handle meat with clean hands and always keep the compartment
clean.

2. Store meat in its original wrapper. If necessary, overwrap in plastic wrap or foil
to prevent drying. Wrap fish tightly to prevent odor transfer to other foods.

3. If spoilage ever occurs, disinfect the compartment with liquid chlorine bleach
following label directions. Then, rinse with a solution of baking soda and water.
Rinse with clear water and dry.

Adjustable Chilled Air Duct (some models)

The Chilled Air Duct, which distributes cold air to the Meat Keeper drawer, can be
adjusted to accommodate repositioning of the shelf. However, the shelf has a limited
range of positions in which the Chilled Air Duct will reach.

The Chilled Air Duct can also switch sides, should you wish to move the split cantilever
shelf. To change sides:

1. Remove the Meat Keeper drawer and shelf. Grasp the air duct near top and slide
toward you until duct is free from grooves.

2. Slide off hole cover on opposite side. Insert the lip of the air duct in grooves of
new hole and slide back.

3. Slide hole cover over original hole.

4. Replace shelf and insert drawer.

Care and Cleaning

Damp objects stick to cold
metal surfaces. Do not touch refrigerated
surfaces with wet or damp hands.

To avoid damage and help
the refrigerator run as efficiently as
possible, clean the condenser and air
vents periodically.

Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills
immediately and clean both sections at least twice a year. Never use metallic scouring
pads, brushes, abrasive cleaners or strong alkaline solutions on any surface. Do not
wash any removable parts in a dishwasher.

Always unplug the power cord from the wall outlet before cleaning. Turning
the refrigerator control to OFF does not disconnect power to the controls, light bulb,
or other electrical components.

Inside

Wash inside surfaces of the refrigerator and freezer with a solution of 2 tablespoons
baking soda in 1 quart warm water. Rinse and dry thoroughly. Be sure to wring

excess water out of sponge or cloth before cleaning around the controls, light
bulb, or any electrical parts.

Wash removable parts with baking soda solution or mild detergent and warm water.
DO NOT USE HARSH CLEANERS ON THESE SURFACES. Rinse and dry thoroughly.
Clean the door gaskets with mild suds, rinse with clear water and wipe dry. Do not
use razor blades or other sharp instruments which can scratch the appliance surface
when removing adhesive labels. Any glue left from the tape or energy label can be
removed with a mixture of warm water and mild detergent, or, touch the residue with
the sticky side of tape already removed. DO NOT REMOVE THE SERIAL PLATE.

Outside

Wash the cabinet and handles with warm water and mild liquid detergent. Rinse well
and wipe dry with a clean soft cloth. Do not use commercial household cleaners,
ammonia, or alcohol to clean handles.
Clean stainless steel (some models) front and handles with hot soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Cleaners made especially for stainless steel,
such as Sheila Shine, trademark of Sheila Shine, Inc., Stainless Steel Magic,
trademark of Magic American Corp., or similar products are suggested. Always follow
manufacturer's instructions. Wash the rest of the cabinet with warm water and mild

6

Care and Cleaning

(continued)

liquid detergent. Rinse well, and wipe dry with a clean soft cloth.
Remove any dust or dirt from the front of the toe grill using a vacuum cleaner with

its dusting tool attachment. Remove the toe grill by pulling it straight out. While the
grill is removed, vacuum the backside of the grill and wipe with a sudsy cloth or
sponge. Periodically clean the condenser (black tubes and wires beneath the
refrigerator, behind the toe grill). Do not allow lint or dust to accumulate on the coils.
Insert a long handled brush or vacuum attachment between the two coils to bring the
lint forward. To replace the toe grill, line up tabs with holes and push grill straight on.

Use caution when cleaning in the area of the coils. Surfaces there

may be sharp.

The air vents on the lower access panel at the rear of the refrigerator should be cleaned
periodically. Clean the vents by using a vacuum cleaner with its dusting tool
attachment. When moving the refrigerator, pull straight out. Do not shift the
refrigerator from side to side as this may tear or gouge the floor covering. If the
refrigerator has an automatic ice maker, be careful not to move the refrigerator

beyond plumbing connections.

Replacing the Light Bulb

To replace the light bulb:

1. Unplug the refrigerator.

2. Wear gloves as protection against possible broken glass.

3. Replace old bulb with an appliance bulb of the same wattage.

4. Remember to plug the refrigerator back in.

Automatic Ice Maker

V acation and Moving Tips

Short vacations: Leave the refrigerator operating during vacations of 1 to 3 weeks.

Use up all perishable items from the refrigerator section. Wrap and store other items
in the freezer. If the unit has an automatic ice maker, turn off the ice maker.

Long vacations: Remove all food and ice if you will be gone 1 month or more. Turn

the refrigerator control to OFF and disconnect the power. If the unit has an
automatic ice maker, turn off the ice maker and turn the water supply valve to the
closed position. Defrost and clean the interior thoroughly. Leave both doors open
to prevent odor and mold buildup. Block open if necessary.

Moving: When moving the refrigerator, follow these guidelines to prevent damage:

• Remove all food and other items from both the refrigerator and freezer
compartments. Empty the ice storage bin. Defrost and clean the interior
thoroughly.

• If a hand truck is used in moving, load the refrigerator from the side.

• Turn front rollers as far up as possible. This will protect them during sliding or
moving.

• The cabinet should be well padded and handled with care. DO NOT DROP.

If your refrigerator has an automatic ice maker, it will provide a continuous supply of
ice for normal use. The automatic ice maker is an optional accessory which may be
installed in most models at any time. Call your local dealer for installation.

After the plumbing connections have been completed, the water supply valve must
be opened. Place the ice container under the ice maker, pushing it as far back as
possible. Lower the wire signal arm to its “down” or ON position. Because of new
plumbing connections, the first production of ice cubes may be discolored or have an
odd flavor. These should be discarded until the cubes made are free of discoloration
and taste.

Wire

Signal Arm

Remember, water quality
determines your ice quality. It is best to
connect the ice maker to water that is not
softened. Chemicals from a malfunctioning
softener can damage the ice maker. If ice
maker is connected to soft water, ensure
the softener is maintained and working
properly.

7

Automatic Ice Maker

(continued)

To stop the ice maker, lift the wire signal arm until it clicks and locks in the “up” or

OFF position. The ice maker turns off automatically when the ice container is full. If your
model has an adjustable freezer shelf, place the shelf so the wire signal arm will hit the
ice when the ice container is full.

Ice maker tips

1. Ice cubes stored too long may develop an odd flavor. Empty the container and
be sure the wire signal arm is in its “down” or ON position. The Ice Maker will
then produce more ice.

2. Occasionally shake the container to keep ice separated.

3. Keep the wire signal arm in its “up” or OFF position untilthe refrigerator is
connected to the water supply or whenever the water supply is turned off.

4. Certain sounds are normal when the Ice Maker is operating. They are:

• Motor operation

• Ice being loosened from the tray

• Ice dropping into the storage bin

• Running water

• Water valve opening or closing
For more information on these operations, see Normal Operating Sounds.

5. Wash ice container in warm water with mild detergent. Rinse well and dry.

6. Stop the Ice Maker when cleaning the freezer or for short vacations.

7. If the Ice Maker is to be turned off for a long period of time, turn the water
supply valve to the closed position.

8

Door Handle, Door Trim
and Door Removal
Instructions

If it is necessary to move the refrigerator through narrow doorways or you
want to replace the door trim, door handle or door, follow these steps. Prior

to removing the doors, turn the refrigerator control to OFF. Remove all food, bottles,
and other items from the door. Begin with freezer door. Completely remove one
door before beginning the other.

Use care when using tools near surface of stainless steel doors

to avoid scratching.

Freezer Door

Washer

Hinge Pin

Hinge

Washer

Screws

1. To remove freezer door: Snap off
hinge cover at top of cabinet. With the
freezer door closed, remove the three
screws attaching upper hinge to cabinet.
Note: Hinge has a minimal spring load.
Hold bracket when removing last screw.
Lift the hinge up and off. Be sure to save

screws and hinge for reassembly later.

Hinge Pin

2. Open the freezer door enough to allow
it to be lifted off the center hinge. With the
refrigerator door closed, remove center
hinge pin. Hinge pin may stick in spin
bearing. Use pliers to remove hinge pin.
(Note the arrangement of the upper and
lower washers on the hinge pin. The
washers must be assembled later in the
same manner.)

3. To remove refrigerator door: Open
refrigerator door enough to allow door to be
lifted off the lower hinge. Remove the two
screws attaching the center hinge. The third
outermost screw under the center hinge
should be left in place. Save hinge, pin,

and washers for reassembly later.

Washer

Hinge

Bolt

4. To remove lower hinge: Remove the
toe grille from front of refrigerator by pulling
straight forward. Remove the two hex head
bolts attaching the lower hinge. Save the

hinge, bolts and washer(s) for
reassembly later.

5. To remove freezer door trim and
handle: Remove the two screws attaching

the handle to the bottom of the freezer
door. Remove short trim piece by sliding the
trim straight up and off of handle bracket.
Remove the screw attaching the top of the
handle to door. Reattach handle to bottom
of door. Slide the trim piece straight down
onto handle bracket.

9

Door Handle, Door Trim
and Door Removal
Instructions (continued)

Washer

Hinge

Bolt

Refrigerator Door

6. To remove refrigerator door trim and
handle: This model has a medium length trim

piece which continues from the bottom of the
handle to approximately five inches down. The top
of the trim attaches to the handle bracket. An
adhesive "trim lock" is positioned about one half
inch down from the bottom of the handle. The
bottom of the trim is held in place by either an
adhesive trim lock, or a trim lock with two prongs
inserted into a hole on the face of the door.
Remove the trim by gently pulling the trim lock
areas out and away from the door. When the trim
is free from the door, slide the trim straight down
and away from the handle bracket.

For models with short handle trim, remove by
sliding the trim straight down and off of handle
bracket.

To remove handles: Remove the three screws
attaching the handle to the refrigerator door.

7. To reinstall refrigerator door:

Bolt lower hinge to cabinet. Install
washer on the lower hinge pin.
Replace toe grille by pushing straight
on.

8. Install center hinge and secure to
cabinet as shown, using the screws you
saved earlier. Install refrigerator door
on lower hinge pin. Align door with
edge of cabinet. Hold the door on front
of cabinet.

10. Assemble upper hinge to top of
cabinet and door. Do not completely
tighten screws.

Check door alignment. Space
between door and cabinet should be
3/4" at top hinge, the width of an
ordinary penny.

Return food, bottles, and other articles
to doors. Additional adjustment may
be necessary after loading the door
shelves. Turn the refrigerator

control on and to the previous
setting.

To reattach trim: Slide both trim locks out of trim.

Insert the new adhesive trim locks contained in
your literature pack.

NOTE: Trim locks must be removed and installed
by sliding OVER the two donut shaped areas. Install
trim to handle by sliding up over bottom of handle.
Carefully align trim and press down at trim lock
locations. Use rubbing alcohol to remove any
adhesive residue from old trim lock location(s).

For models with short handle trim, slide the trim
straight up onto handle bracket.

9. To reinstall freezer door: Place
original washer over hole in
refrigerator door and line up hole in
center hinge. Insert hinge pin through
both holes. Place washer on hinge pin,
then position freezer door on center
hinge.

10

Avoid Service Checklist

Before calling for service, review this list. It may save you both time and expense.
This list includes common occurrences that are not the result of defective
workmanship or materials in this appliance.

OCCURRENCE

RUNNING OF REFRIGERATOR

Refrigerator compressor does not run.

Refrigerator runs too much or too
long.

SOLUTION

Refrigerator control is off. Set refrigerator control. See Setting the Controls.
Refrigerator is in defrost cycle. This is normal for a fully automatic defrosting refrigerator. The defrost

cycle occurs periodically, lasting about 20 minutes.
Plug at wall outlet is disconnected. Make sure plug is tightly pushed into outlet.
House fuse has blown or circuit breaker has tripped. Check and/or replace fuse with a 15 amp time-delay

fuse. Reset circuit breaker.
Power outage. Check house lights. Call local electric company.
Room or outside weather is hot. It is normal for the refrigerator to work longer under these conditions.
Refrigerator has recently been disconnected for a period of time. It takes about 8-12 hours for the

refrigerator to cool down completely.
Automatic ice maker is operating (some models). Operation of the ice maker causes the refrigerator to

run slightly more.
Doors are opened too frequently or too long. Warm air entering the refrigerator causes it to run more.

Open the doors less often.
Refrigerator or freezer door may be slightly open. Make sure refrigerator is level. Keep food and

containers from blocking door. See Occurrence section OPENING/CLOSING OF DOORS/DRAWERS.

Refrigerator compressor goes on and off
frequently.

TEMPERATURES ARE TOO COLD
Temperature in the freezer is too cold

and the refrigerator temperature is
satisfactory.

Temperature in the refrigerator is too
cold and the freezer temperature is
satisfactory.

Food stored in drawers freezes.

Food stored in Meat Keeper (some
models) freezes.

TEMPERATURES ARE TOO WARM
Temperature in the freezer or refrigerator

is too warm.

Refrigerator control is set too cold. Set the refrigerator control to a warmer setting until the refrigerator
temperature is satisfactory. Allow 24 hours for the temperature to stabilize. Then, if the freezer
temperature is not right, set the freezer control to a colder setting.

Refrigerator or freezer gasket is dirty, worn, cracked, or poorly fitted. Clean or change gasket. Leaks
in door seal will cause refrigerator to run longer in order to maintain desired temperatures.

Thermostat is keeping the refrigerator at a constant temperature. This is normal. Refrigerator goes on
and off to keep temperature constant.

Freezer control is set too cold. Set the freezer control to a warmer setting until the freezer temperature
is satisfactory. Allow 24 hours for the temperature to stabilize.

Refrigerator control is set too cold. Set the refrigerator control to a warmer setting. Allow 24 hours for
temperatures to stabilize. Then, if the freezer temperature is not right, set the freezer control to a colder
setting.

Refrigerator control is set too cold. See above solution.
Meat should be stored at a temperature just below the freezing point of water (32°F, 0°C) for maximum

fresh storage time. It is normal for ice crystals to form due to the moisture content of meat.
Chilled Air Control set too cold. Adjust the Chilled Air Control to a lower setting.
Doors are opened too frequently or too long. Warm air enters the refrigerator whenever the door is

opened. Open the door less often.

Door is open slightly. See Occurrence section OPENING/CLOSING OF DOORS/DRAWERS.
Condenser is dirty. Clean condenser. See "Outside" in Care and Cleaning.

11