Frigidaire FRRERADWRH61 Specs

DropOverhead-In CooktopHood

FHWC30PEC30850RSK 

Signature Features

PowerPlus® 3-Speed Fan

Powerful airflow at 3 different speeds — quietly moves up to 400 cu. ft. of air per minute.

Dishwasher-Safe Filters

For consistently clean air circulation, use our removable, dishwasher safe filters.

Smudge-ProofTM

Resists fingerprints and cleans easily.

PowerBrightTM LED Cooktop Lighting

Clear, bright view of your cooktop workspace with LED lighting for seamless meal preparation. Offers 3 different brightness levels.

330"ElectricUnder-Cabinet

Features

	Nominal Width	30"
	Installation Type	Under-Cabinet
	Style	Canopy
	Controls	Push-Button
	Air Discharge	Vertical
	Air Delivery (CFM)	400
	Blower Type	Fan
	Sound Level (dBA)	75
	Fan Speeds	3
	Cooktop Light(s)	4 PowerBright™
		LED Lights
	Dishwasher-Safe Filter(s)	Yes
	Exhaust Duct	External
	Duct Required	3-1/4" x 10"
		Rectangular

Specifications

Product Dimensions –

Height	10-1/2"
Width	30"
Depth	20"
Voltage Rating	120V / 60Hz / 15A
Connected Load	.33 kW
(kW Rating) @ 120 Volts1
Amps @ 120 Volts	2.75
Shipping Weight (Approx.)	46
Sones Rating	3.0 – 6.6

1  For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.

NOTE: Always consult local and national electric codes. Check local building codes for installation requirements, as they may vary per locale. Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com.

Specifications subject to change.

Available in:

Smudge-Proof™

Stainless

(S)

frigidaire.com

Overhead Hood

FHWC3050RS 30" Under-Cabinet

36" base cabinet height to floor

30"

Height allowed from bottom

of hood canopy to cooking surface – 24"min.(elec.) / 27"min.(gas) / 30" sugg. max.

3 1/4" x 10" rectangular duct location

29 7/8"

3"

9" 101/2"

20"	4"

Exhaust

Vent hood is vertically ducted outside

using 3 1/4" x 10" rectangular duct. For detailed duct preparation and installation specifications, refer to installation instructions on web.

Cabinet Bottom

Filler strip mounting screw holes (4)

3"

Vertical duct

83/8"

3"

cutout

11/4"

51/4"

51/4"

Rear

dia.

Wall 5/8"*

C

4"

3"

L

3"

Electrical access hole (in cabinet bottom)

11/2"*

2"-wide wood filler strips required for

recessed cabinet bottoms only

*From wall, NOT cabinet frame

Power supply locations (top & rear)

13 3/4"

7 3/4"

27 3/4"

30"

Under-Cabinet Hood Specifications

•Product Shipping Weight (Approx.) – 46 Lbs.

•Under-Cabinet Installation – must be ducted vertically.

•Ventilation system exhausts air outside, vertically through roof.

(Refer to Ducting Option Specifications for outside ventilation.).

•Sones Rating – 3.0 – 6.6

•Voltage Rating – 120V / 60 Hz / 15 Amps

•Connected Load (kW Rating) @ 120 Volts = .33 kW

(For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)

•Amps @ 120 Volts = 2.75 Amps

•Always consult local and national electric codes. Check local building codes for installation requirements, as they may vary per locale.

•Makeup air systems may be required by local building codes when using ventilation systems greater than specified CFM of air movement. Specified CFM varies per locale.

•Connect vent hood with copper wire only. (For installation pre-wired with aluminum wiring, refer to Product Installation Guide on web for correct wiring procedure.)

•Locate vent hood away from strong draft areas, such as windows, doors or strong heating vents.

•24" (electric) / 27" (gas) minimum installation height allowed from bottom of hood canopy to cooking surface; 30" maximum height suggested.

•Ensure there is proper clearance within ceiling, wall or cabinet BEFORE making cutouts.

•When installing vent hood under cabinets with recessed bottoms, two 2"-wide filler strips required with length and thickness determined by recess dimensions.

•Framing for hood support MUST be capable of supporting 100 lbs.

Ducting Option Specifications

•Vent system MUST terminate outside through roof; do NOT terminate into attic or other enclosed area.

•Exhaust Duct Required – 3-1/4" x 10" rectangular with 35' maximum vent length. Refer to Product Installation Guide on web for calculations needed to determine total duct length.

•To provide efficient performance, length of vent system and number of elbows should be kept to minimum. Flexible vent greatly reduces performance and is NOT recommended.

•Use 3-1/4" x 10" rectangular metal vent only – rigid metal vent recommended; plastic or metal foil vent NOT recommended.

•For cold weather installation, additional backdraft damper and thermal break should be installed. Thermal break will minimize conduction of outside temperatures as part of the vent system with damper on cold air side of break, as close as possible to where vent system enters heated portion of house.

•Refer to Product Installation Guide on web for detailed vent system preparation instructions.

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

Accessories information available on the web at frigidaire.com

	USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com	Specifications
	CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
		subject to change.

FHWC3050R 03/16

© 2016 Electrolux Home Products, Inc.