Page 1
Packaged Terminal Air Conditioner (PTAC)
FRP90ETT3A
Air Conditioner /
Electric Heater
Product Dimensions
Height 16"
Width 42"
Depth 13-13/16"
More Easy-To-Use Features
Eortless™ Temperature Control
Frigidaire® air conditioners maintain the
preset room temperature so the room
remains comfortable at all times and
helps control energy levels.
Comfort Control Design
Simple controls allow guests to
customize their settings, while quiet,
uniform air movement keeps rooms
comfortable.
Smart Self-Check
Provides nine diagnostic points for selfcheck and correction of fault conditions.
Eco-Friendly
Frigidaire® uses R-410A refrigerant that’s
not harmful to the earth’s ozone layer
and meets U.S. Environmental Protection
Agency requirements.
Signature Features
SilentDesign™
Sound reduction package.
Eortless™ Maintenance
With Frigidaire’s reputation for durability,
easy maintenance, availability of reliable
parts and service you can count on,
you can be sure that you’re getting the
highest-quality performance.
Energy-Saver Option
This function effortlessly maximizes
energy efficiency while keeping guests
comfortable.
Eortless™ Protection
An optional corrosion-resistant fin
coating extends operation life and your
investment, plus it is easier to maintain in
coastal environments.
Eortless™ Operation
Simple, intuitive room controls are easy
for guests to operate — ensuring a
relaxing, more comfortable stay. Features
like Effortless™ Restart and Ready-Select®
controls reduce maintenance calls.
Performance
Cool
Electric Heater
BTUs
9,000
10,200
frigidaire.com
Page 2
Performance
B
A
C
Frigidaire
R= Normal no accessories
A= Seacoast no accessories
S= Normal w/ accessories
B= Seacoast w/ accessories
F R P 90 E T T 2 R
Room
PTAC
Platform
Design Year
T= 2010
U= 2011
BTU
77= 7,700
90= 9,000
12= 12,000
15= 15,000
Heat Type
E= Electric
P= Heat Pump
Voltage
2= 230/208V
3= 265V
PTAC Nomenclature
Plug Type (NEMA)
7-20P
BTU (Cool)
BTU (Electric Heater)
Dehumidification (Pints / Hour)
Cool Area (Sq. Ft.)
Energy Eciency Ratio
9,000
10,200
2.1
440
11.3
Electrical
Volts
Amps (Cool)
Amps (Electric Heater)
Watts (Cool)
Watts (Electric Heater)
Cable Included
Length of Power Cord
Circuit Breaker
Plug Type (NEMA)
265
3.2
11.32
800
3,000
Yes
2.6'
20A
LCDI (7-20P)
Features
Electronic Controls
Front Desk Control Ready
Fan Speeds (Cool / Fan / Heat)
Noise Level Indoors (High / Med / Low)
Quiet Start-Up
Low Voltage Start-Up
Random Restart Protection
Eortless™ Auto Freeze Protection
Energy Save
24-Hour On / O Timer
Air CFM (High / Med / Low)
Air Direction Control
Air Intake
Filter Type
Filter Access
Fin Coating
Slide-Out Chassis
Commercial Grade Warranty
1
Ready-Select® Controls
Yes
3 / 3 / 3
51 / 50 / 49
Yes
Yes
Yes
Yes
Yes
Yes
295 / 275 / 260
Auxiliary 2-Way
Fresh or Recycled
Nylon Mesh
Slide-Out
Seacoast
Yes
Yes
Certifications
Safety Certification
Performance
UL, CUL & CSA
AHRI & CEC
Specifications
Refrigerant
Charge
Shipping Weight (Approx.)
1
Warranty 5 year sealed system / 1 year full parts and labor.
R410a
19.40 oz.
126 Lbs.
Packaged Terminal Air Conditioner (PTAC)
FRP90ETT3A Air Conditioner / Electric Heater
USA
CANADA
FRP90ETT3A 10/11 © 2011 Electrolux Home Products, Inc.
•
10200 David Taylor Drive
•
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-866-942-1567
•
1-866-942-1567
NOTE: For planning purposes only. Always consult
local and national electric codes. Refer to Product
Installation Guide for detailed installation instructions
on the web at frigidaire.com.
Product Dimensions
A - Height
B - Width
C - Depth
Max. Wall Thickness
2
Unless the PTAC unit is installed with a wall sleeve.
•
frigidaire.com
•
frigidaire.ca
16"
42"
13-13/16"
13-13/16"
Wall Cutout Dimensions
Height
Width
2
16-5/16"
42-3/16"
Accessories information available
on the web at frigidaire.com
Specifications
subject to change.
Page 3
Front Panel
Chassis
Accessory
Wall Sleeve
Accessory
Outdoor Grille
Wall Sleeve
Adapter
PTAC - Heat Pump and Electric Heat models_Prod Specs
Rearward Slope
Outside Wall
1/4
" Slope
Inside Wall
Product Dimensions
Height
Width
Depth
Max. Wall Thickness
16"
42"
13-13/16"
13-13/16"
Wall Cutout Dimensions
Height
Width
16-5/16"
42-3/16"
Plug Type (NEMA)
7-20P
Packaged Terminal Air Conditioner (PTAC)
FRP90ETT3A Air Conditioner / Electric Heater
PTAC Specifications
•
Product Shipping Weight (approx.) – 126 Lbs.
•
An electrical supply with grounded three-prong receptacle is required.
The power supply circuit must be installed in accordance with current
edition of National Electrical Code (ANSI/NFPA 70)
and local codes & ordinances.
•
Voltage Rating – 265V / 60 Hz / 20 Amps
•
Amps @ 265V Volts = (Cool) 3.2 Amps / (Electric Heater) 11.32 Amps
•
Always consult local and national electric codes.
•
Recommended Circuit Breaker – 20 Amps
•
Unit equipped with 265V 3-wire power supply cord, NEMA plug type
7-20P, approximately 2.6' long.
•
In order for condensate water to drain properly inside the unit, the
sleeve must be installed properly: Level from right to left with a slight
1/4" rearward pitch from the indoor side to the outdoor side as shown in
the illustration above. Refer to the Installation Instructions on the web.
•
The drain kit listed on the Frigidaire® PTAC Accessories page can
be used for an internal or external drain. This applies to new and
replacement installation.
New Installation
•
For new installation, Frigidaire® PTAC Sleeves are available and
recommended for proper installation. See accessories pages for
sleeve options.*
•
Standard PTAC installation requires 13-13/16" maximum wall thickness,
unless a wall sleeve is used.
•
If the PTAC unit protrudes more than 4", then it is suggested that it be
installed with a subbase. See accessories pages for subbase options.
USA
CANADA
FRP90ETT3A 10/11 © 2011 Electrolux Home Products, Inc.
•
10200 David Taylor Drive
•
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-866-942-1567
•
1-866-942-1567
•
frigidaire.com
•
frigidaire.ca
Replacement Installation
•
When replacing existing PTAC with new unit, refer to Product
Installation Guide on web to identify existing wall-sleeve manufacturer
and size compatibility. If proper installation and slope are suspect,
then correct installation of Frigidaire® PTAC Sleeve options
recommended.
•
For any sleeve retrofit application, be sure that the foam seals
(factory-installed on the tube sheets) provide a good seal between
the grille and the outdoor coil tube sheets. These foam seals provide
a barrier that stops air from the inside mixing with air on the outside
(known as air recirculation).
•
Using Frigidaire® wall sleeve with Non-Frigidaire grille requires
installation of an Accessory Baffle Kit, which ensures a good seal
between the unit and exterior grille to prevent air recirculation. Air
recirculation is a large contributor to performance loss and premature
damage to major components.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
*See Frigidaire® PTAC accessories pages attached for optional accessories.
Specifications
subject to change.
Loading...