Gentle enough to melt chocolate and
powerful enough to to boil water, so it’s
great for entertaining or getting dinner
on the table quickly.
PowerPlus® Boost
Generates rapid heat for a quicker boil.
Exceptional Temperature Control
Adjust heat with greater accuracy than
on gas or electric cooktops especially at
lower settings.
Pro-Select® Controls
Precise control at your fingertips.
SpaceWise® Bridge Element
A flexible element lets you combine
two 7" elements into one to fit larger
cookware.
Cooktop Stays Cooler
With induction cooking, heat is
transferred directly to the cookware,
so the cooktop stays cooler to the
touch — making it easier to clean.
More Energy-Ecient
Cooking with induction is 70% more
efficient than gas and 20% more
efficient than electric.
Cookware Compatibility
Cooktops include a combination of
electric elements that are compatible
with all cookware, and induction
elements that are compatible with most
stainless steel and cast iron cookware. If
a magnet sticks to the bottom of a pot
or pan, it is induction-friendly.
More Responsive
Cooking with induction is more
responsive than gas or electric so
you can easily go from simmer to boil.
10" and 6" Induction Elements
With two powerfully efficient induction
elements, plus up to three electric
elements, the Induction Hybrid Cooktop
offers the utmost cooking flexibility.
And the 10" induction element offers
3,400 watts of power, so you can bring
water to a boil quickly.
Smoothtop Ceramic Glass
Cooking Surface
Hot Surface Indicators
Available in:
Stainless
(S)
Elements
Right Front
Right Rear
Left Front
Left Rear
Left Bridge
Center
Size
Induction 10"
Induction 6"
Electric 7"
Electric 7"
SpaceWise®
Bridge
Electric 6"
Watts
2,500 / 3,400
1,500 / 1,900
1,800
1,800
800
1,200
frigidaire.com
Features
A
B
C
Controls
Surface Type
Right Front Element (Watts)
Right Rear Element (Watts)
Left Front Element (Watts)
Left Rear Element (Watts)
Left Bridge Element (Watts)
Center Element (Watts)
Hot Surface Indicators
Control Location
Knob Color
Knob Type
Pro-Select®
Black Ceramic Glass
Induction 10" –
2,500 / 3,400
Induction 6" –
1,500 / 1,900
Electric 7" – 1,800
Electric 7" – 1,800
SpaceWise® Bridge – 800
Electric 6" – 1,200
Yes
Right Side
Stainless
Cast Metal
Specifications
Power Supply Connection Location
Voltage Rating
Connected Load
(kW Rating) @ 240 / 208 Volts
1
Amps @ 240 / 208 Volts
Minimum Circuit Required (Amps)
Approved for Electric Single
Wall Oven Combination Installation
Shipping Weight (Approx.)
1
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC
only electrical supply with ground required on separate circuit fused on
both sides of line.
2
Cooktops are approved for installation above any of our Electric Single
Wall Ovens.
Right Rear
240V /208V / 60Hz
9.4 / 7.5
39.2 / 36.1
40
Yes
2
65 Lbs.
Built-In Cooktop
FPCC3685K S 36" Induction Hybrid
NOTE: For planning purposes only. Always consult local and national electric codes.
Refer to Product Installation Guide for detailed installation instructions on the web
at frigidaire.com.
Cooktop cutout height includes clearance needed beneath cooktop to
allow for armored cable and installation of junction box on back wall.
Position center of junction box 10" inward from right side of cooktop
cutout, and 12" down from underside of countertop.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than 36".
•
Allow 30" minimum clearance between top of cooktop platform
and bottom of unprotected wood or metal overhead cabinet; or 24"
minimum clearance when bottom of wood or metal overhead cabinet
is protected by not less than 1/8" flame-retardant millboard covered
with not less than No. 28 MGS sheet steel, 0.015" stainless steel,
0.024" aluminum or 0.020" copper.
•
Allow 2" minimum clearance between rear edge of cutout and nearest
5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
Specifications
subject to change.
Electric Cooktop Installation
Over 30"/27" Electric Single Wall Oven
30"/ 27" Electric Single Wall Oven
Under-Counter Installation Specifications
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
•
For detailed electrical requirements, refer to model-specific product
page and installation guide on web.
•
Always consult local and national electric codes.
•
Minimum 21" clearance for oven door depth when open.
•
Minimum 23-1/2" deep cutout dimension is critical for proper
installation, to ensure that oven’s faceplate will fit flush against
cabinet front.
•
Side filler panels necessary to isolate oven from adjoining cabinets.
•
Full oven base of solid plywood or similar material required, capable
of supporting 200 Lbs. (30" models) or 150 Lbs. (27" models).
Install over two runners and flush with toe plate.
•
Base must be level and cabinet front must be square.
•
Allow 5" maximum height from oven base to floor, if NO cooktop is
Electric Cooktop Installation Over
30"/ 27" Electric Single Wall Oven Specifications
All Frigidaire® Electric Single Wall Ovens are approved to be used
beneath any approved Frigidaire® Electric Cooktop. (This installation
page excludes approved wall oven model GLEB27Z7H. For modelspecific installation details, refer to Electric Cooktop Installation Over
27" Electric Single Wall Oven GLEB27Z7H Specifications pages on web.)
For detailed Electric Cooktop installation, refer to model-specific
product page and installation guide on web.
•
Side filler panel height may need to be modified to accommodate the
depth of approved electric cooktop models.
•
To route armored cable to junction box, cut minimum 4" x 4" opening
in right side filler panel.
•
Allow 4-1/2" maximum height from oven base to floor, if cooktop is
installed directly over wall oven.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.