Frigidaire FNVV60GGEWT User Manual
FNVW60GG2WT
FNVV60GGEWT
ELECTRICAL FREESTANDING
OVEN
USERS MANUAL
Our Esteemed Customer,
We strive to offer quality products which are produced in modern
facilities and pass through many quality tests.
Your manual is prepared in order to help you to use your
oven, which is manufactured by the most recent technology,
utilizing confidence and maximum effciency.
Before beginning use of your oven, carefully read this guide to
understand the basic information for correct and safe installation,
maintenance and use. Please contact the nearest authorized
service facility for installation of your product.
CONTENTS :
1. OVEN DIAGRAM
2. WARNINGS
3. INSTALLATION AND PREPARATIONS FOR USE
4. USE OF YOUR OVEN
5. CLEANING AND MAINTENANCE
6. SERVICE AND TRANSPORT
1
PART 1 : OVEN DIAGRAM
1011
1
2
3
4
Part of List :
1- Cooktop Cover
2- Cooktop
3- Control Panel
4- Oven Door Handle
5- Drawer Cover
6- Supply Leg
7- Oven Door
8- Oven Tray
9- Wire Grid
10- Front Resistance
11- Fan Store
12- Oven Lamp
13- Hotplate
14- Highlite element
12
3
1
9
8
7
6
5
MODEL
FNVV60GGEWT
SIZE(cm)
6
0*60*85
2
PART 2 : WARNINGS
TAKE ALL IMPORTANT SECURITY MEASURES AND READ THE MANUAL
COMPLETELY BEFORE USING THE APPLIANCE
This appliance has been designed for non-professionel, domestic use only.
Surely control whether there is any damage after you unpacked the appliance.
If there is any defect; do not use the appliance and immediately contact to the
authorized maintenance service. As the materials used for package ( nylon, stapler,
strafoam. etc. ) may cause harmful effects to children, they should be collected and
removed immediately.
The appliance must be set up by an authorized technician and put into use. The
producer is not responsible for any damage that might be caused by defective
placement.
Before connecting your appliance to the electric , carefully control
whether it is appropriate for the features determined on the package and/or data
plate on the appliance.
Compare the features of the electricity organization with the technical information
on the presentation label before plugging the appliance in.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Before changing the oven's lamp, disconnect the appliance from supply.
Turn the appliance off before the operations such as cleaning or maintenance.
You can do it after plugging it off or turning the main switches off
Some parts of appliance may hold its heat for a long time, it is required to wait for it
to cool before touching onto the points that are exposed to the heat directly.
This appliance is not intended for use by persons(including children) with reduced
physical, sensory and mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not keep flammable materials close while the appliance is operating.
Pay attention to the cables of the other electrical devices operating near the
appliance, so as not to touch to hot points.
Pay attention the switches to be off position ''0'', when the appliance does not operate.
The glass lid that some models have may crack when they are exposed to
extreme heat. Do not close the glass lid without being sure that the cooker is off
and cooled completely.
This manual is prepared for more than one model in common. Your appliance may
not have some of the features that is explained in manual. Pay attention to the
expressions that have figures, while you are reading the operating manual.
In case of the visible cracks on the ceramic surface of the oven, switch off the oven.
During the use the appliance gets hot. Take special care to prevent touching of
heating elements inside oven cavity.
During grilling mode the oven door should be closed.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door
glass since they can scratch the surface, which may result in shattering of the glass.
Before opening the lid covering the hotplates, take care that no liquids are on the
top of the lid. The lid is to closed not earlier than hobs have been cooled down.
Take care that the lid is in correct position under operation.
In case that highlight-halogen heaters are installed as hob elements do not stare
into the light.
In case that the oven will be placed on a socket steps must be resorted to prevent
falling down of the oven from the socket.
A steam cleaner shall not be used.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut
out, this appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
FOR EFFICIENCY AND SECURITY OF APPLIANCE, WE RECOMMEND YOU ALWAYS
TO USE THE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED
SERVICES WHEN IN CASE OF A NEED.
WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of
electric shock.
WARNING: Accessible parts may become hot during use. Young children should be kept
away.
WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
This modern, functional and practical oven, that was manufactured with the most
quality parts and materials, will meet your needs in every respect. You must surely
read this manual in order not to have any problem in future and to be able to have
successfull results. The following information are the required rules for right
installation and service processes. It must be read especially by the technician who
will install the appliance.
Contact to Authorized Service for mounting of your oven.
3. 1 INSTALLATION OF OVEN
There are some factors that must be paid attention to while installing your oven.
Surely pay attention to our below suggestions in order to be able to prevent any
problems and/or dangerous situations that may occur later.
It can be placed close to other furniture on condition that in the area where the oven
is set up, the furniture's height must not exceed the height of the cooker panel.
Pay attention not to place it near the refrigerator, there must be no flammable or
in flammable materials such as curtain, waterproof cloth etc. that will begin to burn
quickly, while selecting place for oven.
It is required there must be at least 2 cm blank space between the back cover of
oven and wall for air circulation.
The furniture close to oven must be manufactured resistant to heat more than
50 C° of the room temperature.
If the kitchen furniture are higher than the pan which the oven's cookers are on,
it must be at least 11 cm away from the oven's side.
The minimum heights from the oven's pan and wall cupboards and paddle boxes
with fan over the oven, are shown as below. Thus, the paddle box must be at
minimum 650 mm height from the cooker pan.
If there is no paddle box, this height must not be less than 700 mm.
This appliance must only be installed directly on the floor and not on a base.
3. 2 ADJUSTMENT OF FEET
The supply cable must not touch to the hot surface of the product.
Your oven stands on 4 adjustable feet. Be sure the oven is balanced before installation
If required, you can adjust the feet by turning the feet clockwise. It is also possible to
raise the oven a maximum of 15 mm with the feet.
If the feet are adjusted appropriately, do not move the oven by dragging it, only move
it by lifting it up and carrying it. It is required to take the oven's drawer out in order to
adjust the oven's feet. The feet can be adjusted from inside .
3.3 ELECTRIC CONNECTION AND SECURITY
During the electric connection, be sure to follow the instructions below.
The earthing cable must be connected to the terminal. Ensure that the
cable with insulation is connected to the power source during the connection of
cable. If there is not any appropriate earthed electric outlet in accordance with
regulations in the place where the oven will be installed, immediately contact
the authorized service.
The earthed electric outlet must be close to the oven. Do not use an
extension cord.
The feeding cable must not touch any hot surface of the product.
In case the feeding cable is damaged, contact the authorized service. The
cable must be changed by the authorized service.
The wrong electric connection may damage your oven, which may not be covered
by the guarentee.
The oven is adjusted as appropriate for 220-240 Volts and 400V 3N Volts
of electricity. If the network electricity is different than this informed value, immediately
contact your authorized service.
The electric cable must not touch the hot parts of the oven. The electric cable
must not touch the back part of the oven. Otherwise the electric cable of the
oven may be damaged which may cause a short circuit.
The manufacturer declares that it has no responsibility against any kind of damages
and losses that are caused bythe following security norms.
There is to install an all pole disconnector inside the supply circuit with a contact
opening of at least 3.0mm rated 32A and delay functioning type.
The appliance is provided for fixed connection to the power supply. The connection
of the appliance to an electrical source must be done by authorized technician.
6
3. 3 GENERAL WARNINGS AND MEASURES
Your oven is produced in accordance to the related security instructions
connected with an electrical oven. Maintenance and repair must be made only by
the authorized service technician who is trained by the manufacturer. Performing
any installation or repair without following these warnings may endanger you.
The outside surfaces will become warm while your oven is in operation. The
interior surfaces of the oven, are quite hot. Even after the oven is turned off, these
parts hold its heat for an extended period of time. Do not touch the hot surfaces.
Keep children away from the oven.
Do not walk away from the cooker while cooking with solid or liquid oils. There
may be flaming due to extreme heating. Never pour water onto flames occuring from
oil. Cover the saucepan or frypan with its cover in order to choke the flame and turn
the cooker off.
In order to use your oven, you must program the oven's clock and adjust the
oven and heat switches.
Do not leave anything on the oven when the door or drawer of oven is open. You
may unbalance your oven.
Do not put heavy things or flammable, burnable goods (nylon, plastic bag, paper,
cloth etc.) into the lower drawer.
Turn off your oven and gas valve when not in use.
Protect your oven against atmospheric conditions. Do not leave it to be affected
by sun, rain, snow etc.
7
PART 4 : USE OF YOUR OVEN
FNVV60GGEWT
FNVV60GGEWT
4. 1 GENERAL APPEARENCE AND TECHNICAL FEATURES OF YOUR OVEN
FNVW60GG2WT
LOWER HEATER
UPPER HEATER
GRILL
TURBO HEATER
4. 2 PRESENTATION AND FEATURES OF THE CONTROL PANEL
FNVW60GG2WT
Oven Function
Oven Function
Switch
Switch
1100 WATT
1200 WATT
2000 WATT
2000 WATT
Oven Thermostat
Oven Thermostat
Switch
Switch
Left Front
Left Front Heater
Heater
RightBack
Right Back Heater
Heater
Left Back Heater
Left Back Heater Right Front Heater
Right Front Heater
4. 3 USE OF HOTPLATES AND VITROCERAMIC COOKERS
The electrical cooker is commanded by 7 graded switches. 0 is the off location. Please refer to
the diagram below to see the other 6 grades:.
1..........Keeping hot location
2-3......Heating locations at low heat
6
5
4
3
Vitroceramic Cooker
8
4-5-6..Cooking - roasting and boiling
1
locations
2
The upper part of the hotplates are covered by a protective material resistant to heat.
Upon your first use of the cooker, turn the switch of the electrical cooker to 3 and
then operate the cooker for 5 minutes in order to toughen the protective layer.
Be sure the saucepans that you use have smooth bases and that you use the
appropriate size saucepan. This will maximize the efficiency from your cooker It is not
suggested to use little sized saucepans on a big sized heating element as this will
cause heat loss and waste energy.
RIGHT
WRONG
circular saucepan base
WRONG
small saucepan diameter
saucepans base had not settled
WRONG
Be sure to turn the control knob to 0 after cooking.
Also never touch the heating element as the cooker will be hot for an extended time
after it is turned off.
Do not let children close to the cooker..
Clean the electrical cooker with a wet cloth after using the electrical cooker. If there
is excessive dirt and residue on the cooktop, you can clean it with soap and water .
Turn the heating elements on low for a few minutes in order to dry after cleaning. If
you do not intend to use the cooktop for awhile after cooking, be sure to apply a thin
layer of oil to the cooktop.
Dual or Oval Vitroceramic Cooker
6
5
4
1
Dual or vitroceramic cookers can heat in two different position.
For operating the big diameter of dual cooker turn the switch to
2
3
" ". Both big and small diameter of the cooker will operate.
For operating the oval part of the oval cooker, turn the switch
to " ". Both oval and round parts will operate.
9
Loading...