Installation
Instructions
BEFORE YOU BEGIN
•
IMPORTANT
for local inspector's use.
•
IMPORTANT
codes and coordinates.
•
Note to Installer
these instructions with the Consumer.
•
Note to Consumer
instructions for future reference.
• Skill level - Installation of this appliance
requires basic mechanical and electrical
skills
– Save these instructions
– Observe all governing
– Be sure to leave
– Keep these
FOR YOUR SAFETY:
WARNING
switch power off at service panel and lock the
service disconnecting means to prevent power from
being switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to
the service panel.
– Before beginning the installation,
IMPORTANT:
Before installing the exhaust duct, confirm the floor is level.
The level bubble should be equal distance from level guide
lines.
Built-in Trim Kit
Models # FMTK3027AS FMTK3027AD FMTK3027AB
FMTK3027AW FMTK2727AS FMTK2727AB
FMTK2727AW
Read these instructions completely and carefully.
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is
not covered under the Warranty.
• Unplug the microwave oven before
attempting installation of this kit.
• Because the kit includes metal parts, caution
should be used in handling and installation to
avoid the possibility of injury.
• Do not remove permanently affixed labels,
warnings, or plates from the product. This
may void the warranty.
IMPORTANT - PLEASE READ
AND FOLLOW
THIS BUILT-IN KIT IS DESIGNED FOR USE
ONLY WITH MICROWAVE
OVENS SPECIFYING BUILT-IN KIT
FMTK3027AS/D/B/W OR
FMTK2727AS/B/W ON THE RATING LABEL ON THE
LEFT SIDE WALL OF THE MICROWAVE OVEN
CAVITY.
FRIGIDAIRE
QUESTIONS?
For customers in the United States call:1-1800-944-9044
For customers in Canada call: 1-800-265-8352 (English)
1-800-668-4606 ext.8199 (French)
Visit our Website at: www.frigidaire.com
READ CAREFULLY.
KEEP THESE INSTRUCTIONS.
PN: A06823523
April 2024
16170000A84905
EN-1
Installation Instructions
PARTS INCLUDED IN THE KIT
1. Front Frame Assembly- QTY 1
Exhaust Duct - QTY 1
2.
Bottom
3. Screw A - QTY 11
4. Screw B - QTY 4
Mounting Rail
CHOOSING A LOCATION FOR
YOUR MICROWAVE OVEN IF
BUILT-IN
– QTY 2
(3.9X8.0 mm)
(4.0X20 mm)
Built-In Trim Kit allows for the installation of microwaves
listed below to be built into a cabinet or wall by itself or
over an electric wall oven*.
Model Number
FMBS2227AB/FMBS227BB
FMTK3027AS SS 30'' trim kit
FMTK3027AD
FMTK3027AB
FMTK3027AW
FMTK2727AS SS 27'' trim kit
FMTK2727AB
FMTK2727AW
See Illustration 2 for proper location and when building
above a wall oven. Carefully follow both the wall oven
installation instructions and Electrolux’s Built-in Kit
instructions. If building over a wall oven, be sure the
clearance between the wall oven and the microwave
oven is a minimum of 3 inches.
*NOTE: Trim Kit and microwave can only be built-in
over an electric self-clean or non-self-cleaning
single cavity wall oven.
Color Description
Black Microwave
Black SS 30'' trim kit
Black
White
Black
White
30'' trim kit
30'' trim kit
27'' trim kit
27'' trim kit
Front Frame Assembly
Exhaust Duct
Illustration 1
Trim Kit Overall Dimensions
27”
Height
Width
Depth
18 1/8 (460 mm)
26 15/16 (684 mm)
1 9/16 (40 mm)
Bottom
Mounting Rail
30”
18 1/8 (460 mm)
29 15/16 (759 mm)
1 9/16 (40 mm)
CABINET OR WALL CUTOUT
Cutout Dimensions
Height (A)
Minimum
Maximum
Width (B)
Minimum
Maximum
Depth (C)
Minimum 20” (508 mm)
17” (432 mm)
17
” (438 mm)
1/4
3/4
” (629 mm)
24
25” (635 mm)
3"Min
Illustration 2
EN-2
Installation Instructions
Screw A
Illustration
3
ELECTRICAL OUTLET LOCATION
Outlet should NOT be in the shaded area as indicated
on Illustration 3
NOTE 1:
The floor of the opening should be constructed of
plywood strong enough to support the weight of the
oven and floor load (approximately 100 pounds). The
floor should be level for proper operation of the oven. Be
sure to check the local building code as it may require
that the opening be enclosed with side, ceiling and rear
partition. The proper functioning of the oven does not
require the enclosure.
Center Line
Illustration
4
EXHAUST DUCT ASSEMBLY
1. Draw a Central Line on floor. Place the Exhaust
Duct in the opening When the Exhaust Duct
Assembly is in the opening correctly, the Center
Line is in the middle of the Exhaust Duct
Assembly. See Illustration 4.
2. Secure the Exhaust Duct Assembly with the
three screws A.
IMPORTANT: Secure screws in outer hole.
3 screws are needed for exhaust duct assembly
IMPORTANT:
Before installing the exhaust duct, confirm the floor is level.
The level bubble should be equal distance from level guide
lines.
,
EN-3
Installation Instructions
Bottom Mounting Rail
1. Turn microwave upside down so you are
looking at oven bottom. Secure the bottom
Mounting Rail on oven with four screws A.
See Illustration 5 below.
Screw A
OVEN INSTALLATION
1. Place the oven adjacent to the wall or cabinet
opening. Plug the power cord into the electrical
outlet.
IMPORTANT: Protect cabinet when placing on
counter top.
Carefully guide the assembled oven into the
2.
prepared opening. Slide the oven o
Exhaust Duct Assembly. See Illustration 6.
3. Secure the Exhaust Duct Assembly with the four
screws
A.
n the
B
Illustration 5
Screw A
A
Illustration 6
Detail B
Detail A
EN-4
Installation Instructions
FRAME INSTALLATION
1. Position the FRAME ASSEMBLY to be square
with the oven. Carefully place the FRAME
ASSEMBLY on the oven. See Illustration 7.
2. Check that it is level and then secure with two
Screws B. Secure the bottom portion of the
FRAME ASSEMBLY with the two remaining
Screws B. See Illustration 8.
Illustration
Illustration
7
8
EN-5
Loading...