Frigidaire FGS379DSA, FGS379DQA, FGS379DCA, FGS379DBA, FGS367DSA Owner’s Manual

@

Welcome .................................. 2

Important Safety instructions .. 3-6

Setting Oven Controns ......... 11

Visit the Frigidaire Web Site at:

http://www.frigidaire.com

READ AND SAVE THESE INSTRUCTIONS

Cooking Jnformations ..... 12-13

Warranty ................ Back Cover

318200878 (0406) Rev. A

m w

Questions?

1°800°944°9044

1o866o294o9911

(Canada)

Please attach sales receipt

here for future reference.

Congratulations on your purchase of a new appliance! Af Electroiux Home
Products, we are very proud of our product and are completely committed to
providing you with the best service possible, Your satisfaction is our number one
priority

We know you'll enjoy your new appliance and ThankYou for choosing our product,
We hope you consider us for future purchases,

PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTmONS
This Use & Care ManuaUcontains general operating instructions for your appliance

and feature nformatien for several modeUs,Your product may not nave aHthe
described features, The graphics shown are representative,The graphics on your
appliance may not Hook exactHyHikethose shown, These instructions are net
meant to cover every pessiNe condition and situation that may occur, Common
sense and caution must be practiced when installing, operating and maintaining
any appliance,

Ptease record your modeJ and seriaJ numbers below for future reference,

ModeUNumber:
Serial Number:

Purchase Date:

Versi6n en espaSol

Si desea obtener una copia en espa_ol
de este Manual del Usuario, sirvase
escribir a la direcci6n que se incluye a

continuaci6n, Solicite la P/N
318200878E,

Spanish Use & Care Manual
Electrolux Home Products
P, O, Box 212378

Augusta, GA 30917

Product Registration

Register Your Product
The PRODUCT REGISTRATION CARD should

be filled in completely, signed and returned to
Electrolux Home Products,

Seria P ate Location

O 2004 Electrolux Canada Corp=

All rights reserved

Read all instructions before using this appliance.

Save these instructions for future reference.

This manuaUcontains important safety symbob and k_structions. PUeasepay attention to these symbob and follow aH

This symbol will he!p a!ert You t0 Situations that may cause seiious bodily hat m, death 0i property damage.

This symb oj WiHhe!p ab rt y°u to situations that may cause bod!!y !njury or property damage,

if the information in this manuaJ is not

followed e×actly, a fire or e×pJosion may result causing

property damage, personaJ injury or death.
FOR YOUR SAFETY:

-- Do not store or use gasoline or other flammabb
vapors and liquids in the vicinity of this or any other
appliance.

-- WHAT TO DO IF YOU SMELL GAS:

o Do not try to light any appJiance.
o Do not touch any electrical switch; do not use any

phone in your building.

o lmmediatelycaH your gas supptier from a neighbor's

phone. Follow the gas suppHer's instructions.

o If you cannot reach your gas supplier, call the fire

department.

-- Installation and service must be performed by a
qualified installer, servicer or the gas supplier.

, AH rangescan tip.
o injury to persons couJd resuJt.
o Install anti-tip device packed with range.

, SeeinstaHationlnstructions.

tipping, the range must be secured

by property installed anti-tip
bracket(s) provided with the range.

To check if the bracket(s) is installed

property, remove the tower paneJ or
storage drawer and verify that the
anti-tip bracket(s) is engaged. Refer

to the Installation instructions for

proper anti-tip bracket(s)

installation.

o Remove aHtape and packaging before using the

range. Destroy the carton and plastic bags after
unpacking the range. Never allow children to play with

Proper Installation-Be sure your appliance is properly
installed and grounded by a quaJified technician in

accordance with the National Fuet Gas Code ANSI
Z223.1 Jatest edition, and National Electrical Code

ANSI/NFPA No. 70 tatest edition, and tocaJ code
requirements. Install only per installation instructions
provided in the literature package for this range,

Ask your dealer to recommend a qualified technician and an
authorized repair service, Know how to disconnect the elec-
trical power to the appliance at the circuit breaker or fuse
box in case of an emergency,

User servicing--Do not repair or replace any part of
the appJiance untess specifically recommended in
the manuaJs. All other servicing should be done only by
a qualified technician, This may reduce the risk of
personal injury and damage to the range,

o Never modify or alter the construction of a range by

removing Jeveting Jegs, panels, wire covers, anti-tip
brackets/screws, or any other part of the product.

Stepping, Jeaning or sitting on the door

or drawer of this range can result in serious injuries
and also cause damage to the range. Do not allow
children to climb or play around the range, The weight of a
child on an open door may cause the range to tip, resulting
in serious burns or other inju_i,

Do not use the oven or warmer drawer (if

equipped) for storage.

Do not store items of interest to children

in the cabinets above a range. Children climbing on the
range to reach items could be seriously injured,

Never use your appliance for warming up

or heating up the room.

° Storagein or on Appliance--FJammablematerials

should notbe storedinan oven,nearsurfaceburners
or in the drawer (ifequipped).This includespaper,

pUastic and cloth items, such as cookbooks, pUasticware
and toweUs, as weft as flammabUe Hquids, Do not store
expUosives, such as aerosoUcans, on or near the appfiance,

FUammaMe materiaUs may explode and result in fire or

property damage,

Do not Jeave children alone--Children should not be

teft aJone or unattended in the area where appliance
is in use. They should never be allowed to sit or stand
on any part of the appliance,

DO NOTTOUCH SURFACE BURNERS, AREAS NEAR
THESE BURNERS, OVEN BURNERS OR INTERIOR

SURFACES OF THE OVEN. Both surface burners and
oven burners may be hot even though flames are not

visible, Areas near surface burners may become hot
enough to cause burns, During and after use, do not
touch, or let clothing or other flammable materials touch
these areas until they have had sufficient time to cool,
Among these areas are the cooktop, surfaces facing the
cooktop, the oven vent openings and surfaces near
these openings, oven door and window,

Wear proper apparel--Loose-fitting or hanging
garments shouJd never be worn while using the
appliance. Do not let clothing or other flammable

materials contact hot surfaces,

IMPORTANT--Do not attempt to operate the oven
during a power faiJure. If the power falls, aJways turn
off the oven, If the oven is not turned off and the power
resumes, the oven may begin to operate again, Once the
power resumes, reset the clock and oven function,

EJectronic controllers can be damaged

by coM temperatures. When you use your appliance
for the first time, or if it has not been used for a long
period of time, make sure that it has been exposed to a
temperature above 0°C/32°F for at teast 3 hours before
connecting it to the power supply.

mMPORTANT mNSTRUCTmONS FOR USmNG
YOUR COOKTOP

Use proper flame size--Adjust flame size

so it does not extend beyond the edge of the utensil, The
use of undersized utensils will expose a portion of the
burner flame to direct contact and may result in ignition of
clothing, Proper relationship of utensil to flame will also
improve efficiency,

Do not use stove top grills on the burner

grates of sealed gas burners, If you use a stove top grill
on a sealed gas burner, it will cause incomplete

combustion and can result in exposure to carbon
monoxide levels above allowable current standards, This

can be hazardous to your health,

° Do not use water or flour on grease fires--Smother

the fire with a pan tid, or use baking soda, a dry
chemical or foam-type extinguisher.

, When heating fat or grease, watch it closely. Fat or

grease may catch fire if allowed to become too hot,

in case of fire or gas teak, be sure to

turn off the main gas shutoff valve.

Use onJy dry pothoJders--Moist or damp potholders
on hot surfaces may resuJt in burns from steam. Do
not let potholders touch hot heating burners, Do not
use a towel or other bulky cloth instead of a potholder,

, Do not heat unopened food containers--Buildup of

pressure may cause container to burst and result in
injury.

, Remove the oven door from any unused range if it

is to be stored or discarded.

. Knowwhich knob controts each surface burner.

Place a pan of food on the burner before turning it on,

and turn the burner off before removing the pan,

° Atways turn the knob to the fuji LITE position when

igniting top burners. Visually check that burner has lit,
Then adjust the flame so it does not extend beyond the

Use proper pan size. This appliance is equipped with

one or more surface burners of different sizes, Select
utensils having flat bottoms large enough to cover the

surface burner, The use of undersized utensils will
expose a portion of the surface burner to direct contact

and may result in ignition of clothing, Proper relationship
of utensil to the surface burner will also improve

efficiency,

Utensil handles should be turned inward and not

extend over adjacent surface burners, To reduce the

risk of burns, ignition of flammable materials, and

spillage due to unintentional contact with the utensil, the
handle of the utensil should be positioned so that it is

turned inward, and does not extend to adjacent surface
burners,

Neverteavesurfaceburnersunattendedathighheat
settings--Believerscausesmokingandgreasy
spHbversthatmayignite,orapanthathasboileddry
maymeUt,

Protectiveliners--DonotuseaUuminumfoiltoHne
surfaceburnerpans,orovenbottom,exceptas

suggestedinthismanualimproperinstallationofthese
HnersmayresuUtinriskofeUectricshock,orfire.

GlazedcookingutensHsIOnlycertaintypesofglass,
glass/ceramic,ceramic,earthenware,orotherglazed
utensilsaresuitableforrangetopservicewithout
breakingduetothesuddenchangeintemperature,
Checkthemanufacturer'srecommendationsforcooktop

use,

o Do not use Searing Grill on the cooktop. The searing

grHUis not designed for use on the cooktop, Doing so
may resuUtin a fire,

Do not use decorative surface burner covers, If a
burner isaccidentally turned on, the decorative cover

will become hot and possibly melt, Burns will occur if
the hot covers are touched, Damage may also be done
to the cooktop or burners because the covers may
cause overheating, Air will be blocked from the burner
and cause combustion problems,

FOR GLASS COOKTOPS ONLY

o Do not cJean or operate a broken cooktop--lf cooktop

should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of
electric shock, Contact a qualified technician
immediately,

o Ctean cooktop gJass with caution--if a wet sponge or

cloth is used to wipe spills on a hot cooking area, be
careful to avoid a steam burn, Some cleaners can

produce harmful fumes if applied to a hot surface,

o Avoid scratching the cooktop glass with sharp

objects.

mMPORTANT mNSTRUCTmONS FOR USmNG
YOUR OVEN

o Use care when opening oven door or warmer drawer

(if equipped)--Stand to the side of the range when
opening the door of a hot oven, Let hot air or steam

escape before you remove or replace food in the oven/
warmerdrawer,

Keep oven vent ducts unobstructed. The oven vent is
located at the center rear of the cooktop, Touching the
surfaces in this area when the oven is operating may
cause severe burns, Also, do not place plastic or heat°

sensitive items on or near the oven vent, These items
could melt or ignite,

PJacement of oven/warmer drawer (if equipped)
racks. Always place oven racks in desired location
while oven/warmer drawer (if equipped) is cool, If rack

must be moved while oven is hot use extreme caution,
Use potholders and grasp the rack with both hands to

reposition, Do not let potholders contact the hot heating
elements in the oven/warmer drawer (if equipped),
Remove all utensils from the rack before moving,

o Do not use the broiler pan without its insert. The

broiler pan and its insert allow dripping fat to drain and
be kept away from the high heat of the broiler,

o Do not cover the broiler insert with aluminum foit.

Exposed fat and grease coutd ignite.

Do not touch a hot tight butb with a damp cloth.
Doing so could cause the bulb to break, Disconnect the
appliance or turn off the power to the appliance before
removing and replacing light bulb,

mMPORTANT mNSTRUCTmONS FOR CLEANmNG
YOUR RANGE

o CJean the range regulaHy to keep aH parts free of

grease that couM catch fire. Exhaust fan ventilation
hoods and grease filters should be kept clean, Do not
allow grease to accumulate on hood or filter, Greasy
deposits in the fan could catch fire, When you are
flaming food under the hood, turn the fan on, Refer to the
hood manufacturer's instructions for cbaning,

Kitchen cteaners and aerosols--Always follow the
manufacturer's recommended directions for use, Be

aware that excess residue from cleaners and aerosols
may ignite causing damage and injury,

SELF-CLEANmNG OVENS

o in the serf-Cleaning cycle only cJean the parts listed

in this Use and Care Guide. Before self-cleaning the
oven, remove the broiler pan and any utensils or foods
from the oven,

o Do not use oven cleaners--No commercial oven

cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven,

oDonotcteandoorgasket--Thedoorgasketis

essentialforagoodseal,Careshouldbetakennotto
rub,damageormovethegasket,

oRemoveovenracks.Ovenrackscolorwiiichangeifleft

intheovenduringa self-cleaningcycle,

Thehealthofsomebirdsisextremely

sensitivetothefumesgivenoffduringtheself-
cteaningcycleoftherange.Movethebirdstoanother

wettventilatedroom.

mmportant Safety Notice

The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of

substances known to the state to cause cancer, birth
defects or other reproductive harm, and requires

businesses to warn customers of potential exposure to
such substances,

SAVE THESE INSTRUCT ONS

Grounding instructions

For personal safety, the cooktop must be properly grounded, For

outlet that is correctly polarized and properly grounded,
DO NOT Operate the cooktop using a 2-prong adapter oran extension

cord, If a 2-prong wall receptacle is the only available outlet, it is the "_-
personal responsibility of the consumer to have it replaced with a

properly grounded 3-prong wall receptacle installed by a qualified

maximum safety, the power cord must be plugged into an electrical i_o _._.J_ ..,dJ
electrician,

See the INSTALLATION INSTRUCTIONS packaged with this cooktop
for complete installation and grounding instructions,

This appliance is equipped with a 3°prong grounding

plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle, DO NOT cut or remove the
grounding prong from this plug,

Grounding type
wall receptacb

Avoid fire hazard or electrical shock,

DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord,
Failure to follow this warning can cause serious injury,

fire or death,

Conversion to Liquefied Petroleum Gas (or L.P. Gas)

This natural gas range is designed to allow for conversion to
Liquefied Petroleum (L,P,) Gas,

if L,P, conversion is needed, contact the service center for
assistance, The L,P, Conversion Kit is provided with this range
and is located on the right panel (right side) of the range, Before
installing the kit be sure to follow the L,P,Installation instructions
carefully,

may occur if the range is not installed by a qualified installer
or electrician,

required in order for this appliance to satisfactorily meet the

application needs must be made by an authorized Service
Center,

Personal injury or death from electrical shock

Any additions, changes or conversions

J

Power supply cord with

3-prong grounding plug

Cast

Self-CleaningOven

ElectronicOvenControls

withClockandKitchenTimer

SurfaceBurner

ControlKnobs

OvenLight

(2)Adjustable
OvenRacks

OnePiece
DoorHandle

BroilPan

9,500BTUor

12,000BTU

SealedBurner

RemovableSurfaceBurner
Grates(SUesandcolor

wiiivarybymodel)

9,5OOBTU

LPconvertible

StorageDrawer

GlassFrontOven

DoorwithLarge

WindowOpening

OvenVent

5,OO0BTU
SealedBurner

(LPconvertible)

12,000BTUor
14,000BTU

SealedBurner
(LPconvertible)

Note:Thefeaturesofyourrangewiltvary
accordingtomodel.

GlassorPorcelainCookTop

Sizes of the Surface Gas
Burners

Your appliance is supplied with the 4
different surface gas burners:

1 Simmer Burner (5,000 BTU)

1 or2 Standard Burners (9,500 BTU)
o1Power Burner (12,000 BTU)
o1Power Burner (14,000 BTU)

When setting up the range for
thefirsttime, make surethatthe

correct Burner Heads, Burner
Caps and Burner Grates are

Uocatedas shown in Figure 1.

Grate
Pin

Burner Ca

Burner Cap

_(Standard or

Extra. Large) _

,,--/

Standard or "POWER" Burner Head

Left Front Burner Cap_\¢._ _..
Orifice Holder

Extra Large

Burner"POWER"Head

(!2,000 BTU)

or (14,000 BTU)

Right Front

Orifice Holder

.Small Burner Cap

@<-_'SIMMER"

Burner Head
(5,000 BTU}

Right Rear
Orifice Holder

FigureI

Burner

Grate

% Electrode must be

! Figure2

I

i

Flue Covers

_ Removable

Cover

Figure 3

located properly in slot
of each Burner Head

Assembly of the Surface Burner Heads, Burner Caps,
Burner Grates and FJue Covers

It is very important to make sure that all of the Surface Burner Heads,
Surface Burner Caps and Surface Burner Grates are installed correctly and

at the correct locations.

1. Place all 4 Burner Heads in the correct locations (See Figure 1). Make
sure that the correct Burner Head is placed with the corresponding

Orifice Holder and that the Electrode is located properly in the slot of
each Burner Head (See Figure 2). Proper Burner Head placement

insures that each Bumerwill have the correct spark required for surface
gas ignition.

2. Place the correct Burner Caps at each of the burner locations (Burner
Cap Pilot Hole must face up). Each of the 4 (four) Burner Heads MUST

have a Burner Cap installed to insure proper ignition and gas flame size
and must be in place with the Pilot Hole facing up BEFORE placing the

Burner Grates (See Figure 2).

3. Place the 2 (two) cast iron Burner Grates supplied with the range.
Carefully lineup the 2 Grate Pins on each Grate with the Cap Pilot Holes

in the 2 Burner Caps on each side of the range. DO NOT force the
Burner Grates onto the Burner Caps. Forcing the grates down onto

improperly installed Burner Heads and Burner Caps may damage the
gas burners. Each Burner Cap is designed with aCap Pilot Hole in the

top center of the Cap. Visually check that ALL the Grate Pins line up
into the Burner Cap Pilot Holes (See Figure 2). Properly installed

Burner Grates will rest with all four Grate legs on the glass cooktop.

4. Place the 2 (two) flue covers over the inner vent cover as shown on
figure 3.

REMEMBER-- DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS
OR ANY OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER

OPENING, Always keep the Burner Caps and Burner Heads in place
whenever the surface burners are in use,

ControJ Locations of the Gas Surface Burners

Your range is equipped with gas surface burners with 3
different BTU ratings. The ability to heat food quicker and
in iarger volumes increases as the burner size increases.

The small StaMMER burner is best used for simmering
deHbate sauces, etc. This burner is located at the right rear

burner position on the cooktop (see figure 1).
The STANDARD burners can be used for most surface

cooking needs. The 2 burners are located atthe Heftfront and

rear burner positions on the cooktop (see figure 1).

The POWER bumeris best used forbringing iargequantitbs
of Hquid rapidly up to temperature or when preparing larger
quantities of food. The POWER burner is located at the Heft
front burner position on the cooktop (see figure 1).

Regardless of size, always select cookware that is suitable
for the amount and type of food being prepared. Select a
burner and flame size appropriate to the pan. Never allow
flames to extend beyond the outer edge of the pan.

LEFT 00 LEFT O0

REAR O0 FRONT 00

Figu re 1

OFF

bi

\

reed

Figure2

Do not place pJastic items such as saJt and pepper shakers, spoon holders or pJastic wrappings on

top of the range when it is in use. These items could melt or ignite. Pothoiders, towels or wood spoons could catch fire
if piaced too chose to a flame.

in the event of an electrical power outage, the surface burners can be lit manually, To light a surface burner, hold a lit match
to the burner head, then slowly turn the surface control knob to UTE, After burner lights turn the knob to desired setting, Use
caution when lighting surface burners manually,

O0 R_GHT00 RIGHT

00 FRONT O0 REAR

Operating the Gas Surface ControJs:

1. Piace cooking utensii on surface burner.

2. Push the surface control knob down and turn counterclockwise out of the OFF
position.

3. Release the knob and rotate to the LMTEposition (see figure 2). Note: AiMfour
electronic surface ignitors wiil spark at the same time. However, only the burner you
are turning on wiil ignite.

4. Visualiy check that the burner has a flame.

5. Turn the control knob counterclockwise to the desired flame size. The control
knobs do not have to be set at a particular setting. Use the knob indicator settings

to adjust the flame as needed. DO NOT cook with the surface control knob in the
LMTEposition. (The electronic ignitor wiil continue to spark if the knob is Heftin the
LMTEposition.)

Setting Proper Surface Burner Flame Size

For most cooking ° start on the highest control setting and then turn to a lower
one to complete the process, Use the recommendations below as a guide for
determining proper flame size for various types of cooking, The size and type of

Correct utensil used and the amount offood being cooked will influence the setting needed,

*Flame Size

High Flame

Medium Flame

Low Flame

incorrect

Never extend the flame beyond the outer]
edge ofthe utensil, A higher flame simply/

wastes heat and energy, and increases /
the risk of being burned by the gas flame, /

*Note: Settings are based on using medium-weight metal or aluminum pans. Settings mayvary when using other types
of pans. The color of the flame is the key to proper burner adjustment, Agood flame is clear, blue and hardly visible in a well-
lighted room, Each cone of flame should be steady and sharp, Adjust or clean burner if flame is yellow-orange,

For deep fat frying - use a thermometer and adjust the surface control knob
accordingly, if the fat is too cool, the food will absorb the fat and be greasy, if the
fat is too hot, the food will brown so quickly that the center will be undercooked,

Do not attempt to deep fat fry too much food at once as the food will neither brown

nor cook properly,

]

Type of Cooking

Start most foods; bring water to a boil; pan broiling,
Maintain a slow boil; thicken sauces, gravies; steaming,
Keep foods cooking; poach; stewing,

Air Circulation in the Oven
if using 1 rack, place in center of oven, if using multiple racks, stagger

cookware as shown,

For best air circulation and baking results allow 2-4" (5-10 cm) around the
cookware for proper air ci rculation and be sure pans and cookware do not touch
each other, the oven door, sides or back of the oven cavity, The hot air must
circulate around the pans and cookware in the oven for even heat to reach

around the food,

10

1 Oven Rack

Multiple Oven Racks

Somemodelsareequipped with a Mower which rune in baking and se[f-cJeaning mode to keep

a[[ internal components at a coo[ temperature. It is possible that the blower keeps running even if the range has
been turned off, until the components have cooled down.

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN), Always use oven
mitts when the oven is hot,

Oven Vent Location

The oven vent is located in the center
rear on the cooktop, When the oven is

on, warm air passes through the vent,
This venting is necessary for proper air

circulation in the oven and good baking

results, DO NOT BLOCK OVEN VENT,
Never close off the openings with

aluminum foil or any other material

OVEN VENT

(,/ © r:n, F_,_ ............._ _ m-,, _)

@

Removing and Replacing Oven

Racks

To remove, pu[[ the rack forward until it
stops. Lift up front of rack and slide out.

To replace, fit the rack onto the guides
on the oven wails. Tilt the front of the

rack upward and slide the rack back into

place.

RECOMMENDED RACK POSITIONS FOR

BRO[UNG, BAKING & ROASTING

Food

Arranging Oven Racks
To bake on a single rack, place the
rack in position 2 or 3. To bake on 2
racks, place the racks in positions 2

and 3.

/

Broiling meats, chicken or fish 1 or 2

Cookies, cakes, pies, biscuits &muffins 2 or3

Frozen pies, angel food cake, yeast, bread, 4

casseroles, small cuts of meat or poultry
Turkey, roast or ham 4

Note: Always use caution when removing food.

Refer to the Electronic Oven Control Guide for oven settings,

11

Oven Baking

For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc,,, There is no need to
preheat the oven for roasting meat or baking casseroles,

The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance,

Baking Problems and Solutions Chart

Baking Causes Corrections
Problems

Cookies and bis-
cuits burn on the
bottom.

Cakes too dark on
top or bottom.

Cakes not done in
the center.

Cakes not level.

Cookies and biscuits put into
the oven before the preheating
time is completed,

Oven rack overcrowded,

Dark pan absorbs heat too fast,

o Cakes put into the oven before

preheating time is completed,

Rack position too high or low,

Oven too hot,

o Oven too hot,

o incorrect pan size,

Pan not centered in oven,

o Range not level,

Allow oven to preheat to the selected temperature be-

fore placing food in oven,

o Choose pan sizes that will permit 5,1 cm to 10,2 cm (2"

to 4") of air space on all sides when placed in the oven,

Use a medium-weight aluminum baking sheet,

o Allow oven to preheat to the selected temperature be-

fore placing food in the oven,
Use proper rack position for baking needs,
Set oven temperature 25°F/12°C lower than recom-

mended,

o Set oven temperature 25°F/12°C lower than recom-

mended,

o Use pan size suggested in recipe,

Use proper rack position and place pan so there is 5,1

cm to 10,2 cm (2" to 4") of space on all sides of pan,

o Place a marked glass measuring cup filled with water

on the center of the oven rack, If the water level is un-

even, refer to the installation instructions for leveling

Foods not done

when cooking time
is up.

o Pan too close to oven wall or

rack overcrowded,

o Pan warped,

Oven too cool,

o Oven overcrowded,

o Oven door opened too fre-

quently,

o Be sure to allow 5,1 cm to 10,2 cm (2" to 4") of clear-

ance on all sides of each pan in the oven,

o Do not use pans that are dented or warped,

Set oven temperature 25°F/12°C higher than suggested

and bake for the recommended time,

o Be sure to remove all pans from the oven except the

ones to be used for baking,

o Open oven door only after shortest recommended bak-

ing time,

12

Broiling

Broiling is a method of cooking tender cuts of meat by direct heat under the broil ebment of the oven.

Preheating

Preheating is suggested when searing rare steaks. (Remove the broiler pan before preheating. Foods wHUstick if pUacedon hot

metaL) To preheat, set the controU(s) to BR©UL as instructed in the Owner's Guide. Wait for the element to become red-hot,
usually about 2 minutes. Preheating is not necessary when broiling meats welPdone.

To Broil

Broil on side until the food is browned; turn and cook on the second side. Season and serve. Always pull rack out to the "stop"
position before turning or removing food.

Determine Broiling Times

Broiling times vary, so watch the food closely. Time not only depends on the distance from element, but on the thickness and
aging of meat, fat content and doneness preferred. The first side usually requires a few minutes longer than second. Frozen
meats also require additional time.

Broiling Tips

The broiler pan and it grid allow dripping grease to drain and be kept away from the
high heat of the broiler.

DO NOT use the pan without its grid. DO NOT cover the grid with foit. The
exposed grease could ignite.

Should an oven fire occur, close the oven door and turn off the

oven, if the fire continues, throw baking soda on the fire or use fire extinguisher, DO
NOT put water or flour on the fire, Flour may be explosive,

Broi_er C_ean-Up Tips:

To make cleaning easier, fine the bottom of the broiler pan with aluminum foil, DO
NOT cover the broiler grid with foil,
Toprevent grease from baking on, remove the broiler pan from the oven as soon as
cooking is completed, Use hot pads because the broiler pan is extremely hot, Pour off grease, Soak the pan in HOT, soapy

water,
Clean the broiler pan as soon as possible after each use, if necessary, use soap=filled steel wool pads, Heavy scouring may

scratch the grid,

13

Seff-C eaning

During the Self-Cleaning

cycle, the outside of the range can become
very hot to the touch. DO NOTleave small
children unattended near the appliance.

The health of some birds

is extremely sensitive to the fumes given
off during the Self-Cleaning cycle of any
range. Move birds toanother well-ventilated

room.

DO NOT line the oven

walls, racks, bottom or anyother part of the
range with aluminum foit. Doing so will
destroy heat distribution, produce poor
baking results and cause permanent
damage tothe oven interior (aluminum foil
will melt to the interior surface of the oven).

DO NOT force the oven

door open, This can damage the automatic
door locking system, Use caution when
opening the door after the Self-Cleaning
cycle is completed, The oven may still be

VERY HOT,

Seff-C_eaning Oven

A Self-Cleaning oven cleans itself with high temperatures (well above cooking
temperatures) which eliminate soils completely or reduces them to a fine

powdered ash you can wipe away with a damp cloth,

Adhere to the following cleaning precautions:

o DO NOT useoven cleaners oroven protective coatingsin oraround any part

of the Self-Cleaning oven.

o DO NOTclean the oven door gasket. The woven material ofthe oven door

gasket is essential fora good seal. Care should be taken not to rub, damage
or remove the gasket.

o DO NOT use any cleaning materials on the oven door gasket. Doing so

could cause damage.

Remove the broiler pan and insert, aHutensils and anyaJuminum fo&

These items cannot withstand high cteaning temperatures,

o Oven racks do not have to be removed, if they are not removed during the

Self-Clean cycle their color wiii turn slightly blue and the finish wiii be dull.
After the cycle is complete and the oven has cooled, rub the sides of the
oven racks with wax paper or a cloth containing a small amount of salad
oil (this wiii make the racks glide easier into the rack position).

o Remove any excessive spHIovers in the oven cavity before starting the

Self-Cleaning cycle, To clean, use hot, soapy water and a cloth, Large

spillovers can cause heavy smoke or fire when subjected to high
temperatures, DO NOT allow food spills with a high sugar or acid content

(such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on
the surface as they may leave a dull spot even after cleaning,

o Clean any soil from the oven frame, the door liner outside the oven door

gasket and the small area at the front center of the oven bottom, These
areas heat sufficiently to burn soil on, Clean with soap and water,

NOTE: Prior to setting the Self-Clean cycle, any spills remaining on the oven
bottom should be removed.

What to Expect during C_eaning:
While the oven is in operation, the oven heats to temperatures much higher

than those used in normal cooking, Sounds of metal expansion and contrac-
tion are normal, Odor is also normal as the food soil is being removed,

Smoke may appear through the oven vent,

if heavy spillovers are not wiped up before cleaning, they may flame and

cause more smoke and odor than usual. This is normal and safe and should

DO HAND

/

CLEAN DOOR

Note: See additional cleaning information
for the oven door in the General Care &

CJeaning section.

DO NOT HAND

CLEAN SEAL

not cause alarm, if available, use an exhaust fan during the self-cleaning

cycle.

NOTE: A smoke eliminator in the oven vent converts most of the soil into a

colorless vapor,

To Set the Seff-C ean Cycle

Refer to the Oven Control Guide for Self-Clean Cycle settings,

14

Surfaces HowtoClean
Aluminum(trim pieces)& Usehot,soapywateranda cbth,Drywithacleancbth,

Vinyl
Glass,Paintedand Plastic Forgeneralcleaning, usehot, soapywaterandacloth, For more difficult soils and built-

Body Parts, Control Knobs & up grease, appUy a Hquid detergent direcdy onto the soil, Leave on soil for 30 to 60
Decorative Trim Pieces minutes, Rinse with a damp cbth and dry, DO NOT use abrasive cbaners on any of these

materiaUs; they can scratch,

Control Panels Before cleaning the controlpane/, turn aHcontroUsto OFF and remove the controU knobs,

To remove, pull each knob straight off the shaft, Cban as instructed above, Squeeze
excess water from the cbth before wiping the paneU;especially when wiping around the
controls, Excess water inor around the controls may cause damage to the appliance, To

replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then

push the knob into place,

Porcelain EnameJ
Burner Grates, Cooktop

Surface, Below Cooktop,
Broiler Pan & insert, Door
Liner, Oven Bottom & Burner
Drip Pans

Stainless SteeJ (some
modeJs) Oven door & drawer
front panel

Oven Racks

Oven Door

Clean burner grates, broiler pan and insert inthe dishwasher and dry upon removal, ifsoils
are not removed, follow the cooktop cleaning instructions below,

Gentle scouring with a soapy scouring pad will remove most spots, Rinse with a 1:1
solution of clear water and ammonia,/fnecessary, cover difficult spots with an ammonia°
soaked paper towel for30 to 40 minutes, Rinse with clean water and a damp cloth, then
scrub with a soap-filled scouring pad, Rinse and wipe dry with a clean cloth, Remove all
cleaners orthe porcelain may become damaged during future heating, DO NOT use spray
oven cleaners on the cooktop,

Clean stainless steet with hot, soapy water and a dishcloth, Rinse with clean water and
a cloth, Do not use cleaners with high concentrations of chlorides or cHorines. Do
not use harsh scrubbing cleaners, Only use kitchen cleaners that are especially made
for cleaning stainless steel, Always be sure to rinse the cleaners from the surface as
bluish stains may occur during heating that cannot be removed,

Remove racks, See "To remove and to replace an oven rack" under Oven vent(s) and
racks, Use a mild, abrasive cleaner, following manufacturer's instructions, Rinse with
clean water and dry, After cleaning the racks, rub the sides of the racks with wax paper
or a cloth containing a small amount of baby oil or salad oil (this will make the racks glide
easier into the rack positions),

Use soap &water to tho roughly clean the top, sides and front ofthe oven door, Rinse well,
You may use a glass cleaner on the outside glass of the oven door, DO NOT immerse
the door inwater, DO NOT spray or a!low water or the glass cJeanet to enter the door
vents. DO NOT use oven cleaners, cleaning powders or any harsh abrasive cleaning

materials on the outside of the oven door,

DO NOT clean the oven door gasket, The oven door gasket ismade of a woven material,
on Self-Cleaning models, which is essential for a good seal, Care should be taken not to

rub, damage or remove this gasket,

15

Ceramic Glass Cooktop Cmeaning and Maintenance (Some models)

Consistent and proper cleaning is essential te maintaining your ceramic glass ceektop

Specia_ Caution for A_uminum Foil and A_uminum Cooking Utensils

1) AJuminum foit
Use of aluminum foil will damage the cooktop, Do not use under any circumstances,

2) AJuminum utensils

The melting point of aluminum being much lower than that of other metals, care must be taken when aluminum pots or

pans are used, If allowed to boil dry, not only will the utensil be ruined, but also permanent damage in the form of breakage,

fusing or marking may affect the ceramic glass surface,

Sliding aluminum or copper clad bottom pans on the cooktop can cause metal
markings on the cooktop surface, These marks should be removed immediately
after the cooktop has cooled using the cooktop cleaning cream, Metal marks can
become permanent if not removed prior to future use,

Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or
scratch the cooktop surface, Do not elide anything metaJ or gJaee across the
cooktop, Do not use your cooktop as a cutting board or work surface in the
kitchen, Do not cook foods directly on the cooktop surface without a pan, Do
not drop heavy or hard objects on the glass cooktop, they may cause it to crack,

Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL,

DO NOT use a cooktop cleaner on a hot cooktop, The fumes can be hazardous to your health, and can

chemically damage the ceramic=glass surface,

Things to Remember

1, AVOID using bleach and don't use ammonia to clean the

ceramic surface,

2, Do not put plastic items on warm cooking areas,
3, Never slide oven racks across cooktop surface, They may

scratch or metalmark the cooktop,

4, if cooktop should break, do not use cooktop or attempt to

ctean it. Call your authorized service technician immedi-
ateJy.

5, Never use a trivet or metal stand between the cooking utensil

and the ceramic cooktop, The ceramic surface may be

scratched, metal marked or etched by such items,

6, Sugary spills can cause pitting of your cooktop surface,

Therefore, you must begin cleaning the spills while the cooktop

is still hot, Use caution when following the steps below,

a) Turn off all surface units and remove all pans

b) Wearing an oven mitt, use a razor blade scraper to scrape

the hot spill out of the cooking zone to a cooler area on the
cooktop,

c) Allow the cooktop to cool,

16

Ceramic Glass Cooktop C_eaning and Maintenance (Some mode_s)
Use and Care of G_ass Surface

ProMem Cause To Remove

Fine "brown lines
(tiny scratches or

abrasion which
have collected
soil).

Metal marking
(mark or black
marks).

Brown streaks
and specks.

Coarse particles (salt, sand, or
grit) between bottom of cook-
ware and cooktop that are not re-
moved before cooking.

Using incorrect cleaning materi-
als.

Sliding or scraping metal uten-
sils or oven shelves across

cooktop.

Cleaning with a sponge or dish-
cloth that has been used for

other kitchen tasks.

To Prevent
Clean cooktop after every

Use,

Use cleaner creme daily,

Do not slide cookware
across cooktop.

Use cleaner creme with
clean damp paper towel.

Tiny scratches are not removable.
They can be minimized by continual

use of cleaner creme. Such scratches
do not affect cooking.

Apply cleaner creme with dampened
paper towel to a cooled surface.

Use a small amount of cleaner creme
with ciean, damp paper towel.

NOTE: Due to the high intensity of heat generated by the surface eUements, the gUasssurface wHUturn green when the

eUementwHUbe turned off, This phenomenon is normal and the glass will come back to its original white color after it
has completely cooled down, (White glass cooktops only),

C_eaning Materials for Ceramic GLass Cooktop

Some cleaning materials may contain an ingredient which can damage the cooktop, Use
recommended materials only (see below), Cleaner cream should be used regularly, Prior to using
your cooktop for the first time, apply a cleaner cream to the ceramic surface, A sample of CERAMA

BRYTE® cleaner cream is supplied with your range, More are available in stores if needed,
Use only recommended cleaning products and follow these basic cleaning suggestions,

1, BEFORE THE COOKTOP IS USED, Thoroughly clean and saturate the cooktop with cleaner

cream,
a) Dampen clean paper towel and clean unit,

b) Wipe off with another clean, damp paper towel; then wipe dry.

2, For normal daily cleaning, apply a dab of cleaner cream in the center of each unit-area to be

cleaned, Start with approximately 1/8 teaspoon, (Apply more if needed), Then, proceed as stated

above in (a and b),
3, Make sure bottom of cookware and cooking area are clean and dry,
4, Select heat settings and cookware large enough for food and liquid, This stops boilovers and

spatterings,

5, Wipe up food spills and spatters before they burn into surface,

r

BRYTE

CERAMA BRYTE®

(Cmeaner cream for

ceramic cooktops)

IMPORTANT Regularly use cleaner cream, If you run out of cleaner cream, use one of the clean-

ers listed, Be sure to get a new supply of cleaner cream,

Never mix cleaning products! Mixtures may interact, with damaging or hazardous

results,

17

Ceramic G_asa Cooktop C_eaning and Maintenance (some mode_s}
Use and Care of G_ass Surface

Do Use on Ceramic Glass Cooktop
1, Baking soda,
2, Non=impregnated plastic and nylon pads,
3, For burned on material, scrape with single=edged razor blade, held at a 30° angle,
4, Ceramic glass cleaning cream,
5, CERAMA BRYTE® cleaner cream,

Do not Use on Ceramic Glass Cooktop
1, Avoid pads, that can leave marks and scratches,

2, Avoid heavy-duty cleansing powders, these can scratch, depending on their abrasiveness and cleaning pressure applied,
3, Avoid chemical oven cleaners, These can etch the cooktop surface and are caustic,

4, Avoid rust stain removers containing hydrofluoric acid,
5, Avoid using bleach and don't use ammonia,

Specia! Cleaning instructions for Mineral Deposits and Discolorations
Problem: A gray brown stain that is not removed when using cleaner cream,

Cause: Condensation, when cooking, often collects and drips from cookware, The mineraUsfound in water suppUyand foods

may cause a gray or brown film to deveUopon cooktop, This film is so thin it cannot be feUtand appears to be under
cooktop,

To Prevent: Dally and proper use of cleaner cream,

To Remove:

- Wet surface with waterand sprinHe on deanercream,

- Scrub with clean, damp paper towel until stain disappears,

- Clean remaining paste away with damp paper towel,

- Apply dab of cleaner cream and polish with a clean paper towel,
WARNING

- Do not use cleansers on a heated surface, Fumes could be hazardous, Wait for area to cool before cleaning,

- Do not use cleaner cream to clean porcelain, paint or aluminium,

18

Surface
Burner
Grate

C_eaning the Burner Grates, Burner Caps, Burner Heads

The Bumer Grates, Burner Caps, and Burner Heads should be routinely cleaned,

Keeping the burner ports clean will prevent improper ignition and an uneven flame

at each burner position, Refer to the following instructions:

To Remove and RepJace the Surface Burner Grate, Surface Burner Cap and

Surface Burner Head - Remove in the following order; (1st) Surface Burner Grate,
(2nd) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1),

Figure 1

Surface

Orifice

holder

Surface Burner Surface Burner OuterVent

Grate Caps Covers

Reverse the procedure above to replace the Surface Bumer Cap, Surface Burner
Head and Surface Burner Grate, Do not remove any burner parts from the

cooktop until the burner parts have completeJycooled and are safe to handle.

Do not operate the surface burners without the Surface Burner Caps, Surface
Burner Heads and Surface Burner Grates property in ptace.

To Ctean the Burner Caps, Burner Heads and Grates- Use a soap-filled scou ring

pad ora mild abrasive cleanser to dean the surface burner caps and surface bumer
heads, The Grates and the outer vent covers are designed to be Dishwasher safe

for cleaning, The ports (or slots) around the bumer heads must be routinely denned,

If residue still remains in these ports, use a smaDgauge wire or needle to clean the
slots or holes, For proper flow of gas and ignition of the burner--DO NOT ALLOW

SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERNAL TO ENTER
THE GAS ORIFICE HOLDER OPENING. ALWAYS keep the surface burner cap
and surface burner head in place whenever a surface burner is in use,

Surface Burner

Heads

@@

THE COOKTOP iS NOT REMOVABLE. Do not attempt to remove or lift the cooktop,

THE iNNER VENT iS NOT REMOVABLE. Do not attempt to remove the inner vent cover,

Use caution when replacing the burner cap so the electrode isnot damaged, This may cause a delayed ignition

or prevent the burner from igniting,

Any additions, changes or conversions required in order for this appliance to perform satisfactorily must be

made by authorized servicer,

19

Lockengaged

for door removal

Figure 1

Care and C_eaning of Stainless Stee_ (Stainless Steel models only)
Some modeUsare equipped with stainUesssteeUexterior parts, SpeciaUcare and cUeaningare

required for maintaining the appearance of stainUessparts, PUeaserefer to the tabUeprovided
at the beginning of the General Care & Cleaning section in this Use & Care Guide,

Removing and Replacing the Oven Door

_The door is heavy, For safe, temporary storage, lay the door fiat with the inside
of the door facing down,

To Remove Oven Door:
1, Open the door to the fully opened position,

2, Pull up the lock located on both hinge supports and engage it in the hinge levers

(Figure 1),You may have to apply a little downward pressure on the door to pull the

3, Grab the door by the sides, pull the bottom of the door up and toward you to disengage

the hinge supports, Keep pulling the bottom of the door toward you while rotating the top
of the door toward the range to completely disengage the hinge levers (Figure 2),

4, To clean oven door, follow the instructions provided in the GeneraJ Care & Cleaning

table,

HINGE SLOT

Door removed from the range

Figure 2

Lock in normal

position

Figure 3

To RepJace Oven Door:
1, Grab the door by the sides; place the hinge supports in the hinge slots, Open the door to

the fully opened position,

2, Disengage the lock from the hinge levers on both sides (Figure 3),

Note: Make sure the hinge supports are fully engaged before unlocking the hinge levers,

3, Close the oven door,

Specia! Door Care instructions - Most oven doors contain glass that can break,
Read the following recommendations:

1, Do not close the oven door until all the oven racks are fully in place,
2, Do not hit the glass with pots, pans, or any other object,

3, Scratching, hitting, jarring or stressing the glass may weaken its structure causing an

increased risk of breakage at a later time,

Removing and Replacing the E×terna_ Door G_ass Pane_

Applicable only to models with an external glass panel not held with frame, This design allows
you to clean the inside face of the exterior door panel as well as the hidden face of the door
inner glass,

To Remove the ExtemaJ Door Glass Panel:
1, Remove the door as described in Removing and Replacing the Oven Door section and

lay the door flat,
2, Using a screwdriver, remove the 5 screws fastening the glass & molding assembly,

3, Grasp both sides of the glass panel and slowly pull it out of the door upper molding, Lay
the glass flat,

To RepJace the E×terna! Door GJaee Paneh
1, Grasp the sides of the glass panel carefully insert the glass into the door top molding,
2, Replace the 5 locking screws,
3, Replace the door onto the range,

Handle the glass panel with care, When dropped on a corner, the glass panel

may shatter, This can cause several persona injury,

2O

Storage Drawer

Use the storage drawer for storing cooking utensils, The drawer can de removed to facilitate cleaning under the range, Use
care when handling the drawer,
Toopen the storage drawer, push the drawer in gentUyand it wHUspring open, To dose, push the drawer until you hear a
dick, which indicates that the spring is compressed, and the drawer is closed,

Removing and Replacing Storage Drawer

Storage
Drawer

To remove the drawer:
1, Pull empty drawer out to the roller guide stop,

2, Tilt the drawer up and pull it out over the rollers,

To repJace the drawer:
1, Insert the rear end of the drawer into the opening,

2. Fit the drawer end rollers onto the guide rails,
3, Push the drawer in until it stops, then lift to allow the rollers to clear the roller

guide stop, and push in,

Changing Oven Light

Be sure the oven is unplugged and all parts are COOL before replacing the oven light bulb, Do not turn the oven

light on during a self-cleaning cycle, High temperature will reduce lamp life,
On some models an interior oven light will turn on automatically when the oven is opened,

The oven light may be turned on when the door is closed by using the oven light switch located on the Electronic Oven control,
The oven light bulb is covered with a glass shield held in place by a wire holder, THIS GLASS SHIELD MUST ALWAYS BE

IN PLACE WHEN THE OVEN IS IN USE.

To Replace the Light Bulb:

BE SURE OVEN IS COOL

1, Turn the power off at the main source,

2. Wear a leather-faced glove for protection against possible broken glass,
3, Replace bulb with a 40 Watt appliance bulb only,
4, For self-cleaning oven, press wire holder to one side to release glass shield, change bulb and be

sure to replace glass shield,

For instructions on how to adjust the oven temperature refer to the electronic oven control guide,

21

So/utions to Common Problems

OCCURRENCE

Range is not level

Cannot move appliance easily.
Appliance must be accessibme for

service.

Entire range or oven does not operate. Make sure cord/plug is plugged tightly into outlet.

POSSmBLE CAUSE/SOLUTmON

Poor instaIIation. Place oven rack in center of oven. Place a level on the oven rack.

Adjust bveling legs at base of range until the rack is Ievek When range is level,
cooktop may appear out of alignment if countertop is not bvek

Weak, unstable floor. Be sure floor is level and can adequately support range. If floor
is sagging or slopping, contact a carpenter to correct the situation.

Kitchen cabinet misaIignment may make range appear to be unleveL Be sure
cabinets are square and have sufficient room for range clearance.

Cabinets not square or are built in too tight. Contact a cabinet maker to correct the
problem.

Contact builder or installer to make appliance accessible.

Carpet interferes with range. Provide sufficient space so range can be lifted over
carpet.

Gas Iine is hard@Iumbed. Have a flexible C.S.A international approved metal
appliance connector installed.

Service wiring is not complete. Call an authorized servicer.

Electrical power outage. Check house lights to be sure. CalI your local electric

company for service. Surface burners can be lit manually.

*Oven contro_ beeps and displays any F Electronic control has detected a fault condition. Press STOP/CLEAR to clear the
code error (for exampme Fll) display and stop beeping. Reprogram oven. If fault recurs, record fault number. Press

STOP/CLEAR and call an authorized servicer for assistance.

Oven light does not work.

Surface burners do not might,

Surface burner flame burns haft way
around.

Replace or tighten bulb. See Changing Oven Light section in this Use & Care Guide.

Electrical power outage. Check house lights to be sure. CalI your local ebctrb

company for service.

Surface control knob has not been completely turned to LITE. Push in and turn the
surface control knob to LITE until burner ignites and then turn the surface control
knob to the desired flame size.

Burner ports are clogged. Clean burners. See "Cleaning the Burner Grates, Burner
Caps and Burner Heads" under General Cleaning.

Range power is disconnected from outlet. Be sure cord is securely plugged into the

outlet.

Electrical power outage.

Be sure the gas supply to the range is turned "ON".

Burner ports or slots are clogged. With the burner off, use a smalPgauge wire or
needle to clean ports or slots.

Moisture is present after cleaning. Lightly fan the flame and allow the burner to
operate until flame is full. Dry the burners thoroughly following instructions under
General Cleaning.

22

Solutions to Common Problems

Surface burner flame is orange. Dust particles in main line= Allow the burner to operate a few minutes until flame

turns blue=

SaIt air in coastal areas. A slightiy orange flame is unavoidable=

Poor baking results. Many factors affect baking results. Make sure the proper rack position is used.

Center food in the oven and space pans to allow air to circulate. Allow the oven to

preheat to the set temperature before placing food in the oven. Try adjusting the
recipes' recommended temperature or baking time. if you feeI the oven is too hot or

cool, see "Recalibrafing Your Oven Temperature" section in the Electronic Oven
Control Guide.

Fan noise during cooking operation. A cooling fan may automatically turn on and off to cool internal parts= It is normal,

and the fan may continue to run even after oven is turned off=

Flames inside oven or smoking from Excessive spillovers in oven= Set self-clean cycle for a longer cleaning time=
vent.

Excessive spillovers in oven= This is normal, especially for pie spilIovers or large
amounts of grease on the oven bottom. Wipe up excessive spillovers before starting
the self-clean cycle. If flames or excessive smoke are present, stop the self-clean
cycle and follow the steps under "Stopping or Interrupting the Seff-Cmeaning
Cycle" in the Electronic Oven Control Guide=

Oven smokes excessively during
broiling.

Setf-c_eaning cycme does not work. Control(s) not set properly= Follow instructions under "Oven Cleaning" in the

Soil not completely removed after serf=
cleaning cycle.

Meat is too close to the element. Reposition the rack to provide proper clearance

between the meat and the oven boil element.

Meat is not properly prepared. Remove excess fat from meat. Remove remaining
fatty edges to prevent the meat from curling, but do not cut into the lean of the meat.

Broiler pan used without the Broiler Pan Insert or insert is covered with foil. DO NOT

use the Broiler Pan without the Broiler Pan Insert or cover the insert with foil=

Broiler Pan or Broiler Pan Insert needs to be cleaned. Excessive smoking is caused

by buildup of grease or food spatters. Clean the Broiler Pan and Insert on a regular

basis=

Oven door is open. Oven door should be closed when broiling.

Electronic Oven Control Guide=

Self-cleaning cycle was interrupted. Stop time must be 2 to 4 hours past the start
time= Follow steps under "Stopping or _nterrupting the Seff-Omeaning Cycle" in the

Electronic Oven Control Guide=

Set Self-CIean cycle for a longer cleaning time=

Failure to clean bottom front, top of oven or door areas outside oven seal These
areas are not in the Self-Cleaning area, but get hot enough to burn on food residue.
Clean these areas before starting the SeIf-Clean cycle= Burned-on residue may be
cleaned with a stiff nylon brush and water or nylon scrubber= Be careful not to
damage the oven gasket.

Excessive smoking from oven vent, Excessive spiIIovers in oven, especiaIIy for pie spillovers or large amounts of grease

on the oven bottom. Wipe up excessive spillovers before starting the Self-Clean
cycIe. If flames or excessive smoke are present, stop the Self-Clean cycte and follow
the steps under "Stopping or interrupting the Seff_Omeaning Cycle" in the

Electronic Oven Control Guide=

23

MMtTED WARRANTY

Your Range is protected by this warranty

WARRANTY THROUGH OUR AUTHORIZED THE CONSUMER WiLL BE

PERIOD SERVICERS WE WILL: RESPONSIBLE FOR:

FULLONE-YEAR One year from original Pay all costs for repairing or replacing any parts of this Costs of service calls that are listed under NORMAL
WARRANTY purchase date. appliance which prove to be defective in materials or RESPONSJBEUTIESOF THE CONSUMER.*

UMITED 2ND"5TM Second through fifth years Provide a replacement for any defective surface heating Diagnosticand anytransportation and labor costs which
YEARWARRAN'r{ fromoriginalpurchasedate, element,deterioratedrubberized-siliconeseal(upsweptmodels are required because of service,
(GUassSmoothtop, only), or glass smoothtop that crack due to thermal breakage
SeaU&Elements) (not customer abuse),

UMITEDWARRANTY Time periods listed above, All of the provisions of the full and limitedwarranties above Costsofthetechnician'straveltothe homeandanycosts
(Applicable to the and the exclusions listed below apply, forpickup and deliveryoftheappliancerequiredbecause
State of AUaeka) of service,

Inthe U.S.A. your appliance is warranted by Electrolux Home Products, inc. In Canada, your appliance is warranted by Electrotux Canada Corp. We authorize
no person to change or to add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed

by us or an authorized servicer.

workmanship.

*NORMAL
BESPONSIBILmES

OFTHECONSUMEB

EXCLUSIONS This warranty does not cover the following:

IFYOU NEED
SEBVmCE

This warranty only applies in the 50 statesof the U.S.A. Puerto Rico,and Canada.Productfeaturesor specifications as describedor illustrated are subjectto changewithout

notice. All warranties are made by ElectroluxHome Products, Inc. or Electrolux Canada Corp.

USA

800_944_9044

Electrolux Home Products, Inc.
P.O. Box 212378

Augusta, GA 30917

This warranty applies only to products in ordinary household use, and the consumer is responsible for
the items misted below:

1. Proper use of the appliance in accordance with instructions provided with the product.

2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in
accordance with all local plumbing, electrical and/or gas codes.

3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose
connections or defects in house wiring.

4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc. which
are not a part of the appliance when it was shipped from the factory.

5. Damages to finish after instalMtion.

6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).

1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES
RESULTING FROM ANY BREACHOFTNIS WRITTEN OR ANY IMPLIEDWARRANTY.

Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation
or exclusion may not apply to you.

2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in ordinary
household use. The consumer shall pay for such service calls.

3. Damages caused by services performed by servicers other than Electrolux Home Products, Inc. Electrolux Canada
Corp. or their authorized servicers; use of parts other than genuine Electrolux parts; obtained from persons other

than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.

4. Products with original serial numbers that have been removed or altered and cannot be readily determined.

Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the warranty
period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This

written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service
under this warranty must be obtained by contacting Electrolux Home Products, Inc. or Electrolux Canada Corp.

2004 02

Canada
866_294.9911 {English or French)

Electrolux Canada Corp.
8150 McLaughlin Road
Mississauga, Ontario, Canada

LSR4C2

24