Frigidaire FGS365ESF, FGS365ESE, FGB24S5DCH, FGB24S5DCF, FGB24S5ASF Owner’s Manual

...

ELECTRONIC OVEN CONTROL

Control Pad Functions

Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the

various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those shown. This doesn't change the way it operates.

Note: The oven function will not work if the time of day clock is not set.

Bake Time Pad-

Clock Pad- Used to set the

time ofday.

Used to enter the length of the baking

time,

Up and Down arrow pads- Used along with the enter the normal function pads to select oven temperature, cooking baking mode time, start time (when programming an automatic bake _temperature.

time), time of day, clean time and minute timer. /

Timer Pad- Used to set or cancel the minute timer, The minute timer does

not start or stop _ cooking.

Start Time Pad- Used to set the desired start time

for baking Can be used with BAKE /_

TIME to program a delayed bake cycle.

Oven, Preheat & Lock lights- The "oven" light will glow each time the oven unit turns on maintain the set oven temperature, The "Preheat" light will glow when the oven is first set to operate, or if the desired temperature is

reset higher than the actual oven temperature. The "Door Locked" light will flash until the door locks when the self-clean cycle is in use. it glows constantly after the door locks.

• Oven

b Preheat O

J• DoorLocked

Self-Cleaning Oven ,

Bake Pad- Used to

Clear Pad- Used to clear any function previously entered except the time of day and minute timer. Push Clear pad to stop cooking.

Feature indicator lights- These light

to show which feature is in use.

Broil Pad- Used to select the variable

broil function.

Clean Pad- Used to selectthe self-

cleaning cycle.

The oven can be programmed to:

Bake normally, Time Bake, Delayed Bake, Broil, Self-Clean Note: Push buttons or pads may be shaped differently.

For a silent control panel:

When choosing a function, abeep will be heard each time a pad ispushed. Ifdesired, the controls can be program med for silent operation. Push and hold START TIME pad. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad ispushed. To return the sound, push and hold START TIME pad again for 7 seconds until 1beep isheard. Note: The control will return to the audible mode after a power outage.

Tem perature Conversion (Fahrenheit / Celsius)

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550 °F (65°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Push BROIL pad. "- - -" appears in the display.

2. Push and hold the UP ARROW pad until "HI" appears in the display.

3. Push and hold BROIL pad until °F or °C appears in the display.

4. Push UP or DOWN ARROW pad to change °F to °C or °C to °F.

5. Push any function pad to return to normal operating mode.

Printed in United States 318200184 (0502)Rev.A

Setting the Clock and Minute Timer

mWooe

• • •Oven 0

• Door Locked

• - , Self-Cleaning Oven , - •

Note: The oven function will not work ifthe time of day clock is not set.

To Set the Clock

When the range isfirst plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00".

1. Push CLOCK pad.

2. Within 5 seconds, push and hold the UP or DOWN ARROW pad until the correct time of day appears in the display. Note: The clock cannot be changed during any timed bake or self-clean cycle.

To Set the Minute Timer

1. Push TIMER ON/OFF pad.

2. Push the UPARROW pad to increase the time in one minute increments. Push and hold the UP ARROW pad to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If you push the DOWN ARROW pad first, the timer will advance to 11 hours and 59 minutes.

3. The display shows the timer count down in minutes until one minute remains. The display will count down in seconds.

4. Whenthesettimehasrun_ut_thetimerwi__beep3times__twi__c_ntinuet_beep3timesevery6_sec_ndsunti_theT_MER ON/OFF pad is pushed.

Note: The min ute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other mode, the minute timer will be shown in the display. To view other functions, push the function pad for that mode.

o0e

To Change the Minute Timer while it is in use: While the timer is active and shows inthe display, push and hold the UP or DOWN ARROW pad to increase ordecrease the

time.

To Cancel the Minute Timer before the set time has run out: Push TIMER ON/OFF pad,

Setting Oven Controls

06®

• DoorLocked s

• • • Self-Cleaning Oven • . •

Note: The oven function will not work if the time of day clock is not set.

To Set or Change the Temperature for Normal Baking

The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).

Note: The oven control has a built-in safety feature that will shut off the

oven if the control is left on for more than 11hours 59 minutes•

To Set the Controls for Normal Baking:

1. Push BAKE pad."- "appears in the display•

2. WithinSseconds,pushtheUPorDOWNARROWpad. Thedisplaywillshow"350°F(177°C)."ByholdingtheUPorDOWN ARROW pad, the temperature can then be adjusted in 5°F (1°C) increments•

3. As soon as the UP or DOWN ARROW pad isreleased, the oven willbegin heating to the selected temperature• When the oven temperature reaches the desired baking temperature, the control will beep 3 times and the Preheat light will turn off.

4. To cancel the baking function, push the CLEAR OFF pad.

To Change the Oven Temperature after Baking has started:

1. If you are using the minute timer, push the BAKE pad and make sure the bake temperature is displayed•

2. Push the UP or DOWN ARROW pad to increase or decrease the set temperature•

To Set Control for Continuous Bake or 12 Hour Energy Saving:

The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes• The oven can be programmed to override this feature for continuous baking•

To set control for continuous baking:

1. Push TIMER ON/OFF pad, "0:00" will appear in the display.

2. Push and hold TIMER ON/OFF pad down for 5 seconds until tone is heard, "---- hr" will appear in display for continuous cooking. The current time of day will return to the display.

3. To cancel the Continuous Bake Function, push TIMER ON/OFF pad and hold for 5seconds until tone is heard. "12hr" will appear indisplay indicating that the control has returned to the 12 Hour Energy Saving feature.

o0e

To Set Control for Oven Lockout:

The control can be programmed to lock the oven door and inactivate the oven controls• To Set Control for Oven Lockout feature:

1. Push the CLEAR OFF pad and hold for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator light will flash and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display.

2. T_cance_the__ck_utfeature_pushcLEAR_FFpadandh__df_r3sec_nds_Thec_ntr__wi__un__ckthe_vend__randresume normal operation.

Note: Ifany control pad is pressed while the Oven Door/Control Lockout mode, "Loc" will appear inthe display until

the control pad is released.

+ 4 hidden pages