Frigidaire FGMO205K, FGMO205KB, FGMO205KW, FGMO205KF User Manual
Microwaves
FGMO205K F/ W/ B
Signature Features
Built-In
Performance-Driven Style
Real Stainless Steel
SpaceWise™ Rack
Sensor Cooking
3 Auto Cook Options
7 User Preference Options
Side Controls
1,200 Watts
More Easy-To-Use Features
Keep Warm Setting
Auto-Start Heat Sensor
2-Level Light ( Hi / Low )
16" Glass Turntable
One-Touch Options
Add-30-Seconds
Chicken Nuggets
Pizza Slice
Baked Potato
Beverage
Capacity
2.0 Cu. Ft. Capacity
Optional Trim Kits
30" Stainless Steel – PN # MWTK30KF
30" White – PN # MWTK30KW
30" Black – PN # MWTK30KB
27" Stainless Steel – PN # MWTK27KF
27" White – PN # MWTK27KW
27" Black – PN # MWTK27KB
Overall Exterior Dimensions
Height 13-3/8"
Width 24"
Depth 19-1/8"
Available in:
Fits-More™ Microwave
Extra-large microwave provides 2.0
cubic feet of cooking space.
Over 30 Options
Versatile settings include: chicken
nuggets, soften ice cream, melt butter
and multiple snack options.
Eortless™ Reheat
Reheat almost anything at the touch
of a button.
One-Touch Options
Our microwaves feature easy-to-use
one-touch buttons so you can cook
chicken nuggets, baked potatoes or
popcorn with the touch of a button.
Stainless
(F)
White
(W)
Black
(B)
frigidaire.com
24 "
191/8"
Power cord
location (right
top rear)
133/8 "
rear
extrusion
24" Built-In Microwave (2.0 cu.ft.)
with 27"or 30" Trim Kit
Professional and Gallery
Allow at least
21" clearance for door
depth when open
1"
30"or 27"
Trim Kit Faceplate
18"
(30") 30"
(27") 27"
120V/60Hz
grounded outlet
20" min.
4"
6"
4"
243/8"min.
2411/16" max.
Bottom Duct Assembly
Outlet should NOT
be located within
shaded area UNLESS
cabinet depth is
greater than 21"
163/4"min.
17" max.
*Note: When used in combination with
another Frigidaire
®
built-in product, a
minimum clearance of 2
7
/8" required from
bottom of Built-In Microwave cutout to top
edge of companion product’s faceplate,
leaving a 2"visible gap between both
product faceplates
** Minimum cabinet width
required for installation
with optional 30" Trim Kit.
27" minimum cabinet width
required for installation
with optional 27" Trim Kit.
30"min.**
20"
min.
Trim Kit –
7
/8" faceplate
overlap
163/4"min.
17" max.
Full plywood
base required to
support 100 lbs.
24
3
/8"min.
2411/16" max.
2"
(visible
gap)*
Microwaves
FGMO205K F/ W/ B Built-In
Microwave Specifications
•
Product Shipping Weight (Approx.) – 46 Lbs. (not incl. Trim Kit)
•
Voltage Rating – 120V / 60 Hz / 15 or 20 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.7 kW
(For use on adequately wired 120V, dedicated circuit having
2-wire service with a separate ground wire. Appliance must
be grounded for safe operation.)
•
Amps @ 120 Volts = 14.3 Amps
•
Always consult local and national electric codes.
•
Microwave can stand alone on countertop or be built in with optional
30" or 27" Trim Kit (ordered by individual part number) which
includes Bottom Duct Assembly – shipped in separate box.
•
Allow 21" minimum clearance for 90° door swing.
•
Minimum 20" deep oven cutout dimension is critical for proper
installation for oven and faceplate to fit flush against cabinet front.
•
Consult local building code, in the event that cutout opening may be
required to be enclosed with sides, ceiling and rear partition.
•
Full base of solid plywood or similar material required, capable of
supporting 100 Lbs.
FRIGIDAIRE®
USA • 250 Bobby Jones Expressway • Martinez, GA 30907 • 1-800-FRIGIDAIRE • frigidaire.com
•
CANADA
FGMO205K 05/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.
5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
•
Base must be level and front of cabinet square for proper operation.
•
Grounded outlet should NOT be located in shaded area, as indicated,
UNLESS cabinet depth is greater than 21".
•
Can NOT be installed above any gas wall oven.
•
Built-In Microwave is approved to be used in combination with any
Frigidaire® Electric Single Wall Oven and /or Warmer Drawer. (Refer to
model-specific Combination Installation Specification pages on web.)
•
When used in combination with another Frigidaire® built-in product,
a minimum clearance of 2-7/8" required from bottom of Built-In
Microwave cutout to top edge of companion product’s faceplate,
leaving a 2" visible gap between both product faceplates.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions
Optional Accessories
•
30" Stainless Steel Trim Kit – (PN # MWTK30KF).
•
•
•
•
•
27" Stainless Steel Trim Kit – (PN # MWTK27KF).
30" White Trim Kit – (PN # MWTK30KW).
27" White Trim Kit – (PN # MWTK27KW).
30" Black Trim Kit – (PN # MWTK30KB).
27" Black Trim Kit – (PN # MWTK27KB).
Specifications
subject to change.
Loading...