Frigidaire FGGC3645KS, FGGC3645KW, FGGC3645KB, FGGC3645K User Manual
Drop-In Cooktops
FGGC3645K S / W/ B
36" Gas
More Easy-To-Use Features
Sealed Burner ( 12,000 BTU )
2 – Sealed Burners ( 9,500 BTU )
Low-Simmer Burner ( 5,000 - 750 BTU )
Stainless Steel Recessed Cooktop
Black / White Porcelain Cooktop
Overall Exterior Dimensions
Height 5"
Width 36"
Depth 21-3/4"
Available in:
Stainless
(S)
White
(W)
Black
(B)
Signature Features
Quick Boil
Boil water fast with our
17,000 BTU burner.
Continuous Grates
Continuous grates make it easy to
move heavy pots and pans between
burners without lifting.
Express-Select ™ Controls
Easily go from warm to boil.
Fits-More™ Cooktop
The Fits-More™ cooktop features five
burners so you can cook more at once.
frigidaire.com
30"/36" Drop-In Gas Cooktops
(Callouts MUST be charted per individual model).
Professional, Gallery & Frigidaire
Drop-In Cooktops
FGGC3645K S / W/B 36" Gas
Overall Product Dimensions Product Cutout Dimensions
A – Width B - Depth C - Height D - Width E - Depth F - Height*
36" 21-3/4" 5"
33-7/8" min.
34-1/4" max.
19-1/8" min.
19-3/4" max.
Drop-In Cooktop Specifications
•
Product Shipping Weight (approx.) – 60 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.
•
Amps @ 120 Volts = 1.0 Amps
•
Always consult local and national electric and gas codes.
•
Recommended location for grounded 120V outlet is on rear wall in an
8" wide by 10" high area, positioned 22" above floor surface and 4"
from right side of cooktop centerline. Access to underside of cooktop
and junction box must be provided for inspection and service.
•
Cooktop ships with 3/4" factory regulator.
•
LP Gas conversion kit supplied.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Allow 30" minimum clearance between top of cooktop and bottom
of unprotected wood or metal overhead cabinetry.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than 36".
•
Allow 24" minimum clearance when bottom of wood or metal
overhead cabinet is protected by not less than 1/8" flame-retardant
millboard covered with not less than No. 28 MGS sheet steel, 0.015"
stainless steel, 0.024" aluminum or 0.020" copper.
G - Cabinet
Opening
Width
8" min. 36" min. Right Rear Right Rear
•
Allow 2-1/2" minimum distance between rear edge of cutout and
nearest combustible surface above countertop.
•
Allow 7" minimum clearance from edge of cooktop to nearest
combustible wall on either side of unit.
•
Installation of drawers beneath cooktop requires minimum 8"
clearance beneath countertop surface and assured clearance for
gas and electrical connections.
•
To reduce risk of fire when using overhead cabinetry, install
range hood that projects horizontally a recommended minimum
of 5" beyond bottom of cabinets.
•
Gas Drop-In Cooktop model FGGC3645KS is approved to be used
over any Frigidaire® Electric Single Wall Oven, models FGGC3645KW
and FGGC3645KB are NOT approved for this installation. (Refer to
Gas Cooktop Installation Over 30" / 27" Electric Single Wall Oven
Specifications page on web.)
•
Gas Drop-In Cooktop model FGGC3645K is approved to be used
in combination with any Frigidaire® 36" Downdraft Vent. (Refer to
model-specific Downdraft Vent product page on web for detailed
countertop preparation specifications.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Power Supply
Connection
Location
Gas Supply
Connection
Location
Optional Accessories
•
Granite Countertop Installation Kit – (PN # 903103-9010).
FRIGIDAIRE
USA • Electrolux Major Appliances, North America • 250 Bobby Jones Expressway • Martinez, GA 30907 • 1-800-FRIGIDAIRE • frigidaire.com
•
CANADA
FGGC3645K 04/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.
Electrolux Canada Corporation • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
Specifications
subject to change.
Loading...