FFTH1022U2
HOME COMFORT
THROUGH-THE-WALL
AIR CONDITIONER/HEATER
PRODUCT DIMENSIONS
Height 14-9/16"
Width 24"
Depth 20-5/8"
MORE EASY-TO-USE FEATURES
Supplemental Heating Option
With our supplemental heating capability,
you can be comfortable regardless of the
temperature outside — you have both heating
and cooling solutions!
Sleep Mode
With Sleep Mode, the temperature gradually
increases a few degrees over the evening, saving
energy and creating a comfortable environment
during the evening hours.
Remote Control
Offers you the flexibility to control the
temperature and fan speed from anywhere
in the room.
SIGNATURE FEATURES
Eortless™
Temperature Control
Our air conditioners maintain
the preset room temperature, so
you will remain comfortable at
all times.
Programmable
24-Hour On/O Timer
With the 24-Hour On/Off Timer,
you can ensure your home will
be cool and comfortable when
you want it to be without having
to worry about running up your
utility bills. The built-in timer
allows you to preset the unit
to turn on and off in half-hour
increments.
Energy Saver Mode
Reduce your utility bills in this
mode. It cools similarly to central
air, with the unit turning on
and off at different intervals to
ensure the room temperature
stays at the set temperature.
Multi-Speed Fan
Features three different fan
speeds, for more cooling
flexibility.
Easy-to-Clean Washable Filter
apture dust from the air and keep your air
C
conditioner working efficiently with our easyto-clean washable filter.
Power Cord
Comes with an extra long three-prong cord —
makes extension cords unnecessary.
Eortless™ Restart
Automatically resumes operating at its previous
settings when power is restored to your unit.
Clean Filter Alert
Alert notifies you when your filter needs to be
cleaned so you don’t have to keep track of it
yourself.
Ready-Select® Controls
Easily select options with the touch
of a button.
PERFORMANCE BTUs
Cool 10,000 / 9,800
Heat 10,600 / 8,600
frigidaire.com
D
A
C
B
FFTH1022U2
Plug Type (NEMA)
6-20P
HOME COMFORT
THROUGH-THE-WALL AIR CONDITIONER/HEATER
PERFORMANCE
BTU (Cool) 10,000 / 9,800
BTU (Heat) 10,600 / 8,600
Dehumidification (Pints / Hour) 2.2
Cool Area (Up To Sq. Ft.) 450
Combined Energy Eciency Ratio 9.6
Energy Eciency Ratio 9.6
ELECTRICAL
Volts 230 / 208
Amps (Cool) 4.6 / 5.0
Amps (Heat) 15.8 / 14.5
Watts (Cool) 1,040 / 1,020
Watts (Heat) 3,450 / 2,820
Length of Power Cord (Min. / Max.) 5.5' / 6'
Plug Type (NEMA) LCDI (6-20P)
FEATURES
Electronic Controls Ready-Select® Controls
Fan Speeds (Cool / Fan / Heat) 3 / 3 / 3
Low Voltage Start-Up Yes
Auto Cool Function Yes
Energy Saver Mode Yes
Sleep Mode Yes
Filter Check Yes
24-Hour On / O Timer Yes
Clean Air Ionizer
Remote Control Full-Function with Heat
Air CFM (High / Med / Low) 290 / 265 / 253
Air Direction Control 6-Wa y
Fresh Air / Exhaust Vent / Closed No / No / Yes
Filter Type
Filter Access Slide-Out
Slide-Out Chassis
1
Warranty
Easy-to-Clean Washable
Filter
Yes
OPTIONAL ACCESSORIES
Through-The-Wall 18" Sleeve Kit PN # 5304514430
Trim Kit (for larger existing sleeve) Included
Architectural-Style Exterior Louvered Grille PN # 5304515640
CERTIFICATIONS
Performance AHAM
SPECIFICATIONS
Refrigerant R410a
Shipping Weight (Approx.) 91 Lbs.
1
Warranty five (5) years full parts and labor.
PRODUCT DIMENSIONS
A - Height 14-9/16"
B - Width 24"
C - Depth 20-5/8"
D - Max. Wall Thickness 18"
SLEEVE CUTOUT DIMENSIONS
Height 15-5/8"
Width 25-15/16"
•
USA
CANADA
10200 David Taylor Drive
•
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-800-FRIGIDAIRE
•
1-800-265-8352
•
frigidaire.com
•
frigidaire.ca
Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes.
Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com.
Specifications subject to change. Accessories information available on the web at frigidaire.com
© 2018 Electrolux Home Products, Inc.
FFTH1022U2 03/20
RAC Through-The-Wall “U” Models
Frigidaire Baseline
24"
14
9/16"
20
5/8"
Wall (thickness)
18"
max.
Wall
Through-The-Wall Installation
Adjustable
mounting
brackets
Locking clip
Sleeve-to-unit seal
Building construction support
Outside closure panel
Through-The-Wall 18" Sleeve Kit
(PN # 5304514430)
FFTH1022U2
Plug Type (NEMA)
6-20P
HOME COMFORT
THROUGH-THE-WALL AIR CONDITIONER/HEATER
•
Product Shipping Weight (approx.) – 91 Lbs.
•
Single phase 3-wire cable, 230 / 208 Volt, 60 Hertz AC only electrical supply
with ground required on separate circuit fused on both sides of line.
•
Amps @ 230 / 208 Volts = (Cool) 4.6 / 5.0 Amps / (Heat) 15.8 / 14.5 Amps
•
Recommended Circuit Breaker – 20 Amps
•
Unit equipped with 230 / 208V 3-wire power supply cord, NEMA plug type
6-20P, approximately 72” long.
•
Unit’s increased performance characteristics result from two rear intakes. For
unit to operate at maximum efficiency, carefully follow complete, detailed new
or replacement installation instructions provided in Product Installation Guide
on web.
•
Unit requires rearward slope when installation is complete, to allow
condensate to drain from rear of sleeve.
NEW INSTALLATION
•
For new installation, Frigidaire® Through-The-Wall 18" Sleeve Kit
PN # 5304514430 available. Recommended for proper installation.
•
Through-the-wall installation requires 18" maximum wall thickness.
•
For energy-saving purposes, install unit in shady location, preferably a
northern exposure; and do not block airflow inside with blinds, curtains or
furniture; or outside with shrubs, enclosures or other buildings.
•
USA
10200 David Taylor Drive
CANADA
•
5855 Terry Fox Way
•
•
Charlotte, NC 28262
Mississauga, ON L5V 3E4
INSTALLATION SPECIFICATIONS
REPLACEMENT INSTALLATION
•
When replacing existing air conditioner with new unit, refer to Product
Installation Guide on web to identify existing wall-sleeve manufacturer and
size compatibility. If proper installation and slope are suspect, then correct
installation of Frigidaire® Through-The-Wall 18” Sleeve Kit PN # 5304514430
recommended.
•
Use of existing wall sleeve to mount new unit requires original sleeve be
in sound structural condition with rear grille that attaches securely, or rear
flange that serves as stop for unit.
•
Preferable installation option, for increased efficiency and possibility of
drafts reduced, requires existing rear grille (mounted to sleeve) be replaced
•
1-800-FRIGIDAIRE
•
1-800-265-8352
•
frigidaire.com
•
frigidaire.ca
with new unit’s rear air-directional louvered grille (provided in accessory kit,
shipped with unit). Non-preferable installation option of directly mounting rear
louvered grille to unit can be considered, requiring grille be mounted to unit
prior to sleeve installation.
•
Existing decorative exterior grille may be left in place, provided that proper
air-directional rear louvered grille is installed.
•
For installation into larger existing sleeve, optional Trim Kit PN # EA120T available.
OPTIONAL ACCESSORIES
•
Through-The-Wall 18" Sleeve Kit – (PN # 5304514430).
•
Trim Kit (for larger existing sleeve) – Included.
•
Architectural-Style Exterior Louvered Grille – (PN # 5304515640).
Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes.
Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com.
Specifications subject to change. Accessories information available on the web at frigidaire.com
© 2018 Electrolux Home Products, Inc.
FFTH1022U2 03/20
Loading...